Hi. Just put .tar file to .update directory with new .dtb for wp2 . I will upload my remote config when I will finish it because now some buttons does not work.
Regards
[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices
-
GDPR-2 -
October 20, 2017 at 4:01 PM -
Closed -
Thread is Unresolved
-
-
location of update directory in wp2 via filezilla plz?
-
2re Did you find a solution for the no adapters?
No.
-
Hi. Just put .tar file to .update directory with new .dtb for wp2 . I will upload my remote config when I will finish it because now some buttons does not work.
Regards
What about fresh Install ? its working on WP2 and TVH status ?
-
I did fresh installation and live tv works great with this updated build and tvh
-
Thanks GDPR-2 and all developers for the great work you do! I installed version 8.90.4 on a MXQ pro. WLAN works fine, but on the wired ethernet (eth0) desn't get the correct IP address, only an APIPA address (169.254.x.x/16). I have used gxbb_p200_1G_1Gbit_RealtekWiFi.dtb Version 8.90.3 worked fine.
-
Hi there, First fo all, thank you for your hard work!!!
I have a S905X box, and I wonder if support of wake on lan is possible!?
when i do:
Codeethtool eth0I get this result:
CodeSupports Wake-on: ug Wake-on: dbut when i tried to setup "g" feature to enable wake on lan, i have this in result:
CodeCannot set new wake-on-lan settings: Operation not supported not setting wolany ideas? Thanks in advance.
-
GDPR-2 , I think something wrong is with playing 4k channels on new build. When I open 4k channel on hotbird 13e and back to sd or hd channel my screen starts to blinking and disconnecting. Sometimes it happens when I just open 4k channel . I have access to Hotbird 4k1 and Fasion 4k (both FTA from hotbird 13e). On older build both works good with tvheadend 4.2
-
The volume is cut off in the channels change in dolby.
-
Thanks GDPR-2 and all developers for the great work you do! I installed version 8.90.4 on a MXQ pro. WLAN works fine, but on the wired ethernet (eth0) desn't get the correct IP address, only an APIPA address (169.254.x.x/16). I have used gxbb_p200_1G_1Gbit_RealtekWiFi.dtb Version 8.90.3 worked fine.
I reported a similar issue here with my T95Z Plus device. ZRas suggested setting the device to 100M, and it worked for me.
ethtool -s eth0 speed 100 duplex full
-
The volume is cut off in the channels change in dolby.
Yes, I have the same problem.
I thought it's my avr, but not, the same problem on different avr too.
GDPR-2 is it possible to collect some logs for this issue? Or is it a question to kodi team?
The sound becomes quieter and and quieter after some time
-
Trying to install Webgrab+Plus. Loading Mono first - but doesn't complete the install as it is waiting for "os.libreelec" to be installed first. Downloads Mono fully but then hangs on 1% download of dependencies. This lingering missing os.libreelec bug has some nasty knock on's.
Anyone got any ideas how to work around this ?
Shoog
-
Thanks a lot, but it didn't work for me
It seems the wrong driver is loaded with wrong advertisement speed (1000 full duplex is missing) -
Thanks a lot, but it didn't work for me
It seems the wrong driver is loaded with wrong advertisement speed (1000 full duplex is missing)Reverted to 8.90.3 and with MXQ pro device tree. Wired ethernet is now working, still at 100mbit (specs says 1Gbit) Another driver is loaded, st_mac100 instead of s
t_gmac
-
With this release (not sure if just 8,90.4), 3D files are being reported as 1080p. Earlier releases correctly identified the files as 3D.
Is there any solution to this?
-
Trying to install Webgrab+Plus. Loading Mono first - but doesn't complete the install as it is waiting for "os.libreelec" to be installed first. Downloads Mono fully but then hangs on 1% download of dependencies. This lingering missing os.libreelec bug has some nasty knock on's.
Anyone got any ideas how to work around this ?
Shoog
You have to install Mono manually.
Download from LE repository http://libreelec.adamg.co.uk/addons/9.0.1/S…o-9.0.1.110.zip
Open it in winrar.
In windows explorer open \\libreelec\Addons.
From winrar drag tools.mono and drop it to explorer.
Reboot box.
-
With this release (not sure if just 8,90.4), 3D files are being reported as 1080p. Earlier releases correctly identified the files as 3D.
Is there any solution to this?
NO LOG - NO HELP.
My box has no issue in LE 8.90.4 with 3D files.
