[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices

  • Ho modificato il driver Tanix. Funziona bene, ma la mappa era un po 'diversa.


    È ancora molto lavoro in corso. Anche la mia build si basa su LE 7.0.12l, non 8.90.2.

    Che TV Box hai? Questo display è molto comune, ma ogni box può averlo collegato in modo diverso all'interno, quindi ciò che funziona per una casella non funzionerà con un'altra.

    Se si dispone di un T95M, provare questo albero dei dispositivi con LE 8.90.2 e verificare se il display si illumina o meno.

    I have a m8s pro 4k with s905x

    Edited once, last by hashmaker: just test with your dtb.img , start boot but android from internal and clock work :( im sorry ().

  • Do not enable "sync playback to display" !!! This is already done as part of amcodec and will cause issues. Please try the test build by afl1

    enabled or disabled doesnt make a real difference on my device.

    in both cases audio speeds up and slows down like a broken turntable when using the gui (scrolling through menus, entering text in textboxes, etc) at the same time.

    sometimes more, sometimes less.

    when i dont touch anything audio and video play fine, mostly.

    every couple days it happens all the time and i have to reboot the machine.


    if it is part of amcodec why doesnt it "sync" 24p video to 50hz?

    when "sync playback to display" is disabled i get the normal 24p 1 seconds stutter on 24p video files.


    with the test build i had much more problems.

    e.g. mpeg 2 channels had no sound and playback freezed after some seconds.

  • I have a m8s pro 4k with s905x

    I didn't understand your edit, but I can't really help you with this.

    If you can go into android and send me the contents of the /proc/device-tree/fd628_dev folder, I may be able to make a custom device tree for you to try.

  • My test builds are only for fixing issue with pvr.mythtv and there are tested issue with pts overflow handling. AMLCodec uses only 31 bits counters for pts in 1/90000 sec units. After every 6 hour 38 minutes of playback the counter is overflow. Normal movies playback starts from 0 sec, but pvr.mythtv starts from any possible pts value (64bits).

    For verifying a/v sync issues use OSD debugging (Ctrl-Shift-O). In third line 'a/v:' shows difference in sec.


  • I have no clue about your first issue, without a way to reproduce what your experiencing then there is very little that can be done.

    24p video is supposed to play at 24hz that is why it doesn't sync to 50hz... 24p - Wikipedia

    I have just tested all of the MPEG2 samples @ Samples - Official Kodi Wiki and can not reproduce your last issue either, I think you may have a faulty box.

  • Hi Guys, Any one know why stalker is not player, the channel and epg download nicely, I can see the channels list but when tried to lunch a channels it won't play, I kept getting error message. Please help, I'm not sure if I should report the issue in Stalker PVR forum or what is the alternatives or solutions

    Appreciate any suggestions

    Cheers!


    full log

    Ubuntu Pastebin



    19:32:56.334 T:3989971856 NOTICE: PVR Manager: Starting

    19:32:56.529 T:3998360464 ERROR: ## LibreELEC Addon ## oe::load_url(releases.json) ## ERROR: (HTTPError())

    19:32:56.530 T:3998360464 ERROR: Traceback (most recent call last):

    File "/home/adamg/repos/LibreELEC/build.LibreELEC-S905.arm-8.90.2/LibreELEC-settings-b13dbf3/.install_pkg/usr/share/kodi/addons/service.libreelec.settings/oe.py", line 271, in load_url

    File "/usr/lib/python2.7/urllib2.py", line 154, in urlopen

    File "/usr/lib/python2.7/urllib2.py", line 435, in open

    File "/usr/lib/python2.7/urllib2.py", line 548, in http_response

    File "/usr/lib/python2.7/urllib2.py", line 473, in error

    File "/usr/lib/python2.7/urllib2.py", line 407, in _call_chain

    File "/usr/lib/python2.7/urllib2.py", line 556, in http_error_default

    HTTPError: HTTP Error 404: Not Found

    19:33:01.161 T:3795579792 NOTICE: PVR Manager: Started

    19:33:01.163 T:4020855696 NOTICE: Start - EPG thread started

    19:33:11.510 T:4099997712 NOTICE: VideoPlayer::OpenFile: pvr://channels/tv/All channels/pvr.stalker_954094258.pvr

    19:33:11.532 T:3636306832 NOTICE: Creating InputStream

    19:33:11.533 T:3636306832 NOTICE: CDVDInputStreamPVRManager - Playback of deleted recordings is not possible (pvr://stream/954094258)

    19:33:11.534 T:3636306832 ERROR: CVideoPlayer::OpenInputStream - error opening [pvr://channels/tv/All channels/pvr.stalker_954094258.pvr]

    19:33:11.534 T:3636306832 NOTICE: CVideoPlayer::OnExit()

    19:33:30.041 T:4099997712 NOTICE: VideoPlayer::OpenFile: pvr://channels/tv/All channels/pvr.stalker_868340257.pvr

    19:33:30.064 T:3627918224 NOTICE: Creating InputStream

    19:33:30.065 T:3627918224 NOTICE: CDVDInputStreamPVRManager - Playback of deleted recordings is not possible (pvr://stream/868340257)

    19:33:30.066 T:3627918224 ERROR: CVideoPlayer::OpenInputStream - error opening [pvr://channels/tv/All channels/pvr.stalker_868340257.pvr]

    19:33:30.066 T:3627918224 NOTICE: CVideoPlayer::OnExit()

    19:33:42.753 T:4099997712 NOTICE: VideoPlayer::OpenFile: pvr://channels/tv/All channels/pvr.stalker_967153794.pvr

    19:33:42.776 T:3627918224 NOTICE: Creating InputStream

    19:33:42.778 T:3627918224 NOTICE: CDVDInputStreamPVRManager - Playback of deleted recordings is not possible (pvr://stream/967153794)

    19:33:42.778 T:3627918224 ERROR: CVideoPlayer::OpenInputStream - error opening [pvr://channels/tv/All channels/pvr.stalker_967153794.pvr]

    19:33:42.778 T:3627918224 NOTICE: CVideoPlayer::OnExit()

    Edited once, last by e123enitan ().

  • You have just stated the obvious. You need to mount the newer version to get the file, I already told you this, I would upload it but I have no access to a computer, the DTBs are all different on major Kodi versions due to changes in the kernel if you do not use the correct DTB it will not boot!

    Sorry, it was not clear to me that i have to mount the newer version. And it still makes somehow no sense to me:

    If I try to run the newer version (the version I'm trying to install/update?), and it does not work: why should I try to extract the DTB from it?

    I guess you referenced a "working new version", but I don't have one. --> still confused a bit.


    alex0801 try the following DTB

    Thanks, I will try this.

    But to understand it completely: From which version did you extract this?

  • Sorry, it was not clear to me that i have to mount the newer version. And it still makes somehow no sense to me:

    If I try to run the newer version (the version I'm trying to install/update?), and it does not work: why should I try to extract the DTB from it?

    I guess you referenced a "working new version", but I don't have one. --> still confused a bit.


    Thanks, I will try this.

    But to understand it completely: From which version did you extract this?

    I didn't extract it from any version, it's direct from the source, please don't get confused I only asked you to do that because I didn't have access to a computer to send you the file yesterday.

  • (Sorry for the late answer...)


    I am currently on the previous version, 8,90.1

    You should be having no issues then, I checked before I made the release that it would upgrade from .1 to .2, the only thing I can suggest is to turn automatic updates off or do a clean install.

  • You should be having no issues then, I checked before I made the release that it would upgrade from .1 to .2, the only thing I can suggest is to turn automatic updates off or do a clean install.

    Yeah, I don't understand why it can't update. :/ Thanks for the answer, I think I will wait for some other releases, and then perform a clean install.

    Anyway tahnk you for your work, I really appreciate it. :thumbup:

  • Hey GDPR-2 , I updated to your latest build on my two Minix U1s the other day. Since then I'm having some issues. I dont think its necessarily your build but as its what I have installed... I didnt have these issues on the previous build (8.90.1)


    First, I have my library on a MySQL server (and share the xml files, advanced, sources etc on the two boxes). Now when I start up, more often than not it will not load the library. If I reboot then sometimes it will load the library.


    Second, sometimes when I click to start playing a video it will jump back to the "main menu".


    Also, just wanted to say I love your build, keep up the good work!

    2xMinix U1, Onkyo NR626 and Samsung 40" 4K TV

  • Have you checked 'wait for network' is enabled in LE-settings?

  • I didn't extract it from any version, it's direct from the source, please don't get confused I only asked you to do that because I didn't have access to a computer to send you the file yesterday.

    Downloaded your dtb, copied it to libreelec partition, named it dtb.img ... tried to boot... still stuck at mxqpro logo :-(

  • Code
    1. 2018-01-19 09:41:15.015 xmltv: /storage/.kodi/addons/service.tvheadend42/bin/tv_grab_file: grab /storage/.kodi/addons/service.tvheadend42/bin/tv_grab_file
    2. 2018-01-19 09:41:15.023 spawn: Executing "/storage/.kodi/addons/service.tvheadend42/bin/tv_grab_file"
    3. 2018-01-19 09:41:15.265 xmltv: /storage/.kodi/addons/service.tvheadend42/bin/tv_grab_file: no output detected
    4. 2018-01-19 09:41:15.265 xmltv: /storage/.kodi/addons/service.tvheadend42/bin/tv_grab_file: grab returned no data

    Seems that tv_grab_file can't parse the settings.xml file. Can someone confirm?


    I would suggest to change from:


    Code
    1. ADDON_HOME="$HOME/.kodi/userdata/addon_data/service.tvheadend42"
    2. ADDON_SETTINGS="$ADDON_HOME/settings.xml"
    3. XMLTV_TYPE=`grep XMLTV_TYPE $ADDON_SETTINGS | awk '{print $3 }' | sed -e "s,value=,," -e "s,\",,g"`
    4. XMLTV_LOCATION_FILE=`grep XMLTV_LOCATION_FILE $ADDON_SETTINGS | awk '{print $3 }' | sed -e "s,value=,," -e "s,\",,g"`
    5. XMLTV_LOCATION_WEB=`grep XMLTV_LOCATION_WEB $ADDON_SETTINGS | awk '{print $3 }' | sed -e "s,value=,," -e "s,\",,g"`
    6. XMLTV_LOCATION_SCRIPT=`grep XMLTV_LOCATION_SCRIPT $ADDON_SETTINGS | awk '{print $3 }' | sed -e "s,value=,," -e "s,\",,g"`

    TO

    Code
    1. ADDON_HOME="$HOME/.kodi/userdata/addon_data/service.tvheadend42"
    2. ADDON_SETTINGS="$ADDON_HOME/settings.xml"
    3. XMLTV_TYPE=`xml sel -t -v '//settings/setting[@id="XMLTV_TYPE"]' -nl $ADDON_SETTINGS`
    4. XMLTV_LOCATION_FILE=`xml sel -t -v '//settings/setting[@id="XMLTV_LOCATION_FILE"]' -nl $ADDON_SETTINGS`
    5. XMLTV_LOCATION_WEB=`xml sel -t -v '//settings/setting[@id="XMLTV_LOCATION_WEB"]' -nl $ADDON_SETTINGS`
    6. XMLTV_LOCATION_SCRIPT=`xml sel -t -v '//settings/setting[@id="XMLTV_LOCATION_SCRIPT"]' -nl $ADDON_SETTINGS`
  • I've had no issues with a VPN and updates. Not sure which VPN manager you use but I have used Zomboided's for quite some time and it has worked great.

    Thanks, that's interesting as I also use the one from Zomboid, on the M8S pro+, (also on K2 & K1 pro, MiniMx, and Beelink MiniMx III) and none of them will auto update via the VPN service, all will display notification but will not auto download unless I Disconnect the VPN.