[8.2.3.1] LibreELEC 8.2 for S905/S905X

Quote from mega-samu

That you have mini mx? I have the mini mx 1/8 with ap6210 and it works

I have a Beelink Mini MX Version 1.0 2G/16G with AP6212 wifi chip. (Beelink Mini MX Ver 1.0 TV Box Android 5.1 2G/16G Amlogic S905)

Wifi doesn't work with firmware 8.1.6. It does work with previous firmware versions.

Hello,

In 8.1.5 and 8.1.6 I see that SMB is not working good, I can't see any share.

In 8.1.3 everything worked fine.

I use Mini M8S II.

Attached log files

log-2017-08-28-14.35.22 - only SMB

Second one all.

Hi,

I know, HDR is NOT supported, but maybe someone could give me a hint, which box does HDR-output? No success here on wetek hub...

On k1pro (amlogic s905d) hdr should work

On my Beelink MiniMXIII II (S905X) HDR works.

Would this unit work with the Libreelec firmware with Device tree gxl_p212_3g.dtb?

Quote from Nofan Tasi

following sys ctl disable ipv6 knobs exist

Code

LibreELEC:~ # sysctl -a | grep disable_ipv6
net.ipv6.conf.all.disable_ipv6 = 0
net.ipv6.conf.default.disable_ipv6 = 0
net.ipv6.conf.eth0.disable_ipv6 = 0
net.ipv6.conf.lo.disable_ipv6 = 0
net.ipv6.conf.wlan0.disable_ipv6 = 0

perhaps you can try

Code

LibreELEC:~ # echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6

and similar for the other ones.

Just curious: why would you like to disable it?

Thanks, I'm having issues with Live TV in HD channels and I was reading and Ipv6 of my ISO may have influence on it.

Just want to give it a try.

Quote from Poida

@DATS2LS

Have you tried the temp sensor disabled build?

They are the only builds I install. I have 3 S905x running 8.1.4, and 2 s905 boxes running 8.1.4 this is the only box that has done this.

I think it needs a fresh install (or new installtointernal) just need to know when u run install to internal, because my current sd card Build doesn't work with the remote, will it overwrite the current internal Nand dtb.img and put on a version that is on the sd card. Or will it see the internal nand dtb.img and use that one) that does work with my remote, but for some reason isn't booting.

Just running off sd card for time being, (my remote doesn't work, but the hdmi cec works so I can use my tv remote for most functions.

Quote from kszaq

Put tar/img.gz and device tree in update folder.

I have a S905X 2GB/16GB box, I put the following files into my update folder:-

gxl_p212_2g.dtb, renamed to dtb.img

LibreELEC-S905.arm-8.2-8.1.5.img.gz

Rebooted box, appeared to go through update process lines of information posted top left of screen, then hung on Amlogic cat picture logo.

Any pointers to what I did wrong any help appreciated?

I did not have a lot to rebuild as I have just started using LibreELEC, so I used the SDCard creater with 'LibreELEC-S905.arm-8.2-8.1.5.img.gz' file to produce a new LibreELEC SDCard and box rebooted without any problem.

Quote from Jeffers

gxl_p212_2g.dtb, renamed to dtb.img

Don't rename the dtb file.

Quote from Jaaxx

Don't rename the dtb file.

Thanks for response, thought I read somewhere that you had to rename the dtb file, probably in a different context.

I'll try this out on next update.

Sorry for my annoying question but did you include in that build the option of the "suspend" mode ?

Well answered my own question.

If when running your sd card build your remote doesn't work, and you type installtointernal to try and fix your internal install... Yeah the remote won't work... Bugger.