[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices

Enable

Quote from adamg

This is included in the image now, you just have to enable it

sorry i dont understand I have enable crazycat addon but Mce remote wont work so what to do then ?

setting it to 480cvbs by using echo 480cvbs > /sys/class/display/mode made the trick!

now i need to know if there is a way to set it to 480cvbs before the first boot so i wouldnt need to enter ssh every time i boot on

Quote from Jönke

Enable

sorry i dont understand I have enable crazycat addon but Mce remote wont work so what to do then ?

Crazycat isn't working for me either, my Xbox One DVB adapter isn't being detected with this build.

edit: Manually installing from Index of /addons/9.0/S905/arm/driver.dvb.crazycat fixes it for me.

jasonhelene

You can add this line to the autostart.sh file in the .config folder (create the file if it doesn't exist).

Then this command will be applied at boot.

Quote from The Coolest

jasonhelene

You can add this line to the autostart.sh file in the .config folder (create the file if it doesn't exist).

Then this command will be applied at boot.

Thank you so much, made my day!

Just to stick it here to the ones that may need:

nano /storage/.config/autostart.sh  


And inside 

echo 480cvbs > /sys/class/display/mode

jasonhelene

Sorry, but I don't have an answer to that, maybe one of the devs can answer.

I need to find a way to change emulationstation and retroarch resolution! now the libreelec works but those systems gives me bad image and they are the main reason im trying libreelec

Re gxm device trees, q200 is for Gigabit ethernet, q201 is for 100M Ethernet.

Hmm, my X92_3G_q201 board has Gigabit ethernet and both, "gxm_q200_3g" and "gxm_q201_3g" work OK...

Quote from Sholander

Hmm, my X92_3G_q201 board has Gigabit ethernet and both, "gxm_q200_3g" and "gxm_q201_3g" work OK...

Sholander, does wi-fi also work on Q201 device tree?

You can use gxm_q200_3g_x92.dtb with 8.90.4 to make the display work

Hello,

What are the different resolutions supported in this version. I have a 2560x1440 Asus monitor.

Thank you in advance.

Quote from nice

Hi,

I have generated a config file for my Beelink GT1 and GT1U remote. I think the ir codes are the same with the Mini MV III II. I have mapped a few keys to use it with Libreelec. Please take a look in the beelink_gt1 file.

1. systemctl stop kodi
2. systemctl stop eventlircd
3. copy the file "beelink_gt1" to "/storage/.config/rc_keymaps/" and "rc_maps.cfg" to "/storage/.config/"
4. ir-keytable -a /storage/.config/rc_maps.cfg -s rc0
5. systemctl start eventlircd
6. systemctl start kodi

Thanks. Unfortunately "No devices found" when I run command from point 4.

Did you edit the rc_maps.cfg with the name of your new remote file?

Quote from Gregoir3

Thanks. Unfortunately "No devices found" when I run command from point 4.

You can try to edit rc_maps.cfg to

meson-ir * beelink_gt1

And also use last dtb file for you device

Quote from boot2k3

Sholander, does wi-fi also work on Q201 device tree?

You can use gxm_q200_3g_x92.dtb with 8.90.4 to make the display work

Thanks, but I use ethernet on my box, did not try (yet) wi-fi...

Quote from boot2k3

You can try to edit rc_maps.cfg to

meson-ir * beelink_gt1

And also use last dtb file for you device

Tried this as well, to no avail.

Quote from adamg

You need to update your DTB

I did. Renamed it to dtb.img and rebooted.