How to install it on the actual box? It seems to have installed on the SD, since it booted to android when I popped out the SD.
![](https://forum.libreelec.tv/core/images/avatars/51/556-5134db117346aa261bd58c1b1c2fdde132c20922.png)
S802/S812-Libreelec images for 7/8/9
-
Demetris -
December 7, 2016 at 10:38 PM -
Thread is marked as Resolved.
-
-
On linux in terminal:
ssh [email protected] (x.x.x.x is ip address of your box)
password is libreelec
Now type command:
installtointernal
and answer yes on all
On Windows use Putty, login to box and type command installtointernal
-
On a dream world i would compile you a patched MXIII-PLUS board file with 10/100 so you get ethernet working.
That dream world would be nice, but I guess that's why it's called a dream world - it isn't reality
-
Just tried LibreELEC-S8X2.arm-8.2.3-M8.img
Failed again.
Armada Mach 8 s802
LAN Ethernet:10/100M
2gb / 8gb
Previous attempts link.
Kostaman, can you confirm - you used the "Enable SD card dual boot" in post #1048 to enable an SD boot and then tried to boot one of Demetris's 8.0 builds? I have a friends M8 and am trying to determine how to boot one of Demetris's 8.0 builds via SD.
-
Please someone help. After the update the libreelec logo appears in the left top corner of my screen but after that the screen is black. I use the LibreELEC-S8X2.arm-8.2.3-MXIII-PLUS.tar (I have the MXIII-G)
-
can you confirm - you used the "Enable SD card dual boot" in post #1048 to enable an SD boot and then tried to boot one of Demetris's 8.0 builds? I have a friends M8 and am trying to determine how to boot one of Demetris's 8.0 builds via SD.
Yes i did. #1,04
I've gone to stock Android on this box but the stock firmware still wont load LE with latest 8.2.3-m8
-
I just installed the 8.2.3 update (TAR) on my MXIII 1G. It works without any problems.
Just one question: I have an 200Mbps internet connection, when i run speedtest it only comes too 65Mbps.
Any reason why? Al cables and switches are 1000Mbps.
-
Thank you! Thank you!
I downloaded LibreELEC-S8X2.arm-8.2.3-MXIII-1G.tar.
Works like a charm!
I'm really happy!
-
Please someone help. After the update the libreelec logo appears in the left top corner of my screen but after that the screen is black. I use the LibreELEC-S8X2.arm-8.2.3-MXIII-PLUS.tar (I have the MXIII-G)
That sounds like the same problem that I have on the x8h-plus.
-
Hi Demetri,
i have burned your LibreELEC-S8X2.arm-8.2.3-S82.img on my Micro SD Card with the LibreELEC.USB-SD.Creator.Win32 Tool.
I take the Card in the Slot of my Orbsmart S82. I go to the Bootloader via the RESET Button in the AV Link and Power ON on same time.
Then i try apply update from EXT and there from sdcard.
With this error:
failed to mount
is there a other Methode to flash this Box with your image???
-
Guys i installed (sd) last build mxiii-1g on my mxiii-g 2gb of ram and all works. But shall I use a different build due to the amount of ram? Thank you and thanks dev for your work!
-
I have a bricked M8S running S812. Can anyone help me get LibreElec on it?
Willing to compensate you for your time.
Thanks.
-
Latest build running well on M8 S802, Thank you.
-
Please someone help. After the update the libreelec logo appears in the left top corner of my screen but after that the screen is black. I use the LibreELEC-S8X2.arm-8.2.3-MXIII-PLUS.tar (I have the MXIII-G)
Yes I get this too. I have a Tronsmart MXiii 2gb and I imaged LibreELEC-S8X2.arm-8.2.3-MXIII-PLUS.tar
First time I've run into this issue.
-
Yes I get this too. I have a Tronsmart MXiii 2gb and I imaged LibreELEC-S8X2.arm-8.2.3-MXIII-PLUS.tar
First time I've run into this issue.
Yeap because you have the MXIII and not the MXIII-G/PLUS
You should use the S82 image
-
Yeap because you have the MXIII and not the MXIII-G/PLUS
You should use the S82 image
Hmm good to know, I guess I got lucky flashing the MXIII-Plus before then. I will use the other one from now on.
-
Yeap because you have the MXIII and not the MXIII-G/PLUS
You should use the S82 image
Demetri, I have the X8H-Plus and used the LibreELEC-S8X2.arm-8.2.3-X8H-PLUS.tar image, but have the same problem.
LE logo on boot and then black screen.
-
Demetri, I have the X8H-Plus and used the LibreELEC-S8X2.arm-8.2.3-X8H-PLUS.tar image, but have the same problem.
LE logo on boot and then black screen.
you no logs, me no magic balls around=you are on your own
-