S802/S812-Libreelec images for 7/8/9

  • Sorry, but how come MXIII is not supported, when it says so in the first post?


    I will release LE9.x images for only for the two devices i own - MXIII-PLUS/MXIII-G/PROBOX2-EX-PLUS - S82/S82B/S82H/MXIII/S89/S89H and that's it.

    Now that you point that out and I read it again, I may indeed have misunderstood which platforms demetris is supporting with his 9.x releases. I was probably under the impression MXIII-only boxes (by that I mean not the PLUS or G versions or whatever other variants are out there) had been dropped because of other comments I've read somewhere in this thread.


    Maybe someone else can clarify, but In the download sections for 9.0 or 9.0.2 there are only two types of image hardware designations: "MXIII_PLUS" and "S82". I assumed that meant my MXIII wouldn't be compatible since it's an S802 (and also because it was called an "M82" in the settings section of Android when I was still running that).


    If "S82" actually means "S82/S82B/S82H/MXIII/S89/S89H" then you're right and it sounds like some MXIII boxes should probably work. Could "S82" mean what was previously referred to as "S8X2" in the image names? I'm also not clear on whether an "MXIII"-compatible image would be for the 1G or 2G ram models or both.


    I guess the quickest way might be to have a go with an "S82" image on a MXIII-only box and see if it works.Unfortunately I don't have access to my own MXIII box at the moment.

  • NicoLE

    The 9.x image S82 will work on MX-III 2GB version.

    There is no 9.x build available for the MXIII 1GB version

    Kodi 18.4 x64 Windows | LibreELEC 8.2.3 MX-III 2GB S802 by Demetris | LibreELEC 9 RR WeChip V5 S905X by 5schatten

  • I successfully flashed le 9 to my mxiii 4K box and it boots into kodi 18.2 fine but I can’t get my Ethernet to connect. Tried rebooting entire network and box and tried dhcp and static but still not connecting to any repos. I know I’m beating a dead horse but after reading 90 pages I still can’t get it to work. I’m open to any advice.

  • Hello

    I have Tv Box M8S+ from China. So I'm afraid that isn't original version:)

    Amlogic S812

    Could you please tell me which latest version should I use on my box?

    Is it "LibreELEC-S802.M8.arm-8.0.RC4.img.gz" from 25.02.2017 is this ok file?

    Or maybe "LibreELEC-S8X2.arm-8.2.3-M8.img.gz" will be newer version?

    I would be grateful for help

  • Hey there, I am looking for some help please. I have an older android box with the following specs that I want to put libreelec for my parents.


    Tronsmart mxiii 2/8 GB with a 6330 chip

    Android 4.4.2

    Build 115K4 firmware

    kernel 3.10.33

    Cpu: ARM v7 processor rev 1(v71)


    I am looking to flash the latest compatible Libreelec build to it, but cannot find it. I don't see any device trees anywhere. I do have two other 905X boxes that I have Kazaq build Kyrpton 8.2.3.1 Kodi 17.6 and I am comfortable flashing. Can someone please tell me with the correct .img (tar) files and device tree?



    Thanks you so much,