Recently you asked the same question. Answer still is: copy the .tar and the dtb file into your update folder. Now, use the latest one you have available and wait for 8.90.2.
thanks ,you are right , but in that case librelec hangs during update and i can reach box over lan ssh, not the box hangs during boot,in the principle of boot for exactly and i cant reach it from lan.
thanks ,you are right , but in that case librelec hangs during update and i can reach box over lan ssh, not the box hangs during boot,in the principle of boot for exactly and i cant reach it from lan.
You could access your sd card directly.
yes but both windows and linux mint let me see only one partition with these files,in the photo
yes but both windows and linux mint let me see only one partition with these files,in the photo
Exactly.
From the .tar file you can get the required files.
KERNEL --> kernel.img
KERNEL.md5 --> kernel.img.md5
SYSTEM --> SYSTEM
SYSTEM.md5 --> SYSTEM.md5
dtb.img file is already there.
ah ok now i understand...thanks
i test what you suggest... but nothing,,unfurtuntely, i made another sd to test with the same version of librelec and this boots,may be there is something corrupt in the second partition and the system can't boot?' and is possible to enter secon partion from pc??
thanks
i test what you suggest... but nothing,,unfurtuntely, i made another sd to test with the same version of librelec and this boots,may be there is something corrupt in the second partition and the system can't boot?' and is possible to enter secon partion from pc??
thanks
I can not imagine how it could happen but try also to replace the dtb.img in case something is wrong there. It is strange that there is a dtb.img.dtb file. Except if you copied it there or the auto updater did it.
In linux you should be able to see all partitions from what I can remember. Maybe there is a tool for windows as well.
problaby i copied it on sd than made a copy ad finally renamed, i did not think that it could be a problem to let there that file as a copy with its original name
now i reboot with the new sd and then insert the old sd on an adpter with usb, and now i can see second partition,if i would like to backup all kodi library etc witch folder i have to save? thanks
excuse me but i test now on linux i can see the 2nd partition, i save the folder userdata and copi on a fresh installation, i hope it can be a good idea
Where did you get the link to 8.90.2 build?
Box automatically updated some days ago.
hello ,i have a problem with 8.9.0.1 ,yesterday all ok,today librelec doesn't boot the box remain on the logo before boot librelec,if i remove sd ,box normaly boot? what i can do? without reinstalling librelec from 0?? thanks
Download the tar and replace the files on the SD card
v8.90.2 has much stuttering on 4k WLAN-streaming with my BQEEL S912 Box. Buffer runs out. Streams have max 15000 kbit/s.
Going back to 8.90.1.1 - streams smoothly again.
You can replace advancedsettings to improve this.
Good friends here I tried to upgrade from the version
8.2.2.3 to 8.90.1 plus tvheadend did not establish a connection
I went ahead tried a clean install with version 8.90.1
Same problem tvheadend connects and disconnects
The kszaq version works perfectly here 8.2.2.3
I would like to move on with the most updates I was barred with tvheadend.
Box MECOOL KI Pro S905D
How to solve this problem?
Display MoreGood friends here I tried to upgrade from the version
8.2.2.3 to 8.90.1 plus tvheadend did not establish a connection
I went ahead tried a clean install with version 8.90.1
Same problem tvheadend connects and disconnects
The kszaq version works perfectly here 8.2.2.3
I would like to move on with the most updates I was barred with tvheadend.
Box MECOOL KI Pro S905D
How to solve this problem?
I'm using 8.90.2 with tvheadend, and all is OK!.;)
Please provide a sample file. I think, these are 10 bit H.264 files.
Can't easily provide a sample, but here is the full video report from mediainfo for one of the files. I've removed some duplicate lines:
Video
Count : 342
Count of stream of this kind : 1
Kind of stream : Video
Stream identifier : 0
StreamOrder : 0
ID : 1
Unique ID : 3106936531486395817
Format : AVC
Format/Info : Advanced Video Codec
Commercial name : AVC
Format profile : High@L4
Format settings : CABAC / 4 Ref Frames
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Internet media type : video/H264
Codec : V_MPEG4/ISO/AVC
Codec : AVC
Codec/Info : Advanced Video Codec
Codec profile : High@L4
Codec settings : CABAC / 4 Ref Frames
Codec settings, CABAC : Yes
Codec_Settings_RefFrames : 4
Duration : 2933055.000000
Duration : 48 min 53 s
Bit rate mode : VBR
Bit rate mode : Variable
Bit rate : 9697631
Bit rate : 9 698 kb/s
Maximum bit rate : 15000000
Maximum bit rate : 15.0 Mb/s
Width : 1920
Height : 1080
Stored_Height : 1088
Sampled_Width : 1920
Sampled_Height : 1080
Pixel aspect ratio : 1.000
Display aspect ratio : 1.778
Display aspect ratio : 16:9
Frame rate mode : CFR
Frame rate mode : Constant
Frame rate : 23.976 (24000/1001) FPS
FrameRate_Num : 24000
FrameRate_Den : 1001
Frame count : 70323
Resolution : 8 bits
Colorimetry : 4:2:0
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Interlacement : PPF
Interlacement : Progressive
Bits/(Pixel*Frame) : 0.195
Delay : 0
Delay : 00:00:00.000
Delay, origin : Container
Stream size : 3555460848
Stream size : 3.31 GiB (94%)
Proportion of this stream : 0.93788
Default : Yes
Forced : No
Buffer size : 31250000
Color range : Limited
colour_description_present : Yes
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
I'm using 8.90.2 with tvheadend, and all is OK!.;)
tvheadend HTSP Client Unavailable server
HERE NOT THE SAME!
tvheadend HTSP Client Unavailable server
HERE NOT THE SAME!
Have you tried to update your addon's?
I am also using latest build from GDPR-2 on my play2 + tvheadend from repo (everything updated) and all is ok (tvsat) 
Regards
