[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices

Quote from The Coolest

dodo95

That "snow" looks like a bad HDMI cable. If for whatever reason the new build uses a higher bandwidth video setting (like RGB or higher chroma) than the previous.

You're right.

I have three identical cables and one of them is having problems.

Quote from adamg

New DTB is for new release not old release! It's in the README!!!

In fact i Know it just tried to see what it happens, at least it boots - so far only remote failed .. but i tried just for fun.

Btw, just like what erbas posted before, if i'm running on internal nand on kii for example, how did i know if i'm on the right dtb ?

find out the /dev/dtb - but is not code i can read, lot of code mixed with chars and some texts ...

The same for /sys/class/dtb/emmcdtb

... and find out a lot ( almost every dtb on usr/share/bootloader/ ) how do i know i'm on the right version, to replace or play with ?

isn't it supposed to be on something like /flash/ ??

according to the log, there's a broken url called during the autoupdate check:

17:36:09.131 T:3999265680   ERROR: ## LibreELEC Addon ## oe::load_url(http://kodi.adamg.co.uk/libreelec/releases/releases.json) ## ERROR: (HTTPError())
17:36:09.132 T:3999265680   ERROR: Traceback (most recent call last):
                                              File "/home/adamg/LibreELEC/build.LibreELEC-S905.arm-8.90.4/LibreELEC-settings-d658777/.install_pkg/usr/share/kodi/addons/service.libreelec.settings/oe.py", line 271, in load_url
                                              File "/usr/lib/python2.7/urllib2.py", line 154, in urlopen
                                              File "/usr/lib/python2.7/urllib2.py", line 435, in open
                                              File "/usr/lib/python2.7/urllib2.py", line 548, in http_response
                                              File "/usr/lib/python2.7/urllib2.py", line 467, in error
                                              File "/usr/lib/python2.7/urllib2.py", line 407, in _call_chain
                                              File "/usr/lib/python2.7/urllib2.py", line 654, in http_error_302
                                              File "/usr/lib/python2.7/urllib2.py", line 435, in open
                                              File "/usr/lib/python2.7/urllib2.py", line 548, in http_response
                                              File "/usr/lib/python2.7/urllib2.py", line 467, in error
                                              File "/usr/lib/python2.7/urllib2.py", line 407, in _call_chain
                                              File "/usr/lib/python2.7/urllib2.py", line 654, in http_error_302
                                              File "/usr/lib/python2.7/urllib2.py", line 435, in open
                                              File "/usr/lib/python2.7/urllib2.py", line 548, in http_response
                                              File "/usr/lib/python2.7/urllib2.py", line 473, in error
                                              File "/usr/lib/python2.7/urllib2.py", line 407, in _call_chain
                                              File "/usr/lib/python2.7/urllib2.py", line 556, in http_error_default
                                            HTTPError: HTTP Error 404: Not Found

maybe this is a leftover from my 8.2 inplace upgrade? defined in /usr/share/kodi/addons/service.libreelec.settings/defaults.py

Netflix is not working anymore since I did a fresh install. Not sure what happened.

Quote from adamg

Libwidevine is no longer provided automatically and you have to install it manually

In this thread there was a newer version but it's not available for download anymore. Where can I find/download the latest relevant version?

Noted that the Developer is no longer on distribution, yet FYI working great on my MXQ Pro Quickplay 1\8 !

Quote from adamg

I would appreciate some feedback from anybody with a S905W box with issues with interlaced content, I have added an option to disable aml deinterlacing to Kodi under Settings>System>Display, just enable the option at the bottom and reboot and then test the content.

Removed autostart sh

Enabled in settings

Worked on TX3 Mini

Quote from Gregoir3

In this thread there was a newer version but it's not available for download anymore. Where can I find/download the latest relevant version?

I used this to install libwidevine.

• wget http://nmacleod.com/public/libreelec/getwidevine.sh
• sh getwidevine.sh

Despite that, Netflix addon didn't start...

@knarzi

install repository.netflix-1.0.1, then install netflix.plugin from it

Now new version of Tvheadend in latest build ?

Quote from bumerc

@knarzi

install repository.netflix-1.0.1, then install netflix.plugin from it

Okay. You really thought, that I didn't install it? I installed it for sure. As I wrote: the addon won't start, nothing happens, only an error message.

(Just before: I have a Netflix access, and it works on another devices.)

Quote from Rizwan

Now new version of Tvheadend in latest build ?

tvheadend44-9.0.1.120 is fixed version for TVH 4.3.

Quote from afl1

tvheadend44-9.0.1.120 is fixed version for TVH 4.3.

Non-Functional

some cas are not connecting

CAPMT (DVBAPI network linux) do not work

Loss of connection

The channels disappear and come back

LINUX DVBCAM CLIENT connects but I have not established a connection!

Tvheadend Unavailable server

Box KI Pro

Quote from adamg

This is old version of libwidevine and does not work for Amazon VOD.

And how/where can I get the new version?