Hello everybody I'm looking for an addon or something that allow me to turn off/on the 5v pin in the GPIO4 of Raspberry Pi.
Does anyone know something about this?
Thank you very much!
Posts by [email protected]
-
-
Nothing with dvbviwer
-
Code
Display More2017-05-19 16:22:56.047 linuxdvb: Unhandled signal scale: 0 2017-05-19 16:22:56.062 linuxdvb: Unable to provide UNC value. 2017-05-19 16:23:27.000 subscription: 0015: "epggrab" unsubscribing 2017-05-19 16:23:28.000 mpegts: 570MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:23:28.000 subscription: 0017: "epggrab" subscribing to mux "570MHz", weight: 4, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:23:42.381 mpegts: 738MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:23:42.381 subscription: 0017: "epggrab" unsubscribing 2017-05-19 16:23:42.381 subscription: 0019: "scan" subscribing to mux "738MHz", weight: 6, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:23:47.000 mpegts: 738MHz in 1 - scan no data, failed 2017-05-19 16:23:47.000 subscription: 0019: "scan" unsubscribing 2017-05-19 16:23:47.000 mpegts: 730MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:23:47.000 subscription: 001C: "scan" subscribing to mux "730MHz", weight: 6, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:23:52.000 mpegts: 730MHz in 1 - scan no data, failed 2017-05-19 16:23:52.000 subscription: 001C: "scan" unsubscribing 2017-05-19 16:23:52.000 mpegts: 490MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:23:52.000 subscription: 001F: "scan" subscribing to mux "490MHz", weight: 6, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:23:57.004 mpegts: 490MHz in 1 - scan no data, failed 2017-05-19 16:23:57.004 subscription: 001F: "scan" unsubscribing 2017-05-19 16:23:57.004 mpegts: 508MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:23:57.004 subscription: 0022: "scan" subscribing to mux "508MHz", weight: 6, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:24:02.000 mpegts: 508MHz in 1 - scan no data, failed 2017-05-19 16:24:02.000 subscription: 0022: "scan" unsubscribing 2017-05-19 16:24:02.000 mpegts: 642MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:24:02.000 subscription: 0025: "scan" subscribing to mux "642MHz", weight: 6, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:24:07.008 mpegts: 642MHz in 1 - scan no data, failed 2017-05-19 16:24:07.008 subscription: 0025: "scan" unsubscribing 2017-05-19 16:24:07.008 mpegts: 698MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:24:07.008 subscription: 0028: "scan" subscribing to mux "698MHz", weight: 6, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:24:12.000 mpegts: 698MHz in 1 - scan no data, failed 2017-05-19 16:24:12.000 subscription: 0028: "scan" unsubscribing 2017-05-19 16:24:12.000 mpegts: 746MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:24:12.000 subscription: 002B: "scan" subscribing to mux "746MHz", weight: 6, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:24:17.005 mpegts: 746MHz in 1 - scan no data, failed 2017-05-19 16:24:17.005 subscription: 002B: "scan" unsubscribing 2017-05-19 16:24:17.005 mpegts: 778MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:24:17.006 subscription: 002E: "scan" subscribing to mux "778MHz", weight: 6, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:24:22.000 mpegts: 778MHz in 1 - scan no data, failed 2017-05-19 16:24:22.000 subscription: 002E: "scan" unsubscribing 2017-05-19 16:24:22.000 mpegts: 570MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:24:22.000 subscription: 0031: "scan" subscribing to mux "570MHz", weight: 6, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:24:27.007 mpegts: 570MHz in 1 - scan no data, failed 2017-05-19 16:24:27.007 subscription: 0031: "scan" unsubscribing 2017-05-19 16:24:28.000 mpegts: 570MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:24:28.000 subscription: 0033: "epggrab" subscribing to mux "570MHz", weight: 4, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:25:03.000 subscription: 0033: "epggrab" unsubscribing 2017-05-19 16:25:04.000 mpegts: 778MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:25:04.000 subscription: 0035: "epggrab" subscribing to mux "778MHz", weight: 4, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:25:39.000 subscription: 0035: "epggrab" unsubscribing 2017-05-19 16:25:40.000 mpegts: 746MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:25:40.000 subscription: 0037: "epggrab" subscribing to mux "746MHz", weight: 4, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:26:15.000 subscription: 0037: "epggrab" unsubscribing 2017-05-19 16:26:16.000 mpegts: 698MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:26:16.000 subscription: 0039: "epggrab" subscribing to mux "698MHz", weight: 4, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:26:51.000 subscription: 0039: "epggrab" unsubscribing 2017-05-19 16:26:52.000 mpegts: 642MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:26:52.000 subscription: 003B: "epggrab" subscribing to mux "642MHz", weight: 4, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:27:27.000 subscription: 003B: "epggrab" unsubscribing 2017-05-19 16:27:28.000 mpegts: 508MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:27:28.000 subscription: 003D: "epggrab" subscribing to mux "508MHz", weight: 4, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription" 2017-05-19 16:28:03.000 subscription: 003D: "epggrab" unsubscribing 2017-05-19 16:28:04.000 mpegts: 490MHz in 1 - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0 2017-05-19 16:28:04.000 subscription: 003F: "epggrab" subscribing to mux "490MHz", weight: 4, adapter: "Realtek RTL2832 (DVB-T) : DVB-T #0", network: "1", service: "Raw PID Subscription"Maybe this is helpful, this is what happen when I force my Network to Scan.
-
like said unlikely, i would bet at not that good reception -> try a better position or a better antenna
I tried with a MCX adaptor to the main antenna of the building. (Yes, I tried a lot of things, bodering you is my last resource)
-
hmm maybe antenna (reception is too worse)? maybe the stick is faulty ?
unlikely that all drivers fail
(not ruled out of course)I've an online store and I ordered 10 of this devices, all of them do the same. They can be broken but is very strange.
Yes I can view all channels available on the two muxes in my location..
Did you create the correct network for your location and apply it to the device in the tuner settings in tvheadend?
Yes, I did all the steps so many times and with differents tests. Even my customers tried to configurate them with same results.
-
Ok I tried in W10 (no Kodi) and it does the same. Image Attatched.
CvH, I'm reading that in Spain we still with Dvb-T1 until 2020, so, is a general issue with the driver?
Regards.
-
I just plugged in my rtl2832 to a running LibreElec and was able to set it up in Tvheadend without problems.
Code
Display More[ 567.305740] usb 1-6: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ 567.363351] usb 1-6: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 567.363378] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ 567.379759] i2c i2c-13: Added multiplexed i2c bus 14 [ 567.379764] rtl2832 13-0010: Realtek RTL2832 successfully attached [ 567.379782] usb 1-6: DVB: registering adapter 4 frontend 0 (Realtek RTL2832 (DVB-T))... [ 567.398937] r820t 14-001a: creating new instance [ 567.405967] r820t 14-001a: Rafael Micro r820t successfully identified [ 567.414850] Registered IR keymap rc-empty [ 567.415249] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/rc/rc0/input12 [ 567.416413] rc rc0: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/rc/rc0 [ 567.422942] usb 1-6: dvb_usb_v2: schedule remote query interval to 200 msecs [ 567.427640] lirc_dev: IR Remote Control driver registered, major 245 [ 567.431174] rc rc0: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0 [ 567.431180] IR LIRC bridge handler initialized [ 567.433098] usb 1-6: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ 567.433180] usbcore: registered new interface driver dvb_usb_rtl28xxu [ 572.344982] usb 1-6: DVB: adapter 4 frontend 0 frequency 0 out of range (174000000..862000000)Did you see any channel?
Cvh, in my case I saw the adapter but it fails in the scan moment.
Thanks!
-
-
Will be helpfull if I send one to you?
I really think that is a driver problem, as I said, tvheadend shows the device, but it doesn't show any channel.
I wrote this guide in my web, this is the way I use it.
#Instalacion_y_configuracion_de_un_TDT_USB_DVB_USB
Thanks for everything!
-
I think there is not a correct driver for this device.
I just investigate a lot for this subject and I finally arrive here because the comment of an user in this post:
The problem Is that the device is detected by LibreELEC and TVheadend but it doesn't work propertly with the muxes.
Thanks a lot and regards. If you need any more info please ask me.
-
There is any option to install your drivers in a LibreELEC already installed?
Regards and thanks for the work!
