[8.2.2.3] LibreELEC 8.2 for S912

  • using 8.2.5 i can't find a sleep.conf.sample in any folder of my x86 version. is there another way to enable hibernate mode?


    edit: oh looks like the wrong thread for this question

    is this really the solution to power down the device right from LE?

    Is this bringing the device in the same wakeup modus as when you boot to internal (Android) first and then shut off with the red button on the original remote?

    This is the way I power down now and I am looking so long for a proper solution to power off right from LE.

    I am using Wrxtasy's 8.2.4-subtitles-ff and have a H96 Pro+


    Update

    Ik tried workaround from Kszaq above.

    But it does not have any effect on powering off from LE.

    If you power off you can't boot anymore with the remote and need to off/on powersupply.

    When I Winscp to the sleep.conf.d folder again after reboot even a new sleep.conf.sample file has been created together with the modified sleep.conf file:|


    How do I get this standby modus without needing to boot to Android and power off from there:cool:

    Edited 3 times, last by johnberg ().

  • tenis, here is my autostart.sh for speed and quality hdr


    for me its forcing 1512Mhz cpu clock ->

    Code
    1. echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
    2. echo performance > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor

    i have a question. Do you put the last code with 1512mhz cpu clock simply under the first code? Or have I to delete the #cpuspeedup codes in the first code and put the second codes there?

  • johnberg  

    Read this thread, beginning around page 6. Maybe you find the fixed u-boot for your device here.

  • Di

  • Did anyone find a dtb.img file for the Beelink GT1 Ultimate which allows the full 3Gb RAM to be seen without anything else going bust?

    I mean mine is working fine with 2Gb, but I would increase the buffer sizes if I had 3Gb available.

  • Code
    1. Hello everybody,
    2. I have a Kiii pro on which I see sky.
    3. After a few minutes there are aberrations, the red color is no longer displayed correctly. This only happens on h.264 cannels.
  • Did anyone find a dtb.img file for the Beelink GT1 Ultimate which allows the full 3Gb RAM to be seen without anything else going bust?

    I mean mine is working fine with 2Gb, but I would increase the buffer sizes if I had 3Gb available.

    dtb.img.zip This works for me with the latest Builds from kzaq.

    Based in GERMANY — working in cigar business — part time freelance webdesigner — PS4 Console Gamer and TV Show Junkie :cool:


    S912 with CE on NAND — S905x with CE on SD-Card (with EmulationStation&KODI shanti‘s build) - Odroid N2 with CE on emmc and EmuELEC on SD-Cad — 4K 65“ Sony — 4K Onkyo DD/DTSHD/ATMOS Receiver



  • johnberg  

    Read this thread, beginning around page 6. Maybe you find the fixed u-boot for your device here.

    Thank you very much TheChief.


    I read this thread about "U-boot", but I think it is a little bit too risky for me to do.

    When I read "at your own risk" and "brick your box" I am getting a little bit scared.

    It is also difficult to find the one and only workaround.


    I think I keep it as it is and just boot to Andoid at the end of the evening, press the red button and it is also shutdown properly;)

  • For me the uboot fix does not work. Don't know why. My system then always crashes/hangs, but power on/off works.

  • For me the uboot fix does not work. Don't know why. My system then always crashes/hangs, but power on/off works.

    You forgot to mention that it just does not work for you:shy:. What is the length of your network cable? Does the router have 1Gbit connection, or only 100Mbit? If you have CE installed, try this dtb

  • You forgot to mention that it just does not work for you:shy:. What is the length of your network cable? Does the router have 1Gbit connection, or only 100Mbit? If you have CE installed, try this dtb

    I wrote "For me..." :D


    But we can continue discussion in the other thread.

  • Hi there

    I have a beelink GT1 2g/16G A912, no problem to install Libreelec from sdcard.
    If I use the q201_2g.dtb file (the right one for my box), i have no wired network connection but only wifi.
    If i use the q200_2g.dtb file, wired and wifi connection work.

    In the two cases, it works perfectly at the first install, expect that I have to reboot many times so the network can work. I have noticed that when I boot and the network doesn't work, i have the libreelec logo as usual but the Kodi Krypton logo startup is loading very very fast.


    I'm a regular user of Libreelec, got a s905x box with no problem at all.
    I think it comes from the .dtb file, anyone have this kind of trouble?


    Thx for your feedbacks.


    PS : Just a tip for this box, if you remote does'nt work, that was my case, just copy the remote.conf file from your stock_android_firmware on your libreelec usb or sdcard.

  • Forget it, now i'm using CoreELEC, much better !

  • tenis, here is my autostart.sh for speed and quality hdr


    for me its forcing 1512Mhz cpu clock ->

    Code
    1. echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
    2. echo performance > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor

    I will use the 1512Mhz cpu clock. Have I to delete the 3 lines under #cpu speedup and put the 2 lines there? or can I put all 5 cpu lines there???

  • Hi, i buy a M8S Pro 2GB/16GB. I can't find a dtb.img that will work for network.

    Mybe someone has a hint for me.


    kind regrads Scan

  • Hi, i buy a M8S Pro 2GB/16GB. I can't find a dtb.img that will work for network.

    Mybe someone has a hint for me.


    kind regrads Scan

    the dtb is based on RAM size & ethernet speed (hint)

    Samsung RU7400 Onkyo HTX22HDX Nvidia Shield HD Homerun Duo (Living Room)

    Samsung UE40ES5500 H96 Pro (Coreelec), Fire TV 4K Stick (Bedroom)

    Synology DS414 Plex Pass

    :)

  • thx bubblegum57 , yes i now, but the image that i use with the right ram and ethernet speed, will only work with wlan and not with lan.

    well if you have tried all of the dtb's then perhaps there isn't one that will give you what you want.

    Samsung RU7400 Onkyo HTX22HDX Nvidia Shield HD Homerun Duo (Living Room)

    Samsung UE40ES5500 H96 Pro (Coreelec), Fire TV 4K Stick (Bedroom)

    Synology DS414 Plex Pass

    :)