Realtek RTL2832 failed to tune

Swovdov · June 7, 2017 at 10:33 PM

I'd like to watch german dvb-t2 TV on my raspberry 2

I have a dvb-t2 usb adaptor which is working fine with its correcponding software at Window 10. Thus I know, this adaptor is working.

I am experienced with tvheadend and its webinterface configuration tool. First configure adaptor. Then create a network. Then add correct muxes. With my old dvb-t usb adaptor all went fine.

With the new it isn't. I get these errors:

Code

2017-06-07 23:00:17.864 mpegts: 626MHz in DVB-T2-Dingens - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0

Code

2017-06-07 23:00:17.864 linuxdvb: Realtek RTL2832 (DVB-T) : DVB-T #0 - failed to tune [e=Invalid argument]

Code

2017-06-07 23:00:17.864 mpegts: 490MHz in DVB-T2-Dingens - tuning on Realtek RTL2832 (DVB-T) : DVB-T #0

Code

2017-06-07 23:00:17.865 linuxdvb: Realtek RTL2832 (DVB-T) : DVB-T #0 - failed to tune [e=Invalid argument]

and scanning fails. Thus I have no services, no tv programs.

What is going wrong?

albnavper@gmail.com · June 12, 2017 at 2:47 PM

Same as me here Realtek RTL2832 DVB-T

**CvH** · June 12, 2017 at 7:53 PM Official Post

Quote from Swovdov

I'd like to watch german dvb-t2 TV on my raspberry 2

RPi2/3 is too slow for german DVB-T2 channels that are using HEVC(H265) instead of the old H264.

Quote from Swovdov

tuning on Realtek RTL2832 (DVB-T)

this is an DVB-T1 stick that supports no DVB-T2 at all (at least google tells me)