[8.2.3.1] LibreELEC 8.2 for S905/S905X

  • I have now installed 8.1.8 for both .tar and .img and can not find wired network

    What Device Tree did you use ?

    You Haven't mentioned Device Tree at all in your install information.

  • Strange, I also have Denon AVR (X3100W) and no issue with DTS-HD HRA, latest firmware (updated 2 months ago).

    Apparently several models (I have an X1200W) use a specific chipset that is problematic while others work. See the kodi discussion thread.

    Wetek Hub: LibreElec 8.2.3.1 (Philips 42PFL8404)
    MK808B+: LibreElec 7.0.2.7 (Samsung UE55H6270)
    OTT MXQ Pro 4k (S905): LibreElec 7.0.3.12k (Denon X1200W, 7.1, LG PF1500G)
    AKASO HM8 (S905X): CoreElec 9.0 dev build, Acer Revo 3610: Milhouse test

  • @kszaq, thanks for providing this package.


    Relase 2.1.6 runs fine so far on my new Beelink MiniMXIII II.


    But yesterday I noticed an issue:

    I plugged in my Sony Wireless Headset 2.0 and got only audio out of the left channel. The same issue has been posted a while ago here, but I could not find a solution yet.


    Do you have a clue?

  • nie było mnie trochę, potrzebuje oprogramowania pod mój 905X, jakieś namiary, proszę

    Please use English. Everything you need is in the first post.


    But yesterday I noticed an issue:

    I plugged in my Sony Wireless Headset 2.0 and got only audio out of the left channel. The same issue has been posted a while ago here, but I could not find a solution yet.


    Do you have a clue?

    No, I don't because nobody created a bug report.

  • The autorepeat patch caused issues with some remotes (unwanted repeats), I had to revert it.

  • The autorepeat patch caused issues with some remotes (unwanted repeats), I had to revert it.

    Greetings,


    Well, is there anything I can do personally?

    Thanks in advance.


    Best regards...

  • Hi kszaq,


    On S905X the max CPU frequency ist still 1200 Mhz, can it be this patch?


    Because on S905X it's 1512 and not 1536 like on S905.


    Temperature is not an issue below 40 °C.

  • The autorepeat patch caused issues with some remotes (unwanted repeats), I had to revert it.

    kszaq , could you please make this functionality optional (through config file or something, like you done it for suspend)? A huge bunch of cheap RF-remotes becomes much more handy with it. To be honest, i'm really surprised that somebody faced the problem with unwanted repeates, because i've tested 8.1.7 at all my boxes (A95X, K1 Plus, K2 Pro, Coowell V5) with their IR-remotes (except Coowell - it doesn't have one), with four different RF-remotes (1, 2, 3, 4) and with some gamepads (USB and Bluetooth) - all this stuff works just fine. Also i've looked in keystroke event handling mechanism and just can't imaging how unwanted repeats may occure :(

    Edited once, last by vevs ().

  • kszaq , could you please make this functionality optional (through config file or something, like you done it for suspend)? A huge bunch of cheap RF-remotes becomes much more handy with it. To be honest, i'm really surprised that somebody faced the problem with unwanted repeates, because i've tested 8.1.7 at all my boxes (A95X, K1 Plus, K2 Pro, Coowell V5) with their IR-remotes (except Coowell - it doesn't have one), with four different RF-remotes (1, 2, 3, 4) and with some gamepads (USB and Bluetooth) - all this stuff works just fine. Also i've looked in keystroke event handling mechanism and just can't imaging how unwanted repeats may occure :(

    Greetings,


    I agree.


    Best regards...

  • I am a noob and am ordering the Mecool M8S Pro Plus, I would like to run it with LibreElec, but the instructions to do so seem very daunting to me. Can a Noob do it by following step by step instructions or will I be in over my head?

  • What Device Tree did you use ?

    You Haven't mentioned Device Tree at all in your install information.

    I used the device tree


    gxl_p231_2g_dvb.dtb


    which I believe is correct for my box Mecool KI pro that has S905D, but I also tried with gxl_p230_k1_pro.dtb and gxbb_p201_2G.dtb in LE 8.1.7 and LE 8.1.8 and did not find the wired network, only found wireless network


    One more detail, the first time I installed connected on a 10/100 Mbits router, then I connected to another Gigabit router and reinstalled again and still did not find the wired network


    Ubuntu Pastebin

    Edited 3 times, last by atrsantos ().

  • To be honest, i'm really surprised that somebody faced the problem with unwanted repeates, because i've tested 8.1.7 at all my boxes (A95X, K1 Plus, K2 Pro, Coowell V5) with their IR-remotes

    I was the one with the problem with a HID Xiaomi Bluetooth remote - all sorts of unwanted repeats and strange stuff was occurring due to the HID patch.

    Quality BT remotes like that one already have fast enough repeat keystrokes, turbo charging such activity really caused issues.

    Revert the HID Kernel patch and the problems disappeared.

  • For KI Pro you should use "gxl_p230_k1_pro.dtb". Why do you post Kodi log if this is a hardware issue?

  • kszaq, could you please make this functionality optional (through config file or something, like you done it for suspend)?

    This is a kernel-level thing, I have no skills (yet) to make it configurable.

  • Hello!

    I have nfs mount like this:

    Code
    1. 192.168.1.254:/tmp/mnt/WD-MPU/export/HOME /tmp/g nfs ro,sync,noexec,relatime,vers=3,rsize=524288,wsize=524288,namlen=255,acregmin=0,acregmax=0,acdirmin=0,acdirmax=0,hard,noac,proto=tcp,port=2049,timeo=70,retrans=3,sec=sys,local_lock=none,addr=192.168.1.254 0 0

    Files under the the /tmp/g are vissible like this:

    But when I add a video source like this:

    Code
    1. <source>
    2. <name>g</name>
    3. <path pathversion="1">/tmp/g/</path>
    4. <allowsharing>true</allowsharing>
    5. </source>


    all my videos (.avi, .mkv etc) kodi sees as a directories and when I press OK on remote it tries to "cd" in them:


    Mounting by smb works well.



    PS. I have Nexbox A95X 1/8 and LibreElec 8.1.8

    WiFi connection.



    PPS. It is quite possible that unfsd (user space nfs daemon) running on my NAS is quite buggy, but my other boxes (sat receivers and bd-player) see my nas pretty well.


    Thanks.

    Edited 3 times, last by rx5670 ().