[x86-64][LibreELEC x CB1 Builds] Dolby Vision FEL, HDR10+ and Full 3D

  • I pre-ordered a Luma video processor, and wondering if I would really benefit from it with my projector.

    Sorry for the offtopic but... have you checked with them about DTS? Because for audio they state, and I quote: "Audio passthrough — byte for byte: LPCM to 7.1, Dolby Digital, Dolby Digital Plus and TrueHD with Atmos. Lip sync adjustment."

    No mention at all of DTS formats. Considering how LG is handling stuff, I wouldn't give that for granted.

  • Sorry for the offtopic but... have you checked with them about DTS? Because for audio they state, and I quote: "Audio passthrough — byte for byte: LPCM to 7.1, Dolby Digital, Dolby Digital Plus and TrueHD with Atmos. Lip sync adjustment."

    No mention at all of DTS formats. Considering how LG is handling stuff, I wouldn't give that for granted.

    They've been non-responsive likely given the volume of interest and queries they're getting since pre-orders started recently. Will probably keep my order just to check it out. And sell it if I decide not to keep it.

  • I tried HLG -> DV, but unfortunately the GPU hits 100% usage and it stutters.

    I think my 7430U is too weak for that.

    Its not. Probably needs latest drivers in Linux 7.3.4. Lots of Ryzen work in recent Linux and coming in 7.4

    Does your device support dual channel RAM? That's the bottleneck. 2 x 4GB much faster than 1x8 or 1 x 16 etc

  • Roby77 as i promised to send info about black screen with my denon x4800h.

    i tried minix u22-xj with CoreElec panal build t4c, playing movies over 1gbit network via smb-share from windows 10....i still se black screen starting and stopping playback, for about 2 seconds.

    with 3400g amd cpu with hades and croque builds, i still see black screens. about 3 seconds, with the same network, files and smb-storage on windows 10.

    setting denon 4k/8k signal format from STANDARD, ENHANCED or 8K ENHANCED doesn't do much. maybe black screen difference about lesser than half seconds.


    we all know the "known hdmi bug" in denon xx700-serie (x1700, x2700, x3700, x4700). but x800-serie shouldn't have any hdmi problems.


    and to be honest.....i don't have "issue" with black screen when it takes about 5 seconds. issue = annoying

    Edited once, last by testmest (November 18, 2026 at 8:31 PM).

  • Thank you really much for your test...i really appreciate

    No problem also for me with homatics 4k and CE but last day i see here a user talking about It with recent Le build and i got scared :D

    (The old black screen bug was.with my denon x1000 and i get black screen until.i restart Kodi via remote Key shortcut...the best solution i found out and i see the user sky42 do a script with another trick to solve It)

    sky42
    August 24, 2026 at 1:22 PM

    Thanks again and sorry to all for my ot

  • Thanks CroqueMr for the release. It's fantastic.
    My setup is TV LG G6, Denon AVR, ASUS NUC Ultra 7 225H.
    I have one issue with the NUC connected trought the Denon HDMI. When i start the NUC, i see the BIOS screen and then the video output don't switch to the TV. I can't see the setup screen. I need to switch off and on several time the Denon to view the setup screen. The same with LiibreELEC installed on the system. I see the home screen only if I turn off and on the Denon many times.
    But, if i connect the NUC directly to the TV, it's all fine.
    My Denon is the avr 110 anniversary edition.

    I have try with a Windows 11 USB Stick, and works.
    It's a generic problem of LibreElec?

    Thanks

  • This is why I'll never forgive LG for not enabling DTS passthrough for E-ARC.

    If you have 2 hdmi outs you can use one for video directly to the TV and the other to the AVR for audio. But it is a bit of a faff as it requires switching inputs on your AVR and TV separately.

    I'm using the Audio Profiles add-on to only switch to the secondary audio HDMI when the codec is DTS.

  • Sorry for the offtopic but... have you checked with them about DTS? Because for audio they state, and I quote: "Audio passthrough — byte for byte: LPCM to 7.1, Dolby Digital, Dolby Digital Plus and TrueHD with Atmos. Lip sync adjustment."

    No mention at all of DTS formats. Considering how LG is handling stuff, I wouldn't give that for granted.

    Someone posted a screenshot of the developer's response in the same thread confirming that all DTS formats will also have passthrough enabled

  • If you have 2 hdmi outs you can use one for video directly to the TV and the other to the AVR for audio. But it is a bit of a faff as it requires switching inputs on your AVR and TV separately.

    I'm using the Audio Profiles add-on to only switch to the secondary audio HDMI when the codec is DTS.

    Hi Nissel,

    The NUC have two HDMI out. Where i can setup LibreElec to split the signal?
    One HDMI to the TV and the other HDMI to the AVR IN

    Thanks