LibreELEC (Matrix) 10.0.1

    Source: https://libreelec.tv/2021/11/03/libreelec-matrix-10-0-1/

    WARNING: Manual update with settings addon from 10.0.0 to 10.0.1 just lead to "factory reset" to 10.0.0 here with lots of garbage in


    Code
    drwx------  166 root     root          4096 Jan  1  1970 /storage/lost+found
587.4M	/storage/lost+found
LibreELEC fsck: STORAGE: clean, 6986/839680 files, 719592/3358720 blocks


    after displaying "file system corruption detected" at reboot and a long fsck looked like the sdcard was broken.


    No logs left. sdcard ok in dmesg and journalctl.


    Maybe the reason for the crash was systemd mounted nfs4 shares under /storage/<mount-point>

    Edited 2 times, last by woprr ().

    Thanks for the new release.


    On a RPi4, using 1080p hdmi out, the brightness is double what it was under 10.0.0, for both the UI and videos. This causes everything to look washed out.


    Note: hdmi0 for video, hdmi1 for audio.

    Quote from woprr

    WARNING: Manual update with settings addon from 10.0.0 to 10.0.1 just lead to "factory reset" to 10.0.0 here with lots of garbage in

    That is very likely due a file system corruption, most likely your SD Cards is dead. Ofc could be the result of a weak power supply and whatnot too.

    Thanks guys, great release as usual!

    Where and how should I post some logs? There is one 4K file which just goes out of sync after a few seconds of playback. Its the only one with a DTS audio track, everything else I have is Dolby and plays without any issues.

    Quote from silentsound

    Where and how should I post some logs?

    For any issues, create a new thread in the appropriate forum section, and place log files onto pastebin or Kodi's pastebin website. Then paste the link thereof into your new thread.

    I have problems with the update from 10.0.0 to 10.0.1 on my Pi4. I've copied 10.0.1.img.gz file to the Update folder and restarted. LE decompresses the file and reboots as usual. After that I can only see the boot-rainbow-screen and then... nothing. My tv says "HDMI1 No Signal".

    I can ssh to LE and the console says 10.0.1 (official). I copied the 10.0.1 file again to the Update folder, another reboot and still "No Signal".


    At last the downgrade to 10.0.0 is working, i've copied the 10.0.0 file to the Update folder and after a reboot, Kodi shows again...


    Someone with similiar problems?

    discus here LE 10.0.1 / Rpi4 / No picture after update from LE 10.0.0

    Quote from ambetanterix

    Thanks for the new release.


    On a RPi4, using 1080p hdmi out, the brightness is double what it was under 10.0.0, for both the UI and videos. This causes everything to look washed out.


    Note: hdmi0 for video, hdmi1 for audio.

    Same here