WP2 is the same. He doesn't know tuner.
Posts by crazyturk
-
-
I can't install any PVR plug-ins.
-
Does this release support the WP2 box? Tuner does not appear.
-
Hotbird 13E
With Tvh 4.3 there is no sound on the MyZenTv 4K channel. With Tvh 4.2 there is sound on the MyZenTv 4K channel.
I use Denon AVR .It also works with Tvh 4.3 when I connect it directly to the Tv. Sometimes the sound is cut of.
-
Thanks CvH yes, RPI4 works in WP2.
-
I couldn't run it on CoreElec 9.1.I installed the generic version.installation is missing WP2
-
-
LibreELEC-AMLGX.arm-9.80-devel-20190713143004-893dd58-s905.img.gz
WetekPlay2 test
Boot ok
Lan ok
wireless ok
IpTv ok
4K vp9 no
4K vp9 3840x1440 ok
4K ff-hevc_v4ı2m2m ok
Tvh and Pvr ok
DVB Tuner no
Resetting in 4K video playback.
Dolby audio no
-
CvH Will TVH updates come?
-
WP2 "dts" is misspelled in the uEnv.ini file.It was booted when it was fixed to "dtb".Tuner drivers are not installed.
-
-
/storage$ dmesg | grep dvb
[ 10.170534] dvb_meson c1108c40.dvb: Found i2c-0 adapter: Meson I2C adapter
[ 10.170544] dvb_meson c1108c40.dvb: ts0: parallel
[ 10.170715] dvb_meson c1108c40.dvb: ts0_control: 0x0
[ 10.170870] dvb_meson c1108c40.dvb: dev_name=wetek-dvb
[ 11.411241] dvb_meson c1108c40.dvb: DVB demod detection for i2c-0 (Meson I2C adapter)...
[ 12.637920] dvb_meson c1108c40.dvb: Checking for AVL6211 DVB-S/S2 demod ...
[ 12.638316] dvb_meson c1108c40.dvb: Total DVB modules found: 0
[ 12.654721] dvbdev: DVB: registering new adapter (dvb_meson)
[ 12.658149] dvb_meson c1108c40.dvb: DVB: registering adapter 0 frontend 0 (Availink AVL6211+AV2011 DVB-S/S2)...
[ 43.394808] i2c i2c-0: Direct firmware load for dvb-fe-avl6211.fw failed with error -2
[ 43.394862] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 0...0, frontend: 950000000...2150000000
[ 43.394871] dvb_meson c1108c40.dvb: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
[ 43.394880] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 0...0, frontend: 950000000...2150000000
[ 43.511791] i2c i2c-0: Direct firmware load for dvb-fe-avl6211.fw failed with error -2
modprobe
/storage$ modprobe wetekdvb
/storage$ dmesg | grep dvb
[ 10.170534] dvb_meson c1108c40.dvb: Found i2c-0 adapter: Meson I2C adapter
[ 10.170544] dvb_meson c1108c40.dvb: ts0: parallel
[ 10.170715] dvb_meson c1108c40.dvb: ts0_control: 0x0
[ 10.170870] dvb_meson c1108c40.dvb: dev_name=wetek-dvb
[ 11.411241] dvb_meson c1108c40.dvb: DVB demod detection for i2c-0 (Meson I2C adapter)...
[ 12.637920] dvb_meson c1108c40.dvb: Checking for AVL6211 DVB-S/S2 demod ...
[ 12.638316] dvb_meson c1108c40.dvb: Total DVB modules found: 0
[ 12.654721] dvbdev: DVB: registering new adapter (dvb_meson)
[ 12.658149] dvb_meson c1108c40.dvb: DVB: registering adapter 0 frontend 0 (Availink AVL6211+AV2011 DVB-S/S2)...
[ 43.394808] i2c i2c-0: Direct firmware load for dvb-fe-avl6211.fw failed with error -2
[ 43.394862] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 0...0, frontend: 950000000...2150000000
[ 43.394871] dvb_meson c1108c40.dvb: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
[ 43.394880] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 0...0, frontend: 950000000...2150000000
[ 43.511791] i2c i2c-0: Direct firmware load for dvb-fe-avl6211.fw failed with error -2
[ 2343.803806] dvbdev: DVB: registering new adapter (dvb_meson)
[ 2343.805159] dvb_meson c1108c40.dvb: DVB: registering adapter 1 frontend 0 (Availink AVL6211+AV2011 DVB-S/S2)...
[ 2344.013048] i2c i2c-0: Direct firmware load for dvb-fe-avl6211.fw failed with error -2
[ 2344.013099] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 0...0, frontend: 950000000...2150000000
[ 2344.013106] dvb_meson c1108c40.dvb: DVB: adapter 1 frontend 0 frequency 0 out of range (950000..2150000)
[ 2344.013116] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 0...0, frontend: 950000000...2150000000
[ 2409.019148] i2c i2c-0: Direct firmware load for dvb-fe-avl6211.fw failed with error -2
-
LibreELEC-AMLGX.arm-9.1-devel-20190530122156-a41fdf1-box.img
meson-gxbb-wetek-play2.dtb
WP2 install ok
remote ok
WP2 wifi 2.4 - 5 ghz and lan ok
vp9 1920x1080p video play ok
Tvh and Pvr ok
Tuner ok
Channel scan no
Live Tv no
audio 44100 fsb no
audio 48000 fsb ok
Live Tv recording TRT 4K-TRT 4K2019-06-0222-53.ts no video play
-
Wp2 meets TVH and PVR,but the TVH does not scan the channel.
-
Wetek Plar2 support has ended.
-
Hi, belaid38
I could not run tvh and pvr at WP2. What are the tvh and pvr versions?
my pvr 4.4.7.2 and tvh 9.1.117 (4.2.7-34)
-
LibreELEC-AMLGX.aarch64-9.1-devel-20190515175720-a41fdf1-box.img.gz .The WP2 tuner driver is running but Tvh and Pvr can't meet.
-
