Posts by zbigzbig20

Hi. 2 Years ago I replaced my dreambox 8000hd with wetek play 2 (amlogic s905 with dvb-s single tuner) . For multimedia wetek is ok using android (weos), libreelec, coreelec ... But for live tv is very very average. Dvb-s tuner is very weak and very often I have problem with few channels on hotbird 13e . Few weeks ago I bought dreambox 920uhd with dual dvb-s2x fbc tuner. There all channels works perfect on this same sat configuration . Now I streaming channels from dreambox to my android box using vu+ pvr backend on coreelec . Live tv works perfect, stable (also recording on dreambox hdd). About built-in tuner in K series I do not know. Maybe are better than wetek

CvH, currently it is not that bad even with older kernel. I think it works even better than all RPIs with mainline kernel.

Now is time for bindou to show his coding skills Life goes on and CoreElec project is still alive and well !

Cya

Rizwan , Coreelec works great on WP2 ,internal dvb driver also. After fresh install all dtb files you have in device trees directory on sd card. Copy your, rename to dtb.img and overwrite on sdcard where is default dtb.img file

Ken82 , yes of course

GDPR-2 , was first

afl1 , log after reboot with enabled crazycat driver :

17p6

afl1 , strange but I have no free adapters on this 3 drivers (le / crazycat / hauppauge). Dmesg for crazycat driver:

LibreELEC:~ # dmesg | grep wetek
[   [email protected]] wetek-dvb dvb.49: Found Wetek i2c-1 adapter ...
[   [email protected]] wetek-dvb dvb.49: ts0: parallel
[   [email protected]] wetek-dvb dvb.49: dmx rst ctl = ffffffc05fd77c00
[   [email protected]] wetek-dvb dvb.49: asyncfifo rst ctl = ffffffc05fd77c80
[   [email protected]] wetek-dvb dvb.49: ahbarb0 rst ctl = ffffffc05fd77d00
[   [email protected]] wetek-dvb dvb.49: uparsertop rst ctl = ffffffc05fd77d80
[   [email protected]] wetek-dvb dvb.49: Wetek NIM(s) detection in progress ...
[   [email protected]] wetek-dvb dvb.49: Checking for Sony CXD2841ER DVB-C/T/T2 demod ...
[   [email protected]] i2c i2c-1: wetekplay: i2c wr failed=-11 addr=6c reg=00 len=1
[   [email protected]] i2c i2c-1: wetekplay: i2c wr failed=-11 addr=6e reg=00 len=1
[   [email protected]] wetek-dvb dvb.49: Checking for Panasonic MN88436 ATSC demod ...
[   [email protected]] wetek-dvb dvb.49: Checking for AVL6211 DVB-S/S2 demod ...
[   [email protected]] wetek-dvb dvb.49: Total Wetek NIM(s) found: 1
[   [email protected]] wetekdvb: module license 'Proprietary' taints kernel.
[   [email protected]] wetekdvb: Unknown symbol tsdemux_set_ops (err 0)

pepeq , I don't know why I can't. I even did clean installation

GDPR-2 , on prevous builds with prevous kernel this command ir-ctl -t 35000 works nice. Now again my remote works strange

GDPR-2 , with this new builds we have to again install older crazycat driver (wetek play 2) because with this built-in again there is no connection with tvheadend . And I can't adjust delay using this command ir-ctl -t 35000 . There is info :

/dev/lirc0: device does not support setting timeout . Because of that my remote does not work nice now

GDPR-2 , in 2 latest devel builds when I trying to set delay time for my remote by ssh using this command :

ir-ctl -t 33000

I getting this message /dev/lirc0: device does not support setting timeout

My remote works little bit worst now on latest dev builds. Something changed again with remote?

For wetek play 2 there is also android tv rom with working netflix in 1080p/4k

GDPR-2 , we need new dtb for this new devel? Because on this build again there is no connection with tvheadend on wetek play 2 ? Or maybe again we need updated crazycat / hauppauge drivers for older kernel?

2re , on my wetek play 2 live tv on latest devel build works very good with enabled or disabled deinterlacing . Amcodec is always enabled for all source types, framerate is set on 50Hz and also disabled noise reduction . Check on your slowmotion channels what video decoder it uses HW or SW?

1 april

Never change running system

For me everything works nice on latest GDPR-2 build and wp2

crazyturk , would be nice to replace wp2 for other nice android box but with dual dvb-s2 tuner and libreelec support. But there is still nothing interesting in the stores

Thanks for everything GDPR-1

I do not know what is wrong with your box but I do not have any problems with latest test build and I can download/install everything from libreelec repo