- Official Post
Thank you all.
[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices
-
GDPR-2 -
October 20, 2017 at 4:01 PM -
Closed -
Thread is Unresolved
-
-
Hello, I'm trying to use Libreelec 9 on my device (s905, 1gb ram, Gigabit ethernet) because the support to Netflix addon.
But the actual build 1.0.4.1 not work on my device, only works the Kszaq builds with "temp_sensor_disabled".
Are there plans in the future for develop similar "temp_sensor_disabled" builds for Libreelec 9.x?
-
- Official Post
LE 9.0 does not exist. Development builds exist. Lots will change between now and LE 9.0 .. much depends on our community builders submitting their work to our main code repo instead of hoarding a boatload of patches. That said, don't expect miracles on Amlogic devices until we move up to a mainline kernel.
-
Ok chewitt, thanks for the explanations.
-
Can I downgrade back to 8.2.0.1 through the update folder?
-
Sorry, to hear about your back Adamg, hope it heals soon.
-
love your build , in kazaq builds you cannot change resolution on 8.2 and up unlike yours ... cheers and thanks again ... thanks goes to kazaq for all his great work tho appreciate it just that one feature i do miss on his builds u still have
-
hi.adamg.
when I plug my tbs 5520 se in tvbox,Libreelec recognize it,but there is an error ,here is dmesg
Code
Display More[ 0.263313@0] usbcore: registered new interface driver usbfs [ 0.263381@0] usbcore: registered new interface driver hub [ 0.263462@0] usbcore: registered new device driver usb [ 0.343613@0] usbcore: registered new interface driver smsc95xx [ 0.344092@0] usbcore: registered new interface driver usb-storage [ 0.344245@0] usbcore: registered new interface driver usbserial [ 0.344306@0] usbcore: registered new interface driver usbserial_generic [ 0.344368@0] usbserial: USB Serial support registered for generic [ 0.344427@0] usbcore: registered new interface driver pl2303 [ 0.344484@0] usbserial: USB Serial support registered for pl2303 [ 0.347525@0] usbcore: registered new interface driver usbhid [ 0.347536@0] usbhid: USB HID core driver [ 5.075950@2] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0 [ 5.591518@1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.591525@1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.591530@1] usb usb1: Product: DWC OTG Controller [ 5.591536@1] usb usb1: Manufacturer: Linux 3.14.29 dwc_otg_hcd [ 5.591541@1] usb usb1: SerialNumber: dwc2_b [ 5.592241@3] dwc_otg: usb0: type: 1 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0 [ 5.616434@3] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.616441@3] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.616446@3] usb usb2: Product: DWC OTG Controller [ 5.616452@3] usb usb2: Manufacturer: Linux 3.14.29 dwc_otg_hcd [ 5.616457@3] usb usb2: SerialNumber: dwc2_a [ 5.988155@1] usb 2-1: new high-speed USB device number 2 using dwc_otg [ 6.188273@0] usb 2-1: New USB device found, idVendor=734c, idProduct=5521 [ 6.188285@0] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 10.029636@0] dvb-usb: found a 'TBS 5520se USB2.0' in cold state, will try to load a firmware [ 10.029849@0] usb 2-1: Direct firmware load failed with error -2 [ 10.029855@0] usb 2-1: Falling back to user helper [ 70.270657@2] dvb-usb: did not find the firmware file. (dvb-usb-tbsqbox-id5521.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2) [ 70.271174@2] usbcore: registered new interface driver tbs5520seI copy the file dvb-usb-tbsqbox-id5521.fw to /lib/firmware,Libreelec success load the driver,but once I reboot Libreelec,the firmware is disappear.What should I do?
You can't add additional fw. New firmware have to be added at building image. In my next build I'll include this firmware. I also created PR in LibreELEC to add this fw to all builds.
-
Sorry I haven't been around much but I will get around to answering every bodies questions in due time, I have been quite unwell the past week, I slipped a disc in my spine and have had a lot of pain as a result of sciatica. I'm catching up on changes in the master LE repo and bringing this builds repo forward to track it. I am also moving next Tuesday so life is slightly hectic at present.
I have two slipped discs so I can understand your pain and your situation...I hope you'll solve it soon.
As I wrote some posts before, it was all about 3 (yes, 3!!!) microSD that works with 8.x but DON'T with 9.x!
The only one that works with 9.x is an old 2gb from Sandisk...! -
You can't add additional fw. New firmware have to be added at building image. In my next build I'll include this firmware. I also created PR in LibreELEC to add this fw to all builds.
Thanks, included into my latest build.
I have two slipped discs so I can understand your pain and your situation...I hope you'll solve it soon.
As I wrote some posts before, it was all about 3 (yes, 3!!!) microSD that works with 8.x but DON'T with 9.x!
The only one that works with 9.x is an old 2gb from Sandisk...!Thanks =) glad to see you got it working in the end, you should install to the nand though, it's much better.
New version is out, 1.0.5, just do the usual reboot to trigger the update notification and reboot again once it has downloaded for it to be applied.
ChangesCode
Display Morelibreelec: latest changes pulled in from master branch binary_addons: updated to latest revisions (mainly emulation and tvheadend) openssh: enabled by default emulation: fixes to a number of addons (credit: @CGarces) kudos to @afl1 for the following updates... kodi: updated amlogic patches media_build: reverted to kszaq 8.2 version for dvb support tvheadend: updated to 4.3-628 webgrabplus: updated to v2.1.5 dvb-firmware: added missing firmware for dvb-usb-tbsqbox-id5521 kodi: enabled allow unknown addons by default -
Since last update to 1.0.5. When starting a particular video file.
At the start of playing video
Error: CDVDAudio::AddPacketsRenderer - timeout adding data to renderer
Followed by multiple lines
Warning: ActiveAE - large audio sync error: [lots of numbers]
Log is enormous.
It's a 720p H264 file, 2.0 mp3 audio using Amcodec hardware decoding.
Only occurs with this type of encoded file according to above specs.
-
Display More
Since last update to 1.0.5. When starting a particular video file.
At the start of playing video
Error: CDVDAudio::AddPacketsRenderer - timeout adding data to renderer
Followed by multiple lines
Warning: ActiveAE - large audio sync error: [lots of numbers]
Log is enormous.
It's a 720p H264 file, 2.0 mp3 audio using Amcodec hardware decoding.
Only occurs with this type of encoded file according to above specs.
Your report is for nothing without log and sample. BTW who is using mp3 for h264 video dabbing ? He muss be really dilettante.
-
Your report is for nothing without log and sample. BTW who is using mp3 for h264 video dabbing ? He muss be really dilettante.
I can't be helped then.
Thanks for your reply.
-
I can't be helped then.
Thanks for your reply.
Can you upload a sample of the video?
-
I'm on 1.0.5 (I think this holds also for afl1 8.90 build) and Kodi crashes when I do the following:
Play LiveTV via TVHeadend, open a video addon like Youtube and play a random video. Screen gets black, box freezes, kodi restarts after about 2 minutes.
Crash logs via PM.
-
I'm on 1.0.5 (I think this holds also for afl1 8.90 build) and Kodi crashes when I do the following:
Play LiveTV via TVHeadend, open a video addon like Youtube and play a random video. Screen gets black, box freezes, kodi restarts after about 2 minutes.
Crash logs via PM.
I know about this issue. It is common for hw decoded video (AMLCodec). You have to stop playback and then you can start new one.
-
Can you upload a sample of the video?
I really don't know how to do this.
