[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices

  • Thanks for fixing HW decoding adamg


    I've just noticed that the box can no longer suspend. This was available with v1.0.8.


    Thanks again.


    I've verified that the steps to enable suspend have been performed. Namely:-


    "In 8.1.7 you can enable suspend/sleep mode manually:

    1. Go to \\Configfiles\sleep.conf.d (in Windows) or /storage/.config/sleep.conf.d (over SSH).
    2. Rename sleep.conf.sample to sleep.conf
    3. Open sleep.conf and remove this line: SuspendMode=false
    4. Reboot, enjoy."
  • I have the same issue in Amazon VOD. The System freezes.

    Thanks for confirming. As the Addon works on raybuntu's Odroid build, maybe it's related to inputstream (but on the other hand SkyGo works fine.) or adamg 1.1.10.


    Anyone tested netflix already with this build?

  • Thanks for confirming. As the Addon works on raybuntu's Odroid build, maybe it's related to inputstream (but on the other hand SkyGo works fine.) or adamg 1.1.10.


    Anyone tested netflix already with this build?

    I did and it also freezes. Will go back to 1.0.8

    Beelink MiniMXIII II 2GB, 32GB always running latest Libreelec from SD card. No issues so far(except for the ones already known or posted by me).

    Mecool m8s Pro+ which with widevine level 1, Android runs a hacked version of android TV.

  • Thanks for confirming. As the Addon works on raybuntu's Odroid build, maybe it's related to inputstream (but on the other hand SkyGo works fine.) or adamg 1.1.10.


    Anyone tested netflix already with this build?

    The binary add-ons in this build are actually taken from Raybuntus c2 repository, unfortunately I don't have a Amazon Prime to test, I will recompile all the add-ons from scratch and switch back to hosting them for the next build, they are just a pita to maintain and take 6hours to compile them all 😴 and that's why I didn't want to do it anymore

  • I install adamg latest build on sd card, when I select reboot to internal (android) but failed. I can’t go back to android?

  • Amazon VOD is working for me in the 1.1.0 version

    After upgrading Kodi got stuck in "migrating addons...", I pulled the power cable after a while. after starting the box again everything looked fine.


    Unfortunately the bug I reported earlier is still present ( GDPR-2 see sample I sent you)

    Thanks for putting so much work into this!

  • I install adamg latest build on sd card, when I select reboot to internal (android) but failed. I can’t go back to android?

    Remove the sd card.

    Samsung RU7400 Onkyo HTX22HDX Nvidia Shield HD Homerun Duo (Living Room)

    Samsung UE40ES5500 X96 Max+, Fire TV 4K Stick (Bedroom)

    Synology DS920+ Plex Pass

    :)

  • Remove the sd card.

    when I use previous adamg build, these build are working great and reboot to internal works. But in latest adamg build reboot to internal not working? I m going back to kazaq’s build.

  • when I use previous adamg build, these build are working great and reboot to internal works.

    These builds are all Alpha, the best way is two sd cards. One backup and one to play

    Beelink Mini MXIII S905-CPU 2.0GHz, Mali 450, 2GB Ram, 16GB eMMC (Android 6.0} | SD-A: 16GB microSD (LibreELEC [kszaq] - Kodi 17) | SD-B: 16GB microSD (CoreELEC [adamg] - Kodi 18)

    Raspberry Pi 3 - 64GB microSD (LibreELEC - Kodi 17)

    NUC NUC6CAYH - 64GB SSD (LibreELEC - Kodi 17) | 16GB microSD (LibreELEC [Milhouse] - Kodi 18)

  • Hi folks, new to Libreelec and Kodi - it's blowing my mind.

    Thanks to all the folks who contribute.


    I've recently upgraded to Libreelec 9 (in this post) from 8.2 only to find the official Plex app (0.1.3) no longer works.

    Most recently upgraded and and did system reset to make sure there wasn't an issue with configs mismatches. same issue.

    The symptom is:

    clean rebuild of librelec - add plex video addon via Kodi Repo

    Plex starts - I authenticate (via the plex.tv/link), login locally (select username and enter PIN) - then it hangs.

    I'm able to disconnect from the app gracefully and return to kodi no problem.


    Any assistance is greatly appreciated.

    debug log attached.

    kodi.zip

  • As an FYI - three different usb ATSC tuners are not working with 1.10 on a Mecool M8S Pro+

    All work fine downgrading back to 1.08.


    Tvheadend reports :


    Code
    2017-12-19 15:09:46.247 linuxdvb: Auvitek AU8522 QAM/8VSB Frontend #0 : ATSC-T #0 - DTV_CLEAR failed [e=Inappropriate ioctl for device]

    Perhaps the binary addons are not compatible - I will test with the new addon builds when posted.

  • I install adamg latest build on sd card, when I select reboot to internal (android) but failed. I can’t go back to android?

    I will look into this


    I did say at the bottom of one of my previous posts that crazycat and dvb support was not in this release, it will be added in the next one.


    This will be fixed in the next release

  • Hi, new release works fine , very fast boot now, but i have some strange behaviour using iptv.

    I have some distortion of audio, and finally closing the stream.


    03:10:18.265 T:4096053264 NOTICE: Display resolution ADJUST : 1920x1080 @ 50.00 - Full Screen (26) (w**ht: 0.000)

    03:10:18.775 T:4071293840 WARNING: ActiveAE - large audio sync error: -89447.900397

    03:10:22.870 T:4071293840 WARNING: ActiveAE - large audio sync error: -89325.506343


    In others try i have more large audio sync error.


    Any tip? thx!

  • DVB support is not supported in this build due to the fact that media_build is no more but it is supported in builds by afl1, support should be readded in the next release (hopefully).

    Does that mean we, KII Pro users, should wait for the next release?

  • Great job, thanks!

    Unfortunately, my remote control receiver: Genuine-SMK-Media-Center-USB-RC6-IR-Infrared-Remote-Receiver

    does not work with your release.

    I use the IR receiver for my Harmony 700 so that all buttons work in Kodi.

    In kszaq release it works without problems.


    Please, can you do something there?

    Mecool M8S Pro+

    Philips 37PFL8404H

    Edited once, last by Harmonia ().