[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices

rosenrot

There is no 'best settings', these settings are used when you have compatibility issues with your TV (RGB) and the 10 bit options are good for 4K HDR TVs.

TheMexx

Have you went into audio settings (Settings -> System -> Audio, make sure you're set to Expert) and select the correct audio device with the proper passthrough configuration?

Quote from The Coolest

rosenrot

There is no 'best settings', these settings are used when you have compatibility issues with your TV (RGB) and the 10 bit options are good for 4K HDR TVs.

Thanks, I see, so can the S905 do 10bit at all?

rosenrot

I have a S905X, and yes, it can do 10 bit.

Not sure about S905, but I don't think there's much difference.

S905 can't output 10bit, see this post.

No No No . Unless Below occurs.

Quote from TheMexx

gxl_p212_2g_nand.dtb

Quote from kszaq

If internal memory of your box is not visible when trying to install to internal memory (i.e. /dev/system does not exist):

try a device tree with _nand suffix

The Coolest thanks

If someone knows better, I would be thankful. Choosing 444,10bit works for me but I can not tell if it really does 10bit. Is there a way to check? TV does not tell anything.

Quote from afl1

Keyboard is recognized as USB device but if it is use as keyboard you have to show kernel log.

Reboot box and submit command dmesg | paste.

Post url.

ODL

You mean the problem could be the keyboard is not recognized as keyboard in libreelec?

GDPR-2 , but codesnake already fixed this dvb driver issue for Wetek play 2: WeTek Play 2: Add support for crazycat and hauppauge driver addons by codesnake · Pull Request #2513 · LibreELEC/LibreELEC.tv · GitHub

rosenrot

Then there's no way to tell for certain. There are video patterns you could run and try to see the difference between 8 bit and 10 bit, but it's not very effective.

Is it safe to update from kszaq build to this one? Since kszaq doesn't develop new builds i might be using this build....

Quote from Freaky69

Is it safe to update from kszaq build to this one? Since kszaq doesn't develop new builds i might be using this build....

Do not update, use a different usb/microsd card

Quote from bahtsiz_bedevi

ODL

You mean the problem could be the keyboard is not recognized as keyboard in libreelec?

It is detected as input device keyboard and mouse:

[    5.348070@0] usb 1-1.1: New USB device found, idVendor=09da, idProduct=90c0
[    5.348076@0] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.348081@0] usb 1-1.1: Product: USB Device
[    5.348086@0] usb 1-1.1: Manufacturer: A4TECH
[    5.351380@0] input: A4TECH USB Device as /devices/dwc2_b/usb1/1-1/1-1.1/1-1.1:1.0/0003:09DA:90C0.0003/input/input4
[    5.351819@3] hid-generic 0003:09DA:90C0.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-dwc2_b-1.1/input0
[    5.353524@3] input: A4TECH USB Device as /devices/dwc2_b/usb1/1-1/1-1.1/1-1.1:1.1/0003:09DA:90C0.0004/input/input5
[    5.353794@3] hid-generic 0003:09DA:90C0.0004: input,hidraw3: USB HID v1.11 Mouse [A4TECH USB Device] on usb-dwc2_b-1.1/input1

Quote from zbigzbig20

GDPR-2 , but codesnake already fixed this dvb driver issue for Wetek play 2: WeTek Play 2: Add support for crazycat and hauppauge driver addons by codesnake · Pull Request #2513 · LibreELEC/LibreELEC.tv · GitHub

We know about that. In LE 8.90.5 WP2 dvb driver will be fixed.

afl1 , there will be maybe devel build available with it and latest changes or new build will be released soon?

Quote from afl1

It is detected as input device keyboard and mouse:

Code

[    5.348070@0] usb 1-1.1: New USB device found, idVendor=09da, idProduct=90c0
[    5.348076@0] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.348081@0] usb 1-1.1: Product: USB Device
[    5.348086@0] usb 1-1.1: Manufacturer: A4TECH
[    5.351380@0] input: A4TECH USB Device as /devices/dwc2_b/usb1/1-1/1-1.1/1-1.1:1.0/0003:09DA:90C0.0003/input/input4
[    5.351819@3] hid-generic 0003:09DA:90C0.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-dwc2_b-1.1/input0
[    5.353524@3] input: A4TECH USB Device as /devices/dwc2_b/usb1/1-1/1-1.1/1-1.1:1.1/0003:09DA:90C0.0004/input/input5
[    5.353794@3] hid-generic 0003:09DA:90C0.0004: input,hidraw3: USB HID v1.11 Mouse [A4TECH USB Device] on usb-dwc2_b-1.1/input1

Keyboard doesn't do anything in Kodi. Should I do something in settings to activate the keyboard?

Quote from rosenrot

Could someone tell me what is supported by the S905?

Force RGB output?

444,10bit?

422,10bit?

rgb,10bit?

I tried to get these information from other threads but I can't and my TV does not tell me what it gets.

What are the best settings for the S905?

Display More

To find out what HDMI connected display - Gamma and bit depth capabilities are registered with LE for use:

cat /sys/class/amhdmitx/amhdmitx0/dc_cap

Forced RGB output is not needed unless you are getting Pink or Green screen on old Sony/Philips TV's.

S905 doesn't support 10 bit output. You can decode 10bit H.265 but they will be scaled to 8bit output.

Hi there, the standby feature is working ? The DTB table is update for it or we are still in the dark ?