f I reboot from the power menu no add on is accessible any more. It just freezes up. Plugging out the power cable and plugging back in works fine.
Yesterday I rebooted my Minix 5-6 times and no freezes. I use 8.0.1l (with temp sensor) and Minix dtb. I don't remember when my box freezes up last.
I have Minix Neo U1 too and no freezes. Try to reinstall the build or replace the SD card.
Turn on the waiting for network under LibreELEC/Network menu in Settings.
waiting for network under LibreELEC is oldready off in my settings.
What is your hardware config ?
waiting for network under LibreELEC is oldready off in my settings.
What is your hardware config ?
Turn it on to resolve the time issue. Minix-AVR-TV
I can't play any RTSP stream (for example with Surveillance Cameras addon).
In linux with VLC all my URL's plays OK.
i try solve it hide URL's in .strm files but no effect.
( My English is bad - I know - sorry )
My hardware - nexbox a95x 2GB ram plus 8GB flash ( S905x)
SD card install with last version libreelec 8.0.2.a
( maybe it's Kodi issue not libreelec - i don't know- any help is needed)
Kszaq
Thank.
8.0.2a is perfect in m8sII.
However, compared to Android, KODI does not adjust the position of subtitles. I think it's definitely a bug.
For better KODI ~
Hi
Great job with the build, running 8.0.2 on a BeeLink mini mx-iii via USB.
The only issue I seem to have is that the remote isn't detected/working (also neither is my Logitech Harmony remote), just wondered what I need to do to resolve this?
If I plug in a USB keyboard that seems to work fine, but I wouldn't mind getting the default remote working again if possible
I am running - LibreELEC-S905.arm-8.0-8.0.2a.img.gz
device tree - gxbb_p200_2G_1Gbit.dtb
device - Beelink mini mx-iii
thanks for any pointers
Very strange but sometimes libreelec not recognize vol+ and vol- on box remote. Every other remote key is working but just no reaction for volume keys. After restart everything goes back to normal. Libreelec 8.0.2a box K8M s905x 2GB / 16GB.
Display MoreHi
Great job with the build, running 8.0.2 on a BeeLink mini mx-iii via USB.
The only issue I seem to have is that the remote isn't detected/working (also neither is my Logitech Harmony remote), just wondered what I need to do to resolve this?
If I plug in a USB keyboard that seems to work fine, but I wouldn't mind getting the default remote working again if possible
I am running - LibreELEC-S905.arm-8.0-8.0.2a.img.gz
device tree - gxbb_p200_2G_1Gbit.dtb
device - Beelink mini mx-iii
thanks for any pointers
I have a Beelink MiniIII but I use
gxbb_p200_2G_1Gbit_RealtekWiFi.dtb There is a remote thread, read this it might help [8.0.2a] LibreELEC 8.0 for S905/S905X
Kszaq
Thank.
8.0.2a is perfect in m8sII.
However, compared to Android, KODI does not adjust the position of subtitles. I think it's definitely a bug.
For better KODI ~
It works very good, but in my case, it shuts down after some time, most times over night
I have a Beelink MiniIII but I use
Codegxbb_p200_2G_1Gbit_RealtekWiFi.dtbThere is a remote thread, read this it might help [8.0.2a] LibreELEC 8.0 for S905/S905X
thanks for the info, will check this out 
I have a Mini M8s with 8.0.2 libreelec. Everytime it goes into standby after some time with no use I can't boot it up again with the remote. Not possible to connect via SSH either. I have to remove the power cord and put it back in to restart.
How can I fix this? When I was on stock android I didn't have the same issue.
Yesterday I rebooted my Minix 5-6 times and no freezes. I use 8.0.1l (with temp sensor) and Minix dtb. I don't remember when my box freezes up last.
thanks, I'll give that build a go and see if it fixes it.
The kodi-17.3-Krypton installed in my PC can play DVD iso compressed files but the KODI of 8.0.2a LE in my Nexbox S905X 2GB/8GB cannot play the same file.
Just an observation as I will either decompress the files to play in Nexbox or stream it to the Nexbox.
Both this methods worked.
thanks, I'll give that build a go and see if it fixes it.
Yesterday I rebooted my Minix 5-6 times and no freezes. I use 8.0.1l (with temp sensor) and Minix dtb. I don't remember when my box freezes up last.
thanks blakey, l build with temp sensor disabled works like a charm.
Hey guys,
firstly I want to thank kszag for all the time and effort he put into libreelec. It works very well on my mini M8S ii, however I have one question. I still have the RGB problem with my TV (old Sony). Other boxes have this aswell but they fixed it by adding an option into android:
I ran libreelec but I still encounter the bug. Should I run a command or something?
Thank you!
Is it possible to add video out through AV, instead of only HDMI, port for the next releases?
For everyone who had problems with audio sync in Krypton builds. This advancedsettings works:
XML<?xml version="1.0" encoding="UTF-8" ?> <advancedsettings> <video> <adjustrefreshrate> <override> <fps>23.976</fps> <refresh>24.0</refresh> </override> <override> <fps>25.000</fps> <refresh>50.0</refresh> </override> </adjustrefreshrate> <latency> <refresh> <rate>24</rate> <delay>0</delay> </refresh> <refresh> <rate>50</rate> <delay>-50</delay> </refresh> </latency> </video> </advancedsettings>
I used search in LE and found this as a fix for Krypton Audio/Video Sync.
I am using Krypton 8.0.2a (2017-05-28) and have noticed i have to set Audio offset Ahead By : 0.125s for Audio to be in Sync with
all my 23.979 fps movies.
I copied this XML for Krypton into Userdata and rebooted. It was a little better but obviously not right for my sync timing.
Can someone help in maybe modifying this XML to work with Audio offset Ahead By : 0.125s.
Or is my issue not fixable using advancedsettings ??
EDIT : Just ReBooted and Playback Audio/Video Sync Fixed.
I did Remove the XML File.
I have no idea what happened here.
