[8.2.2.3] LibreELEC 8.2 for S912

Quote from bullrin

using 8.2.5 i can't find a sleep.conf.sample in any folder of my x86 version. is there another way to enable hibernate mode?

edit: oh looks like the wrong thread for this question

is this really the solution to power down the device right from LE?

Is this bringing the device in the same wakeup modus as when you boot to internal (Android) first and then shut off with the red button on the original remote?

This is the way I power down now and I am looking so long for a proper solution to power off right from LE.

I am using Wrxtasy's 8.2.4-subtitles-ff and have a H96 Pro+

Update

Ik tried workaround from Kszaq above.

But it does not have any effect on powering off from LE.

If you power off you can't boot anymore with the remote and need to off/on powersupply.

When I Winscp to the sleep.conf.d folder again after reboot even a new sleep.conf.sample file has been created together with the modified sleep.conf file

How do I get this standby modus without needing to boot to Android and power off from there

Quote from Pinki

tenis, here is my autostart.sh for speed and quality hdr

Code

#color
echo '444,10bit' > /sys/class/amhdmitx/amhdmitx0/attr

#noise reduction off
echo 0 > /sys/module/di/parameters/nr2_en

#cpu speedup
echo 20 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold
echo 50000 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
echo 2 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_down_factor

#gpu speedup
echo 2 > /sys/class/mpgpu/scale_mode

Display More

for me its forcing 1512Mhz cpu clock ->

Code

echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo performance > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor

i have a question. Do you put the last code with 1512mhz cpu clock simply under the first code? Or have I to delete the #cpuspeedup codes in the first code and put the second codes there?

Quote from johnberg

is this really the solution to power down the device right from LE?

Is this bringing the device in the same wakeup modus as when you boot to internal (Android) first and then shut off with the red button on the original remote?

This is the way I power down now and I am looking so long for a proper solution to power off right from LE.

I am using Wrxtasy's 8.2.4-subtitles-ff and have a H96 Pro+

Update

Ik tried workaround from Kszaq above.

But it does not have any effect on powering off from LE.

If you power off you can't boot anymore with the remote and need to off/on powersupply.

When I Winscp to the sleep.conf.d folder again after reboot even a new sleep.conf.sample file has been created together with the modified sleep.conf file

How do I get this standby modus without needing to boot to Android and power off from there

Display More

johnberg

Read this thread, beginning around page 6. Maybe you find the fixed u-boot for your device here.

Quote from yetithebouncer

A big thanks to you all !! I was a newbe regarding libreelec and kodi. But the Beelink GT1 Ultimate did not work on android (7.1) with Kodi, audio passtrough did not work (no DTS).

But using a fast micro usb SD card, and using the LE USB Creator, I installed the LibreELEC-S912.arm-8.2-8.2.2.3

Then I searched for the right device tree, which I thought would be the 3/32G variant. But with that the Beelink did not boot.

The I added the gxm_q200_2g.dtb and renamed it to dtb.img and added it on the micro usb.

And finally tried to boot the Beelink again, with some searching for the reset switch. Which is located at the bottom, and only reachable with a paperclip!

forum.libreelec.tv/core/attachment/3489/

And yes, LE and Kodi where live. on 1080p/60Hz

With audio/DTS passtrough via pcm and full functionality (ethernet interface, remote control, wifi, usb).

For me this is currently fine, and i am not sending the Beelink GT1 Ultimate back to GearBest.

I did not try H265 and higher display resolution yet. Also did not try downscaling from 2/4K to 1080p yet.

Display More

Di

Did anyone find a dtb.img file for the Beelink GT1 Ultimate which allows the full 3Gb RAM to be seen without anything else going bust?

I mean mine is working fine with 2Gb, but I would increase the buffer sizes if I had 3Gb available.

Quote from masammut

Did anyone find a dtb.img file for the Beelink GT1 Ultimate which allows the full 3Gb RAM to be seen without anything else going bust?

I mean mine is working fine with 2Gb, but I would increase the buffer sizes if I had 3Gb available.

dtb.img.zip This works for me with the latest Builds from kzaq.

Quote from TheChief

johnberg

Read this thread, beginning around page 6. Maybe you find the fixed u-boot for your device here.

Thank you very much TheChief.

I read this thread about "U-boot", but I think it is a little bit too risky for me to do.

When I read "at your own risk" and "brick your box" I am getting a little bit scared.

It is also difficult to find the one and only workaround.

I think I keep it as it is and just boot to Andoid at the end of the evening, press the red button and it is also shutdown properly

Quote from johnberg

Thank you very much TheChief.

I read this thread about "U-boot", but I think it is a little bit too risky for me to do.

When I read "at your own risk" and "brick your box" I am getting a little bit scared.

It is also difficult to find the one and only workaround.

I think I keep it as it is and just boot to Andoid at the end of the evening, press the red button and it is also shutdown properly

For me the uboot fix does not work. Don't know why. My system then always crashes/hangs, but power on/off works.

Quote from TheChief

For me the uboot fix does not work. Don't know why. My system then always crashes/hangs, but power on/off works.

You forgot to mention that it just does not work for you. What is the length of your network cable? Does the router have 1Gbit connection, or only 100Mbit? If you have CE installed, try this dtb

Quote from bumerc

You forgot to mention that it just does not work for you. What is the length of your network cable? Does the router have 1Gbit connection, or only 100Mbit? If you have CE installed, try this dtb

I wrote "For me..."

But we can continue discussion in the other thread.

Hi there

I have a beelink GT1 2g/16G A912, no problem to install Libreelec from sdcard.
If I use the q201_2g.dtb file (the right one for my box), i have no wired network connection but only wifi.
If i use the q200_2g.dtb file, wired and wifi connection work.

In the two cases, it works perfectly at the first install, expect that I have to reboot many times so the network can work. I have noticed that when I boot and the network doesn't work, i have the libreelec logo as usual but the Kodi Krypton logo startup is loading very very fast.

I'm a regular user of Libreelec, got a s905x box with no problem at all.
I think it comes from the .dtb file, anyone have this kind of trouble?

Thx for your feedbacks.

PS : Just a tip for this box, if you remote does'nt work, that was my case, just copy the remote.conf file from your stock_android_firmware on your libreelec usb or sdcard.

Quote from julien_sgn

Hi there

I have a beelink GT1 2g/16G A912, no problem to install Libreelec from sdcard.
If I use the q201_2g.dtb file (the right one for my box), i have no wired network connection but only wifi.
If i use the q200_2g.dtb file, wired and wifi connection work.

In the two cases, it works perfectly at the first install, expect that I have to reboot many times so the network can work. I have noticed that when I boot and the network doesn't work, i have the libreelec logo as usual but the Kodi Krypton logo startup is loading very very fast.

I'm a regular user of Libreelec, got a s905x box with no problem at all.
I think it comes from the .dtb file, anyone have this kind of trouble?

Thx for your feedbacks.

PS : Just a tip for this box, if you remote does'nt work, that was my case, just copy the remote.conf file from your stock_android_firmware on your libreelec usb or sdcard.

Display More

Forget it, now i'm using CoreELEC, much better !

Quote from Pinki

tenis, here is my autostart.sh for speed and quality hdr

Code

#color
echo '444,10bit' > /sys/class/amhdmitx/amhdmitx0/attr

#noise reduction off
echo 0 > /sys/module/di/parameters/nr2_en

#cpu speedup
echo 20 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold
echo 50000 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
echo 2 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_down_factor

#gpu speedup
echo 2 > /sys/class/mpgpu/scale_mode

Display More

for me its forcing 1512Mhz cpu clock ->

Code

echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo performance > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor

I will use the 1512Mhz cpu clock. Have I to delete the 3 lines under #cpu speedup and put the 2 lines there? or can I put all 5 cpu lines there???

Hi, i buy a M8S Pro 2GB/16GB. I can't find a dtb.img that will work for network.

Mybe someone has a hint for me.

kind regrads Scan

Quote from Scan

Hi, i buy a M8S Pro 2GB/16GB. I can't find a dtb.img that will work for network.

Mybe someone has a hint for me.

kind regrads Scan

the dtb is based on RAM size & ethernet speed (hint)

thx bubblegum57, yes i now, but the image that i use with the right ram and ethernet speed, will only work with wlan and not with lan.

Quote from Scan

thx bubblegum57, yes i now, but the image that i use with the right ram and ethernet speed, will only work with wlan and not with lan.

well if you have tried all of the dtb's then perhaps there isn't one that will give you what you want.