reinstalled but cant scan any ideas, if i mind right it may have been a edit that was required to get working , i had a txt file with teh comands/ what tp do buty had HDD FAILERZ so lost all data and my how to guides to get workingCode9.107849] systemd-journald[210]: Received request to flush runtime journal from PID 1 [ 9.632448] intel_rng: FWH not detected [ 9.651118] Linux video capture interface: v2.00 [ 9.688582] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC883: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 9.688588] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.688592] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 9.688594] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 9.688597] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 9.688600] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 9.688603] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 9.688606] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 9.694623] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 9.694801] saa7134: saa7133[0]: found at 0000:02:01.0, rev: 209, irq: 22, latency: 84, mmio: 0xfddff000 [ 9.694808] saa7134: saa7133[0]: subsystem: 185b:c900, board: Compro VideoMate S350/S300 [card=169,insmod option] [ 9.694831] saa7134: saa7133[0]: board init: gpio is 843f00 [ 9.736695] Registered IR keymap rc-videomate-s350 [ 9.736829] input: saa7134 IR (Compro VideoMate S3 as /devices/pci0000:00/0000:00:1e.0/0000:02:01.0/rc/rc0/input5 [ 9.736893] rc0: saa7134 IR (Compro VideoMate S3 as /devices/pci0000:00/0000:00:1e.0/0000:02:01.0/rc/rc0 [ 9.763871] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 9.764663] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 9.764756] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 9.764850] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 9.764939] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 9.765037] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 9.893802] saa7134: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 9.893807] saa7134: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 9.893809] saa7134: i2c eeprom 20: 01 40 01 02 02 01 03 01 08 ff 00 87 ff ff ff ff [ 9.893811] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.893813] saa7134: i2c eeprom 40: ff d6 00 c0 86 1c 02 01 02 ff ff ff ff ff ff ff [ 9.893815] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb [ 9.893817] saa7134: i2c eeprom 60: 35 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.893819] saa7134: i2c eeprom 70: 00 00 00 00 46 5a ff ff ff ff ff ff ff ff ff ff [ 9.893820] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.893822] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.893824] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.893826] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.893828] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.893830] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.893832] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.893833] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.894888] saa7134: saa7133[0]: registered device video0 [v4l2] [ 9.895412] saa7134: saa7133[0]: registered device vbi0 [ 9.925894] saa7134_dvb: dvb_init() allocating 1 frontend [ 9.983361] DVB: registering new adapter (saa7133[0]) [ 9.983371] saa7134 0000:02:01.0: DVB: registering adapter 0 frontend 0 (Zarlink ZL10313 DVB-S)... [ 10.212988] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null) [ 10.292239] nvidia: module license 'NVIDIA' taints kernel. [ 10.292245] Disabling lock debugging due to kernel taint
LibreELEC 8.x images for additional dvb drivers
-
CvH -
April 17, 2016 at 7:29 PM -
Thread is Unresolved
-
-
Yes it seems to. I can do a scan and it finds 2 frequencies. Then a Airscan gives me the information for the frequencies.Ok, so i add support to linux driver
dvb-usb-cxusb: Geniatech Mygica T230C2 support -
Ok, so i add support to linux driver
dvb-usb-cxusb: Geniatech Mygica T230C2 support
Thank you very much CrazyCat.
Now for the noob question. How do I get it into my RPi 2 or Odroid C2 Libreelect?
Any pointers would be welcome. -
thanks Crazycat.
Also, how would I go about getting this onto the Wetek Play 2
-
wait updated LE build from CvH
-
wait updated LE build from CvH
OK thanks again. I will hurry up and wait
-
There is any option to install your drivers in a LibreELEC already installed?
Regards and thanks for the work!
-
Hey there CvH and LE-Team!
Congratulations on your new Update LE 8.0.1!
Can't wait for the next Release with Digital Devices drivers!
Greetings.
-
Hey there CvH and LE-Team!Congratulations on your new Update LE 8.0.1!
Can't wait for the next Release with Digital Devices drivers!
Greetings.
Will the "Full Spectrum - DD Max S8 " card be supported?
Thanks. -
Will the "Full Spectrum - DD Max S8 " card be supported?
Thanks.
JohnBoyz @OnbedkendHH
CvH released LE8.0.1 with DD support: LibreELEC-Generic.x86_64-8.0.1-digital_devices.img.gz
It works with my DD-Card. I can't say if it does with yours.Thank you, CvH
-
JohnBoyz @OnbedkendHH
CvH released LE8.0.1 with DD support: LibreELEC-Generic.x86_64-8.0.1-digital_devices.img.gz
It works with my DD-Card. I can't say if it does with yours.Thank you, CvH
CvH any chance of a play2 release with the t230c drivers or is there already one somewhere thanks
-
CvH... you're the best! Thanks man!
-
I'm thinking about getting the Hauppauge WinTV-quadHD to use it for dvb-c in Germany with libreelec and TVHeadend.
According to linuxtv.org there are two different versions - one north american and one european. They say the european version, which I would be using, requires dvb-demod-si2168-b40-01.fw as firmware and the drivers are included in Linux Kernel 4.8.
Is anyone using this TV-card? Is it working with CvH's libreelec version?
-
Hello,
in the german Kodinerds forum you mentioned the TT- budget S2-4200 Twin as a good cart.
Are the drivers of this card included in your latest build?
Do i have to copy the firmware into the /lib/firmware folder
And a last question - shall i wait with installing till there is the hardware complete? -
Okay so because nobody even downloaded my provided log, i will put it in a post here.
Hopefully somebody can help me this time.
Hardware: ################################################################################ - Pastebin.com
System: ################################################################################ - Pastebin.com
Kodi: Chop – Post code, write notes and share feedback (too large for pastebin)If you need other logs please tell me.
-
I may have posted in the wrong Forum/Thread... sorry!
so for the CvH image is the TBS 5520 SE supported or not? the TBS 5520 is reportedly working fine, but the SE (without remote control) seems to be missing... my current LibreELEC-Generic.x86_64-7.0.2-dvb-drivers-1.66 with TBS driver installed "dmesg|paste"d > QCWY
-
I think 5520se supported, by not tested. I have only 5520 sample (avalink demod based).
-
I think 5520se supported, by not tested. I have only 5520 sample (avalink demod based)thx for info - dumb question but am I missing any steps?
just installed LE, plugged usb tbs5520se in and selected some TBS Driver in DVB Driver Configuration. meanwhile I tested some other images (incl. CvH 8.0.1 test images) without any success.
do i have to modprobe some modules? just read this for some other cards/boxes?
I recognized that an firmware dvb-usb-tb5520. fw exists in LE. latest from TBS includes dvb-usb-tbs5520-01.fw instead - but it did not give any success either... drives me crazy :s
