Ok, I attached pictures of my settings and the display on my receiver. What am I doing wrong?
Same settings used to pass all the digital audio just fine.BTW, I am using HDMI to my receiver.
That receiver does not accept some AC3/DTS modes.
Yesterday, my Sherlock episode lack sound because of it (I have the 775).
That receiver does not accept some AC3/DTS modes.
Yesterday, my Sherlock episode lack sound because of it (I have the 775).
It's an RX-V671 and up to now it has accepted anything I have thrown at it
It's an RX-V671 and up to now it has accepted anything I have thrown at it
I've got an RX-V667 and with one box had to toggle sometimes between HDMI inputs on the receiver, and wait a few seconds to get sound. (something with HDMI sync I think). Not the best workaround, but worth a try.
kszaq Don't know if you saw my post before, but spotify connect web doesn't work with the built in sound drivers for the 905, but will with an external usb headphones, so something isn't right with the ALSA mixer in your build.
Here is when I run the config wizard, and select the USB sound device, I can then pick a mixer, and all works well.
When I try to pick any of the options for the 905 sound via HDMI, I get no mixer selection, and the service doesn't start.
Since it's capable of working with USB sound, it has to be something simple. Any ideas.
Anyone else having a problem with videos freezing in the last 3 sec of the video. Audio continues to play with frozen video. Its not crashing the box, and not a big deal, just curious if im the only one.
This didnt happen on any of the 7.0.3.012 builds.
Tronsmart S95x box.
That receiver does not accept some AC3/DTS modes.
Yesterday, my Sherlock episode lack sound because of it (I have the 775).
For DVB audio is used only MP2 or AC3 in 2.0 or 5.1, some providers are testing AAC.
I am sure you have something wrong set-up.
An example of wrong setup, probably your case:
- enabled "Sync playback to display";
- enabled audio passthrough;
- disabled AC3 transcoding;
- receiver connected via SPDIF
For audio AC3 5.1 -> no sound.
Explanation:
Enabled "Sync playback to display" decode AC3 5.1 to Multichannel PCM. Disabled transcoding to AC3 and enabled passthrough means the output format is Multichannel PCM. SPDIF is capable only stereo PCM -> no sound.
For DVB audio is used only MP2 or AC3 in 2.0 or 5.1, some providers are testing AAC.
Are you talking about one specific country?
If not then AAC audio is in use, and has been for years, on DVB-T and DVB-T2 broadcasts in many European countries, and has long since ceased testing.
All Freeview HD channels (on-air since around 2009) in the UK are using AAC 2.0 or 5.1 - BBC One HD, BBC Two HD, ITV HD, C4 HD, C5 HD etc. on DVB-T2.
In Norway, AAC has been used since the launch of their digital platform. Similarly Ireland and New Zealand use AAC.
In most countries, MP2 audio is used for SD MPEG2 services on DVB-T that launched in the late 90s and early-to-mid 00s, with either MP2, AC3 (Dolby Digital), E-AC3 (Dolby Digital +) or AAC used for SD and HD services that use H264 or H265 video encoding that launched more recently.
Anyone else having a problem with videos freezing in the last 3 sec of the video. Audio continues to play with frozen video. Its not crashing the box, and not a big deal, just curious if im the only one.
This didnt happen on any of the 7.0.3.012 builds.
Tronsmart S95x box.
Yes, I see this as well. As you say, not a big deal, just a bit annoying.
Yes, I see this as well. As you say, not a big deal, just a bit annoying.
I can confirm too. Picture freezes and audio continues in the last seconds.
Yes, I see this as well. As you say, not a big deal, just a bit annoying.
Same problem here indeed. Not a real problem for movies and TV shows but it is a problem for short internet videos that I watch through plugins and are sometimes only 10 to 15 seconds long.
Spotify Connect Bug (Internal Soundcard/Mixer Problem) // S905X
Spotify Connect dont work with internal Sound Hardware. But when a USB Soundcard is connected, everything is working. Seems its the "Digital DAC".
Internal Soundcard (error):
HTPC:~ # spotify-connect-web.start
Simple mixer control 'DAC Digital',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 204 [80%] [-187.50dB]
Front Right: Playback 204 [80%] [-187.50dB]
Loading Spotify library...
Established under name 'TestConnect'
Traceback (most recent call last):
File "loader.py", line 3, in <module>
File "runpy.py", line 180, in run_module
File "runpy.py", line 72, in _run_code
File "/storage/.kodi/addons/service.spotify-connect-web/main.py", line 14, in <module>
from connect import Connect
File "/storage/.kodi/addons/service.spotify-connect-web/connect.py", line 9, in <module>
from console_callbacks import audio_arg_parser, mixer, error_callback, connection_callbacks, debug_callbacks, playback_callbacks, playback_setup
File "/storage/.kodi/addons/service.spotify-connect-web/console_callbacks.py", line 104, in <module>
mixer = alsa.Mixer(args.mixer, **mixer_card_arg)
alsaaudio.ALSAAudioError: Unable to find mixer control DAC,0 [default]
Failed to execute script loaderExternal USB Soundcard (working)
HTPC:~ # spotify-connect-web.start
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 151
Mono:
Front Left: Playback 121 [80%] [-5.69dB] [on]
Front Right: Playback 121 [80%] [-5.69dB] [on]
Loading Spotify library...
Established under name 'TestConnect'
min_volume_range: 0.0
Using libspotify_embedded version: release-esdk-1.20.0-v1.20.0-g594175d4
SpInit: 0
playback_volume: 52428
corected_playback_volume: 80
public key: #deleted
device id: #deleted
remote name: HTPC
account req: PREMIUM
device type: AUDIODONGLE
kSpConnectionNotifyLoggedIn
#deleted
kSpPlaybackNotifyPlay
playback_seek: 40899
kSpPlaybackNotifyTrackChanged
192.168.1.5 - - [2017-02-15 16:47:33] "GET /login/_zeroconf?action=getInfo HTTP/1.1" 200 601 0.071360
kSpPlaybackNotifyBecameActive
kSpPlaybackNotifyTrackChanged
playback_seek: 54781
kSpPlaybackEventAudioFlush
kSpPlaybackNotifyPlay
AlsaSink: device acquired
192.168.1.5 - - [2017-02-15 16:47:35] "GET /login/_zeroconf?action=getInfo HTTP/1.1" 200 601 0.028044
192.168.1.5 - - [2017-02-15 16:47:36] "GET /login/_zeroconf?action=getInfo HTTP/1.1" 200 601 0.025825
.
.
...working :-)On USB-Soundcard i can pick as mixer "microphone" or "speaker"
On Internal Soundcard i can just pick "Digitl DAC" and its not working.
Hopefully it get fixed 
kszaq: hopefully its now right 
sorry
Same Problem here.... Spotify Connect don´t work with build in Hardware. Hopefully it will be fixed
You need to read this: thread-981.html
Hi kszaq,
Thanks for these builds. They work great on my Nexbox A95x S905x box. Although, I did just notice an issue.
I leave my box on 24/7. Yesterday, I noticed that kodi service (just the service not the box) has been restarting itself every once in a while (while idle, with the screen off). Yesterday, it happened at 5:41pm and again at 11:45pm. Memory usage is very low at around 28% (2GB version).
Here's the crashlog: GBZW
I do have a couple of docker containers running in the background (they have been uninterrupted through these kodi restarts). Not many other addons otherwise and the box is mostly a fresh build (got it a few days ago). Is there anything in the crashlog that suggests an issue?
In the meantime, I'll keep monitoring and will provide a debug log later.
Thanks
EDIT: Journaltcl gave me this for the time of the last crash:
Feb 14 23:45:26 Nexbox kernel: kodi.bin[28872]: unhandled level 1 translation fault (11) at 0x66343765, esr 0x92000005
Feb 14 23:45:26 Nexbox kernel: pgd = ffffffc04ca66000
Feb 14 23:45:26 Nexbox kernel: [66343765] *pgd=0000000000000000
Feb 14 23:45:26 Nexbox kernel:
Feb 14 23:45:26 Nexbox kernel: CPU: 3 PID: 28872 Comm: kodi.bin Tainted: G O 3.14.29 #1
Feb 14 23:45:26 Nexbox kernel: task: ffffffc05207c000 ti: ffffffc064abc000 task.ti: ffffffc064abc000
Feb 14 23:45:26 Nexbox kernel: PC is at 0x3dabd4
Feb 14 23:45:26 Nexbox kernel: LR is at 0x3b2219
Feb 14 23:45:26 Nexbox kernel: pc : [<00000000003dabd4>] lr : [<00000000003b2219>] pstate: 28000030
Feb 14 23:45:26 Nexbox kernel: sp : 00000000e2c00c28
Feb 14 23:45:26 Nexbox kernel: x12: 00000000000070c8
Feb 14 23:45:26 Nexbox kernel: x11: 00000000e2c00edc x10: 0000000000001000
Feb 14 23:45:26 Nexbox kernel: x9 : 0000000000000000 x8 : 0000000000000001
Feb 14 23:45:26 Nexbox kernel: x7 : 0000000066343765 x6 : 0000000066343764
Feb 14 23:45:26 Nexbox kernel: x5 : 00000000ee802a48 x4 : 00000000f437eee0
Feb 14 23:45:26 Nexbox kernel: x3 : 00000000011b2d68 x2 : 0000000000000000
Feb 14 23:45:26 Nexbox kernel: x1 : 0000000066343765 x0 : 0000000000000063
Feb 14 23:45:26 Nexbox kernel:
Feb 14 23:45:35 Nexbox kodi.sh[28830]: Segmentation fault (core dumped)
Feb 14 23:45:38 Nexbox kodi.sh[28830]: Crash report available at /storage/.kodi/temp/kodi_crashlog_20170214234535.logI have succesfully installed LibreElec on the TANIX TX5 PRO and its working great!
Unfortunately I can't figure out how to apply advancedsettings.xml
It seems like Kodi does not recognize it.
The script is in Userdata folder wich is visible on my PC via SMB.
Script has been working with Android so im sure it has no mistakes:
<advancedsettings>
<splash>false</splash>
<video>
<latency>
<refresh>
<rate>24</rate>
<delay>125</delay>
</refresh>
</latency>
</video>
</advancedsettings>Maybe I'm putting it in the wrong location? Right now it's \\Libreelec\Userdata\
Same problem here indeed. Not a real problem for movies and TV shows but it is a problem for short internet videos that I watch through plugins and are sometimes only 10 to 15 seconds long.
I can confirm exactly the same problem playing short video's with the 7.95.beta images on my 905.
I have succesfully installed LibreElec on the TANIX TX5 PRO and its working great!
Unfortunately I can't figure out how to apply advancedsettings.xml
It seems like Kodi does not recognize it.
The script is in Userdata folder wich is visible on my PC via SMB.
Script has been working with Android so im sure it has no mistakes:
Following is my advancedsettings.xml video section, which works fine to delay the audio by 175ms for 23.976/24fps content.
<advancedsettings>
<splash>false</splash>
<video>
<playcountminimumpercent>88</playcountminimumpercent>
<ignoresecondsatstart>210</ignoresecondsatstart>
<ignorepercentatend>12</ignorepercentatend>
<latency>
<delay>0</delay>
<refresh>
<min>23</min>
<max>24</max>
<delay>175</delay> <!-- set to zero or adjust if audio seems out of sync with 24p movies -->
</refresh>
</latency>
</video>
</advancedsettings>Following is my advancedsettings.xml video section, which works fine to delay the audio by 175ms for 23.976/24fps content.
Code<advancedsettings> <splash>false</splash> <video> <playcountminimumpercent>88</playcountminimumpercent> <ignoresecondsatstart>210</ignoresecondsatstart> <ignorepercentatend>12</ignorepercentatend> <latency> <delay>0</delay> <refresh> <min>23</min> <max>24</max> <delay>175</delay> <!-- set to zero or adjust if audio seems out of sync with 24p movies --> </refresh> </latency> </video> </advancedsettings>
It's not working at all in my case. Even the splash screen is still visible.
What is the location of your advancedsetting.xml?
It's not working at all in my case. Even the splash screen is still visible.
What is the location of your advancedsetting.xml?
It's advancedsettings.xml no advancedsetting.xml and goes in \\IPADDRESS\Userdata
Make sure its called just advancedsettings.xml and Windows hasn't given it a hidden extension such as .txt.
