It's around 4 MB/s
edit: if i do the other way (copy file from the box to windows) its about 11+ MB/s
Now I attached my wifi stick and the file copy is ~9MB/s
and now I can play 4K HDR content properly
still don't know why my download speed (30 Mbit/s) is so slow on wired connection when my upload is ok (90+ Mbit/s)
maybe the driver has some bug ?
As GDPR-2 is busy with porting S905 to LE master, I decided publish my update. This build fixes LE repository addons version issue by preinstalling them in image.
LibreELEC-S905.arm-8.90.10-K.img.gz
LibreELEC-S905.arm-8.90.10-K.tar
Release notes:
If you have any version issue with addons inputstream.adaptive, inputstream.rtmp, imagedecoder.raw, vfs.rar, pvr.hts, pvr.iptvsimple and pvr.vuplus remove them in /storage/.kodi/addons/ and reboot box.
Now I attached my wifi stick and the file copy is ~9MB/s
and now I can play 4K HDR content properly
still don't know why my download speed (30 Mbit/s) is so slow on wired connection when my upload is ok (90+ Mbit/s)
maybe the driver has some bug ?
could be a bad cable;)
As GDPR-2 is busy with porting S905 to LE master, I decided publish my update. This build fixes LE repository addons version issue by preinstalling them in image.
LibreELEC-S905.arm-8.90.10-K.img.gz
LibreELEC-S905.arm-8.90.10-K.tar
Release notes:
- re-added output_rgb parameter to force RGB mode
- added 9082xs kernel module (thanks to alex for getting it for us)
- fix Wetek Play 2 dvb driver start in default dvb driver addon
- pvr.hts, pvr.iptvsimple and pvr.vuplus2 are preinstalled
- CrazyCat driver addon: added support for Geniatech eyeTv T2 lite
If you have any version issue with addons inputstream.adaptive, inputstream.rtmp, imagedecoder.raw, vfs.rar, pvr.hts, pvr.iptvsimple and pvr.vuplus remove them in /storage/.kodi/addons/ and reboot box.
Just installed this build. inputstream.adaptive, inputstream.rtmp are not available in /storage/.kodi/addons/ but I still get the dependency errors. Deleted imagedecoder.raw, vfs.rar but no change.
Since I updated to your previous build I have buffering issues with several video addons. Either the video stops and the loading circle stucks at 0-3 percent or the video starts to stutter. Moving 10 seconds to the future makes it work several minutes until it freezes again and I can jump again 10s. I do not have a debug log yet but I will keep an eye on it. Don't know if I'm the only one seeing this, then it would be me.
could be a bad cable;)
I don't think so, cable is works fine with my Odroid C2
It's (smb) like an old diesel, it works, but you'l always be driving in the slow lane;)
That's so not true if you have ever driven a remapped diesel like mine then they are anything but slow 😀
I never mentioned that I using Gbit connection
my box (Mecool M8S Pro+) only has a 100 Mbit interface, but that should be enough for all regular 4K content.
My main concern why I got only around 30 Mbit speed ?
The problem is Samba, these CPUs can't handle much, I don't know what theme or add-ons/services you have running in the background but it all adds to the CPU overhead, If you check Kodi stats it's constantly munching 30-40% on a bare install, add CIFS too the mix and it doesn't help, iperf also uses the CPU to generate data, NFS is your real only solution I'm afraid.
As for upload that's because your reading data your not writing it to the buffers, those advancedsettings are too much as well.
If you have any version issue with addons inputstream.adaptive, inputstream.rtmp, imagedecoder.raw, vfs.rar, pvr.hts, pvr.iptvsimple and pvr.vuplus remove them in /storage/.kodi/addons/ and reboot box.
Just installed this build. inputstream.adaptive, inputstream.rtmp are not available in /storage/.kodi/addons/ but I still get the dependency errors. Deleted imagedecoder.raw, vfs.rar but no change.
Same here. Cannot Update these addons, dependency errors.
Amazon VOD is not working at the moment.
On 19.12. should a new version released from sandman which corrects the now-must-send-a-cookie-to-inputstream and streaming-url-has-changed bug.
Thanks adamg for the latest build.
Unfortunately, it appears that hardware decoding is not available. I have hardware acceleration turned on but only software decoding is used.
All, I to am having stuttering issues when streaming uncompressed Blu ray quality video across my network via SMB, ) I have a gigabit lan, source box is a Minimx s905 running Kszaq 8.2.1.2 (RJ45 interface 1gbit), I thought I might try changing to nfs, unfortunately the guide on the Openelec wiki has now been taken down, (this seems to be the go to guide for setting up nfs on Libreelec) can anybody recommend another good source of info. sorry if this is not the correct thread but I have read that some of you guys have switched from SMB to nfs.
Thanks adamg for the latest build.
Unfortunately, it appears that hardware decoding is not available. I have hardware acceleration turned on but only software decoding is used.
Apologies for this I will correct it shortly.
All, I to am having stuttering issues when streaming uncompressed Blu ray quality video across my network via SMB, ) I have a gigabit lan, source box is a Minimx s905 running Kszaq 8.2.1.2 (RJ45 interface 1gbit), I thought I might try changing to nfs, unfortunately the guide on the Openelec wiki has now been taken down, (this seems to be the go to guide for setting up nfs on Libreelec) can anybody recommend another good source of info. sorry if this is not the correct thread but I have read that some of you guys have switched from SMB to nfs.
kszaqs thread would be best if you are using his build, NFS is supported out of the box with LE, you need either a NAS or linux box to run an NFS server.
Can confirm that HW encoding is not working, for any codec.
- Also confirm HW is not working
- Amazon Prime (inputstream?) is not working. I use the NEW Version that Sandman has released today - this version works fine on my ODROID with GDPR-1 s build. I also deleted the addon an reinstalled it. But kodi crashes:
13:24:23.277 T:3742376848 NOTICE: [Amazon VOD] Connect to SignIn Page 5 attempts left
13:24:27.800 T:3742376848 NOTICE: [Amazon VOD] getURL: https://www.amazon.de/gp/deal/ajax/getNotifierResources.html
13:24:28.092 T:3742376848 NOTICE: [Amazon VOD] getURL: https://www.amazon.de/gp/video/streaming/player-token.json?callback=onWebToken_3
13:24:28.341 T:3742376848 NOTICE: [Amazon VOD] Login
13:24:28.431 T:3742376848 NOTICE: [Amazon VOD] Connect to SignIn Page 5 attempts left
13:24:32.732 T:3742376848 NOTICE: [Amazon VOD] getURL: https://atv-ps-eu.amazon.de/cdp/catalog/GetPlaybackResour
13:24:33.088 T:3742376848 NOTICE: [Amazon VOD] Using Host: Cloudfront
13:24:33.089 T:3742376848 NOTICE: [Amazon VOD] checkURL: ..._corrected.mpd
13:24:34.712 T:3742376848 NOTICE: [Amazon VOD] Using inputstream.adaptive Version:2.1.8.11
13:24:34.713 T:3742376848 NOTICE: [Amazon VOD] Checking AudioTrack
13:24:34.810 T:4100379200 NOTICE: VideoPlayer::OpenFile: https://d1l0nb3g075aoz.cloudfront.net/... 46-8a36-ee533c040710_corrected.mpd
13:24:34.812 T:3657384848 NOTICE: Creating InputStream
13:24:37.232 T:3657384848 NOTICE: Creating Demuxer
13:24:37.245 T:3657384848 NOTICE: Opening stream: 1 source: 256
13:24:37.304 T:3657384848 NOTICE: CVideoPlayerVideo::OpenStream - Creating codec: 28
13:24:37.310 T:3657384848 NOTICE: Creating video thread
13:24:37.310 T:3645563792 NOTICE: running thread: video_thread
13:24:37.333 T:3657384848 NOTICE: Opening stream: 18 source: 256
13:24:37.398 T:3657384848 NOTICE: Finding audio codec for: 86057
13:24:37.400 T:3657384848 NOTICE: Creating audio thread
13:24:37.400 T:3624588176 NOTICE: running thread: CVideoPlayerAudio::Process()
13:24:37.520 T:3742376848 NOTICE: [Amazon VOD] Player Starting: 0.0/7015.00048828than it crashes back to main menu.
I just got Tanix TX3 Mini TV Box from Gearbest. It came with different Wi-Fi chip sv6051p. Wi-Fi works with LibreELEC-S905.arm-adamg-1.0.8, remote doesn't work. With LibreELEC-S905.arm-adamg-1.1.0 build Wi-Fi doesn't work, but remote is working.
I just got Tanix TX3 Mini TV Box from Gearbest. It came with different Wi-Fi chip sv6051p. Wi-Fi works with LibreELEC-S905.arm-adamg-1.0.8, remote doesn't work. With LibreELEC-S905.arm-adamg-1.1.0 build Wi-Fi doesn't work, but remote is working.
Thanks for your bug report, I'm uploading a new version now which will fix this.
Because of the the rework some things where changed and wifi drivers was one of them.
- HW decoding is fixed
- Amazon doesn't work: Can anyone confirm that?
