7.0.2.009 build for S905/S905X

Quote from stormrev

Yep! I've workd too much today...swapped by mistake the minimx dtb with the wetek hub dtb.
All is working fine now!
Thanks
[hr]

I'll try on 2nd minimx and get back to you. thanks for the excellent work.
It's a pity the mem leak problem cannot be addressed for 1GB devices
also the annoying "cannot resume from suspend" thing
but other than that, it's a prfect kodi box.
thanks again for the release kszaq!

update: seen the "Updating device tree from /storage/.update/... " and now is working fine..
bye

Display More

I can't add UPNP devices (miniDLNA and WD Cloud DLNA). When i chose to browse UPNP no devices discovered. TV on the same switch works ok.

Quote from atreyu

Yes, i have heard some more similar issues for people with different backends on several machines.
Maybe something to do with the used format/stream/etc. per channel. For me it's mostly HD channels that have stuttering with steady intervals in this build.
Previous build was one big jerky mess for all channels. Everything else plays fine, though.

I use tvheadend client with hd and sd channels, and I don't have problem.
(server running on other device)

Does this build have the audio static/pop issues in the post-008 dev builds?

I use tvheadend too: i notice stutter only with mpeg2 channels (of course low bitrate channel ~ 3 Mbit) vq in near 0% in these channels and after some minute seems to stabilize at 6\7% so not a big deal. 4K /HD channels no problem. (And also sd h264 channels) btw i consider this build more stable concerning live TV than older builds: reverting fast analyze fix a lot of problem, and also channel switch is very fast while keeps sync.

I had to enable wait for network on boot and now Upnp is working fine in the previous build (005 or 006) i had on the box it was unnecessary
.

just updated from .007 version on my beelink mini mx 1G/8GB , everything went well , but on the end I have one big issue

didn't seen anybody posted about it, thing is that ethernet connection can't be established , wifi work ok but wired connection doesnt at all

I try reboot box and rooter , problem remain

any suggestion is welcome, in a meanwhile back on .007 where is no such problems

Quote from stormrev

problem w/ audio for me too with beelink minimx 1G Ram 1Gbit LAN

updated to 009 using gxbb_p200_1G_1Gbit.bin
copied as dtb.img (and ledtb.img.. just in case..)
but no sound:
In kodi > sys>audio dev> there's only bluetooth audio and no other selectable audio

If you read OP and a few post below it, you would get your answer.

Trying the . 009 build (running from sdcard). Froze once in settings, after reboot it didnt anymore.

I have a problem with audio, theres a weird hissing? Sound like some static or something, and it stays until I start a video. At start, it cracks/pops 1 time then the noise/static is gone and audio is normal from the video. If I hiz pause, static is back. If I hit play, again the pop and all normal. So hitting pause/play I can hear it pop pop pop. . .

In android using SPMC latest (android KODI fork) this is not present. Here the audio is completely silent, dead, no static or hissing or cracking.

Im still a LE/kodi newbie, so it might be a setting Im missing, any ideas anyone?

Edit; ill answer myself, from the op:
Some clicks/pops can appear when no audio is playing.

Too bad, it's really annoying Hoping it gets fixed in future builds.

Quote from kszaq

People having issues with audio:

• have you seen "Updating device tree from [i]device tree name[/i]" on update screen?
• can you try manually replacing device tree if you run from SD card?

1. dtb.img gives me error message, no system image found (or similar). The gxbb_....dtb file won't even be tried.

2. Trying right now, but need to know where to look. (Asking google right now ) found it Trying right now
Edit: Manual replacement is working

OK, so having issues with video quality. Specifically screen is too dark, too saturated and contrast is too high.

The OSD Video settings help a tiny bit, but saturation is a problem. Settings on my TV have to be set at extreme ranges to get a good picture.

I can manipulate the sysfs values in /sys/class/amvecm/ and/or /sys/devices/virtual/amhdmitx/amhdmitx0 (saturation_hue_post, output_rgb, etc) to get acceptable results, but of course any start or stop of video in kodi resets these.

So question is: where are the relevant settings in kodi to manipulate these values globally? I have seen the following in guisettings.xml. I tried manipulating them directly and by overrides in advancedsettings to no avail. They must be getting maniplulated on the fly in kodi somewhere, but I just can't find find them. Hardcoded? Seems unlikely.

<defaultvideosettings>
<sharpness>0.000000</sharpness>
...
<brightness>50.000000</brightness>
<contrast>50.000000</contrast>
<gamma>20.000000</gamma>
...
</defaultvideosettings>

<videoscreen>
...
<limitedrange default="true">false</limitedrange>
...
</videoscreen>

Specs: x96 box S905x 2g/16G

Updating went well, but by putting "gxbb_p200_2G_1Gbit.dtb" togheter with the img.gz file in the update folder did"nt work for me, the update failed! I did the update without the device-tree and everything went well, manually I putted the dbt.img and now I have I nice working system without stuttering or any buffering issues.
Many thanks Kszaq, keep up the good work, I think You deserve some beers!

cheers!
Jefken.

Quote from ant_thomas

Does this build have the audio static/pop issues in the post-008 dev builds?

Yes it does mate.
[hr]
@kszaq....just updated from previous development build to latest build via update folder for both my Nexbox A95X 1gb/8gb and also my Beelink Mini MXiii 2gb/16gb and all seems spot on. The pop and crackle is there, but you are already aware of this. Coffees coming up.

cheers

Quote from envagyok

I use tvheadend client with hd and sd channels, and I don't have problem.
(server running on other device)

Hi, envagyok

Which tvheadend are You using and on which box?
kind regards,
Jefken.

Quote from darren1963

Yes it does mate.
[hr]
@kszaq....just updated from previous development build to latest build via update folder for both my Nexbox A95X 1gb/8gb and also my Beelink Mini MXiii 2gb/16gb and all seems spot on. The pop and crackle is there, but you are already aware of this. Coffees coming up.

cheers

I upgraded and didn't hear any. I'll do some more testing.

I installed this version on Nexbox A95X everything working great for now but still testing. Have one question, about power off/power on on remote control which is not working. Can anyone help with that. I saw one time something about changing keymap but can't find it now.

I am getting this error while install

Carting debugging shell... type exit to quit ###
Can't access tty; job control turned off

Any body can help me ?

Quote from jazzy

I installed this version on Nexbox A95X everything working great for now but still testing. Have one question, about power off/power on on remote control which is not working. Can anyone help with that. I saw one time something about changing keymap but can't find it now.

Try Keymap Editor Program in Kodi Repo (Program)