Hey there,
thank you for the possibility to use kodi leia on libreelec, even with an alpha version. Really appreciate that.
Simple (hopefullly) question: I saw ppl are able to get the lcd-display working on their boxes with your build. I have a T95-Max box and wonder if i can make it work on that one, too? Is there something special to implement, do i need specific drivers to be enabled?
Atm the display only works when booting into android, but not in libreelec.
Display MoreHey there,
thank you for the possibility to use kodi leia on libreelec, even with an alpha version. Really appreciate that.
Simple (hopefullly) question: I saw ppl are able to get the lcd-display working on their boxes with your build. I have a T95-Max box and wonder if i can make it work on that one, too? Is there something special to implement, do i need specific drivers to be enabled?
Atm the display only works when booting into android, but not in libreelec.
OMG, thanks for pointing me there! *thumbs_up*
Added FD628 Display addon and it works like a charm. Perfect! 
mh.. edit: was too fast with my euphoria. Display started when enabling the addon, but time was not correctly displayed. In fact it stayed at 08:14 pm. After a shutdown it's black again. 
Currently, I have an MXQ Pro S905 TV Box with 1/8 GB RAM/eMMC running on the last version of LE v8.2.3.1 with a device tree of gxbb_p200_1G_mxq_pro_4k.dtb (S905). Right now, I would like to try LE 9.x (from here), but I did not find any DTB image from here for this device. Since my device has only 1 GB RAM, I tried all the 1GB version DTB images from the device tree to no avail (ended up with debugging messages). I certainly will appreciate if anyone here who has managed to run LE 9 on an MXQ Pro can lend some hands on which DTB version for an MXQ Pro to use.
Hello, I have mecool m8s pro+ and I copyied file remote.conf to "Configfiles" folder like in this video
Hello, I have mecool m8s pro+ and I copyied file remote.conf to "Configfiles" folder like in this video
but my IR still not working. What should I do to work IR?External Content www.youtube.comContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.
Please read...
You have to take a look update Common Amlogic GX Project by superna9999 · Pull Request #2125 · LibreELEC/LibreELEC.tv · GitHub
The video problem has already been overcome in the mainline kernel ?
mainline kernel does not support h/w decoding
Please point out both files for WP2 on SD card, which burn to card and dtb
Please point out both files for WP2 on SD card, which burn to card and dtb
SOC:Amlogic S905
RAM: 2 GB DDR3
Gigabit Ethernet
Have you tried gxbb_p200_2G_1Gbit.dtb
SOC:Amlogic S905
RAM: 2 GB DDR3
Gigabit Ethernet
Have you tried gxbb_p200_2G_1Gbit.dtb
I try this, but, not work, while, other builds working
I try this, but, not work, while, other builds working
You may have to go to [8.90.4] LibreELEC 9.0 Alpha for S905/S912 devices
Then ask members who have this Hardware. There was a Development build which worked for them.
I think it's been pulled off the server but members may have it for you to share.
Is it possible to set the screensaver dim value to less then 20% somehow? (was possible in early builds, now 20 is minimum)
Hello..just to say thank you..everything works on nexbox 1/8..even netflix..wondering does anyone been able to make work hbo go?
got some trouble updating from 8.2 and didnt found a solution searching in the forum, maybe is already posted but:
upgrading from 8.2.3.1 is failing using 8.90.4, but 8.2.3.1 -> 8.90.0 -> 8.90.4 is working
Display Morebelaid38 zbigzbig20 new devel version for you to try here.
Some important notes before flashing for you guys and some others.
The kernel in this dev image has been changed from kszaq/8.2 to official LE/9.0 pre-alpha, this is a big change and something I have held off from changing to for a couple of reasons which are listed below.
If you have LE installed to internal this image will not boot as the partition layout in the DTB is different. You can still install to internal but you will have to boot from SD and then re-run the scripts and if you go back to another image then you will have to do the same again.
Devices with NAND will not be able to run LE from internal memory due to the LE kernel having no NAND driver.
There may be frame drops/skips with certain content however I can't say with 100% certainty that this will be the case because it has been some time since I last tested it.
DTB will require updating or your box will not boot however this should be done automatically as part of the upgrade process.
If flashing this image, I very HIGHLY recommend making a back up.
If your device boots following the upgrade then I expect this to run just as well as any other release, I make these notes just so you are forewarned. DO NOT complain, if your box goes bang!!
I wanted to report that this devel update works very good with my 905x box, no playback issues. I had hdmi-cec (LG TV remote) and screensaver problems with the previous builds which are gone now. (had to reset the cec driver)
LibreELEC-S912.arm-8.2-8.2.2.3.img + gxm_q200_2g_minix_neo_u9.dtb
Flashed to a 16GB USB Stick booted into my Minix U9-H.
Functions fairly well except for only playing audio in stereo. When I select 5.0 channels, I lose the center channel when playing 5.1 video streams.
Pandoki only plays one selection for any of my radio stations.
I've generated and attached a log of these two problems. Hopefully it will give you enough information to further enhance this build.
Thank you for the work you're doing.
Please read...
Unfortunately remote.conf don't work with this build on mecool m8s pro+. I installed 9.0-Leia-testing-Gendo-20-10-2017 and LibreELEC-S905.arm-8.2-8.2.3.1 and there remote working on start.
Unfortunately remote.conf don't work with this build on mecool m8s pro+. I installed 9.0-Leia-testing-Gendo-20-10-2017 and LibreELEC-S905.arm-8.2-8.2.3.1 and there remote working on start.
in that case you are doing something wrong.
1. You need to use latest dtb (Device tree) for 8.90.4 build
2. You need to config you remote as described in LE9.0 remote configs ir-keytable Amlogic devices. (remote.conf doesn't work anymore)
