[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices

    Quote from Selz

    I am encountering an intermittent problem with all addons not responding.

    Remove Pirate Addons and you should be good to go.

    Easy as Hard Reset in Libreelec.

    Your box is full of them.:huh:

    Wrong thread

    Is it possible to fix resolution and framerate at startup?

    If I start S912 box before TV and AVR than I receive 720p60hz after LE started. But I need 1080p50Hz.

    I triedfw_setenv hdmimode 1080p50hz and fw_setenv outputmode 1080p50hz, but it doesn't work in that case

    Quote from boot2k3

    Is it possible to fix resolution and framerate at startup?

    If I start S912 box before TV and AVR than I receive 720p60hz after LE started. But I need 1080p50Hz.

    I triedfw_setenv hdmimode 1080p50hz and fw_setenv outputmode 1080p50hz, but it doesn't work in that case

    I am not sure but don’t you med to first start TV and AVR to be able to receive the correct HDMI handchake chain to the S912 box ?

    The box can then output the correct output to the TV matchning the video resolution and color depth.

    Quote from s25003

    I am not sure but don’t you med to first start TV and AVR to be able to receive the correct HDMI handchake chain to the S912 box ?

    The box can then output the correct output to the TV matchning the video resolution and color depth.

    I can, but my wife likes to press three power buttons in different sequences :)

    hello, just testing out on my Beelink GT1 2gb/16gb


    all fine, a part from the original remote which does not seem to work at all. using it now with generic usb airmouse/keyboard

    Thanks for the update

    please tell me

    in version 8 90 5 corrected the incorrect operation of the remote control in KIII pro?

    added or not to version 8 90 5 noise reduction and overclocking cpu and gpu?

    Tested new LE 8.90.5, updated from LibreELEC-S905.arm-9.0-devel-20180223155029-r28201-gea3b1a985, the picture quality is better than in previous versions, (very) minimal vertical banding in blue (gradient is test image). Everything what I tested is excellent but I found a bug in Display settings.

    Display settings in devel version:


    Display settings in 8.90.5:



    Nice job,

    Thank you.

    Looks like old fd628 driver used in 8.90.5 build, advanced settings in FD628 addon doesn't work for X92 device

    8 90 5

    kIII pro

    in the menu there is no choice of 420 10 bits and there is no setting to the noise reduction

    the remote control constantly jumps after a few lines