[8.2.3.1] LibreELEC 8.2 for S905/S905X

TheMexx

Don't use 10 bits with an LG. It'll screw up SDR, and won't improve anything in HDR.

I have a B7 too.

Hi guys I know this is the wrong place but please could someone help, I have LE installed on SD card and would like to update the firmware on my box, what do i have to do to boot back up to LE after the firmware update without having to do a clean install thanks.

just plug the card back in, I'm not sure, but if it doesn't boot to Libre, use the pinhole reset method.

Quote from Daz

what do i have to do to boot back up to LE after the firmware update without having to do a clean install thanks.

1. shutdown box

2. remove sd card

3. power on and install firmware update

4. shutdown box and insert sd card again

5. power on - toothpick or another method to enable reboot from sd car

6. reboot from LE

updated 64bit image with some addons built from kszaq 8.2.2.2 git tag to LE – Google Drive

Quote from Nofan Tasi

updated 64bit image with some addons built from kszaq 8.2.2.2 git tag to LE – Google Drive

Hi have added this to S905W and all working good on Kodi 17.6 but cant get my receiver to show Dolby Atmos

soundtrack when playing atmos file Denon AVR-x2300 show multi in + dolby surround?

have set HdMI passthrough and sound settings to 7.1

Thanks guys I'm pretty sure I tried that before and it didn't work but I'll give it a go.

Quote from Daz

Thanks guys I'm pretty sure I tried that before and it didn't work but I'll give it a go.

Install terminal emulator on Android then type "reboot update", your Android will boot to your microSD card and install LibreELEC again. You will not have to do a complete setup again, it just makes your version of LibreELEC bootable again.

Thanks for all the help I'll try all the options I'm sure one of them will work.

so I don't have to put a .dtb and .img or .tar in the update folder?

Quote from sYCO

I get the notice, that a new version is available

after every reboot and auto-update is set to

auto, but nothing happens.

How do I get that update then automatically?

Anyone?

Daz, when you said you wanted to update the firmware, I thought you wanted to update the Android firmware.

If you want to update Libreelec, just do as kszaq says

Quote from sYCO

Anyone?

Did you wait until the download was finished before rebooting?

Quote from 2re

Did you wait until the download was finished before rebooting?

I gave my box enough time to download, but it didn't update on next boot, so I updated it manually

Yes I want to flash the boxes android version with a much newer version and then go back to using LE.

Then all you need to do, is remove the sd card with libreelec, flash android, then put sd card back & reboot.

if libreelec is already on the card & boots normally, what makes you think you need to do anything else?

with libreelec on the card, it is totally independent from android

ello. I have KII Pro (s905) with latest kszaq´s libreelec (8.2.2.2).HTS Tvheadend 4.2.5 ~ LibreELEC Tvh-addon v8.2.113.

In live TV there is every 5 - 8 minutes small lag (artefacts and sound distortion) for 1 - 2 seconds. I use dvb-s tuner.

Does anybody has similar issue?

afl1 writes in previous posts: "

For Tvheaden42 set following options:

- for every standard Maximum PIDs: 26

- Configuration ->Channel/EPG->EPG Grabber Modules->Over-the-Air: EIT: DVB Grabber->Enabled"

but I´m not sure if this has something to do with my problem (I didn´t set it yet)