Thoradia Add-ons

  • Thank you nolimitz for detailed steps BUT still I can't figure it out.


    After placing dir=/storage/downloads line in aria2.conf, my downloads still go to root directory. What I mean is that after downloading the file if I issue "ls -all" command (at LIBREELEC command prompt in SSH), my downloaded file shows up there and not in /storage/downloads. This has been my problem from beginning. No matter what directory I specify in aria2.conf file, download always go to root directory and not in /storage/downloads.


    Could you tell my how to solve this?


    Welcome.


    After you added the line in aria2.conf , did you restart service?


    Are you trying to download using web ui?


    Can you show a screesnhot of the web ui?

  • After you added the line in aria2.conf , did you restart service? - Yes I did.


    Are you trying to download using web ui? - No. For some reasons I can't get webui to get it to connect aria2c. I am using command line commands to download stuff using Putty. Command I am using to download is aria2c "http address" (see screenshot 2)


    Can you show a screesnhot of the web ui? Please see attached screenshots. Screenshot (1) is ls -all command before downloading anything. Screenshot (2) is aria2c "http adress" command which shows download location as "/storage/filename" NOT "/storage/downloads/file name" as mentioned in my arai2.conf dir location. (For your information, my aria2.conf has only one line which is dir=/storage/downloads).

    Screenshot (3) shows ls -all command result after downloading the file which shows file has downloads to /storage location and NOT /storage/downloads location.


    ***Website on screenshot is legal music site to download music.






  • Web ui should work, just put correct ip address of libreelec with aria2 in settings.


    For command line downloads, i guess you should follow the manual of aria2 at, havent tried it though:


    aria2c(1) — aria2 1.33.1 documentation


    Check first basic option:


    Code
    1. -d, --dir=<DIR>
  • Thank you nolimitz for guiding me on this matter. Appreciate your time.


    However after trying all different options, I can't get it to work. Webui simply doesn't connect. No matter what I do, command line commands always downloads to /storage location instead of /storage/Downloads.


    I have even tried this docker aria2webui . Nothing works.


    Therefore, I tried different option of using pyload by installing it on Asus router. It is working for my needs.


    Thanks to Thoradia for these addons. :)

  • hi there,


    Awesome software, and great support in this thread!


    I have an issue with Jackett, I wonder if anyone can help.


    I had a working set up on an S905 device. I then made a backup and moved to an Intel x86 machine.


    Now I can't seem to connect to any indexers in Jackett. Tried deleting user data in Jackett and reinstalling, but no joy.


    Error log:



    Any help would be much appreciated!


  • Add-on data can be re-used, but S905 binaries will not run on x86_64.

    You must update your add-ons: Thoradia, Mono, Thoradia Mono Tools, Jackett, etc.

    Keep it legal and carry on

  • I tried uninstalling all the apps (after deleting all user data), then reinstalling fresh. Still getting the issue, Anything else I can try? Any other things I can test to diagnose the issue?

  • Seems to be a connection issue. When I try to connect to the same site using curl in the command line, I get connection refused. Seems to be a larger issue!


    Maybe router or DNS or VPN???


    Update: I reckon it is a VPN issue, as can connect to all other sites using curl, but not 1337x as it is blocked in UK without VPN, so must be a VPN problem!!

    Edited once, last by dins dale ().

  • Found the cause of the issue - Jackett is using https instead of http for the indexers.

    Any ideas how to fix this??


    UPDATE: Seems to be an issue using CAPTCHAS for certain indexers. Seems to be a known issue with Jackett. Not in the scope for this thread then!

    Edited once, last by dins dale ().

  • Sonarr has stopped working with error: MediaInfo Library could not be loaded libmediainfo.so.0


    I believe this is since the latest update.


    How can I resolve this problem?

  • Sonarr has stopped working with error: MediaInfo Library could not be loaded libmediainfo.so.0


    I believe this is since the latest update.


    How can I resolve this problem?

    Thanks for the feedback.

    This problem occurs on LibreELEC 9.0 (unstable, pre-alpha) and could be caused by LibreELEC, Mono or my add-ons.

    I will address it when LibreELEC 9.0 settles (reaches alpha).

    Keep it legal and carry on

  • Hey!

    great work thoradia

    first sorry for my english

    I want to use rtorrent+rutorrent and transmission, but could not be run, I dont know what is my wrong.

    I use TVbox S912 2G+16G, try use libreelec 8.2 could not be run. I can run OS "LibreELEC 9.0 Alpha for Amlogic S905/S912 devices"


    I have add thoradia repositiories but "could not connect repositiores", then I download zip, rtorrent rutorrent transmission, from github : thoradia/thoradia/tree/master/9.0/Odroid_C2/aarch64 , install and not be run.


    first is rtorrent, i copy from my route config file rtorrent.rc, put to "/storage/.kodi/addons/service.rtorrent/doc/rtorrent.rc" and fix download dir. but rtorrent could not run.


    I try debug

    LibreELEC:~/.kodi/addons/service.rtorrent/bin # rtorrent

    -sh: rtorrent: not found

    LibreELEC:~/.kodi/addons/service.rtorrent/bin # /storage/.kodi/addons/service.rtorrent/bin/rtorrent

    -sh: /storage/.kodi/addons/service.rtorrent/bin/rtorrent: not found

    LibreELEC:~/.kodi/addons/service.rtorrent/bin # ls -al /storage/.kodi/addons/service.rtorrent/bin/rtorrent

    -rwxr-xr-x 1 root root 1271744 Mar 6 22:36 /storage/.kodi/addons/service.rtorrent/bin/rtorrent



    LibreELEC:~ # systemctl start service.rtorrent

    LibreELEC:~ # netstat -anpt|grep 5000

    LibreELEC:~ # systemctl status service.rtorrent

    ● service.rtorrent.service - rTorrent

    Loaded: loaded (/storage/.kodi/addons/service.rtorrent/system.d/service.rtorrent.service; enabled; vendor preset: disabled)

    Active: inactive (dead) since Wed 2018-03-07 13:51:40 CST; 36min ago

    Docs: Home · rakshasa/rtorrent Wiki · GitHub

    Process: 3029 ExecStop=/bin/sh /storage/.kodi/addons/service.rtorrent/bin/rtorrent-ctl stop (code=exited, status=0/SUCCESS)

    Process: 2977 ExecStart=/bin/sh /storage/.kodi/addons/service.rtorrent/bin/rtorrent-ctl start (code=exited, status=0/SUCCESS)

    Main PID: 3026 (code=exited, status=0/SUCCESS)


    Mar 07 13:51:40 LibreELEC systemd[1]: Starting rTorrent...

    Mar 07 13:51:40 LibreELEC systemd[1]: Started rTorrent.


    LibreELEC:~ # ps|grep torrent

    3016 root 0:00 httpd -c /storage/.kodi/addons/service.rutorrent/config/httpd.conf -p 6880

    3300 root 0:00 grep torrent


    LibreELEC:~ # netstat -anpt

    Active Internet connections (servers and established)

    Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name

    tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1/systemd

    tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 3017/kodi.bin

    tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2609/sshd

    tcp 0 0 0.0.0.0:36666 0.0.0.0:* LISTEN 3017/kodi.bin

    tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 2734/smbd

    tcp 0 0 0.0.0.0:4713 0.0.0.0:* LISTEN 2554/pulseaudio

    tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 2734/smbd

    tcp 0 820 192.168.78.38:22 192.168.78.50:3263 ESTABLISHED 3203/1

    tcp 0 0 :::111 :::* LISTEN 1/systemd

    tcp 0 0 :::8080 :::* LISTEN 3017/kodi.bin

    tcp 0 0 :::22 :::* LISTEN 2609/sshd

    tcp 0 0 :::36666 :::* LISTEN 3017/kodi.bin

    tcp 0 0 :::445 :::* LISTEN 2734/smbd

    tcp 0 0 :::6880 :::* LISTEN 3016/httpd

    tcp 0 0 ::1:9090 :::* LISTEN 3017/kodi.bin

    tcp 0 0 :::4713 :::* LISTEN 2554/pulseaudio

    tcp 0 0 :::139 :::* LISTEN 2734/smbd


    have the bin file, but notify "no found"

    have no run, but log tail me have run.


    what should I do ? what is my wrong ?

  • Thanks for the feedback.

    This problem occurs on LibreELEC 9.0 (unstable, pre-alpha) and could be caused by LibreELEC, Mono or my add-ons.

    I will address it when LibreELEC 9.0 settles (reaches alpha).

    Considering I have been running the alpha flawlessly for a long time now, this is very disappointing...


    I have asked for help from the Sonarr team but they said they can't do anything.


    Is there nothing I can do manually that might fix this?

  • Use zip files for RPi2/arm

    Keep it legal and carry on

  • Considering I have been running the alpha flawlessly for a long time now, this is very disappointing...


    I have asked for help from the Sonarr team but they said they can't do anything.


    Is there nothing I can do manually that might fix this?

    I checked:

    libmediainfo.so.0 is in LD_LIBRARY_PATH, but Lidarr/Sonarr/Radarr do not pick it up

    Code
    1. [Error] VideoFileInfoReader: mediainfo is required but was not found
    2. [v2.0.0.5153] System.DllNotFoundException: libmediainfo.so.0
    3. at (wrapper managed-to-native) NzbDrone.Core.MediaFiles.MediaInfo.MediaInfo.MediaInfo_New()
    4. at NzbDrone.Core.MediaFiles.MediaInfo.MediaInfo..ctor () [0x00006] in <907396538063488ebd3918dbee5833ec>:0
    5. at NzbDrone.Core.MediaFiles.MediaInfo.VideoFileInfoReader.GetMediaInfo (System.String filename) [0x00021] in <907396538063488ebd3918dbee5833ec>:0
    6. [Error] DetectSample: Failed to get runtime from the file, make sure mediainfo is available

    I will try to fix when I have the time.

    Where did you ask help at Sonarr?

    Keep it legal and carry on