Overheating may be an issue if you set both CPU and GPU to stick at highest operating frequency.
Yes, if your box has cheep cooling, you should be careful.
Or you can(se imge) 
[8.2.3.1] LibreELEC 8.2 for S905/S905X
-
kszaq -
July 19, 2017 at 9:33 PM -
Thread is Unresolved
-
-
updated 64bit image with some addons built from kszaq 8.2.1.1 git tag to LE – Google Drive
-
Yes, .tar is enough.
Thank you, update done.
-
I just wanted to say that I get a BT.2020 signal on every 4K file, even if they're only 709. Someone mentioned having the same problem a while back, can't remember who.
It's weird because it used to work, but I haven't checked in a while and it broke sometime in the past moths. Anyone else affected?
-
updated 64bit image with some addons built from kszaq 8.2.1.1 git tag to LE – Google Drive
Thank you for sharing. I am having trouble to compile LE image from KSZAQ github repo. I get loads of error when Libcec sources being compiled. Has anyone else experiences such problem?
P.S. iam on LinuxMint 18.2
-
Thank you for sharing. I am having trouble to compile LE image from KSZAQ github repo. I get loads of error when Libcec sources being compiled. Has anyone else experiences such problem?
P.S. iam on LinuxMint 18.2
to compile libcec
in src/libcec/cmake/SetBuildInfo.cmake
I comment out parts
# add git revision to compile info
# add host on which this was built to compile info
I am on Ubuntu 'artful' chroot inside up-to-date gentoo and I need to adjust a few more minor things.
But that's because of my specific, somewhat deviating, setup.
-
Hi guys
I'm running into problems to make network connection work, cable or wireless. Both method keeps waiting dhcp forever (I've tested it in two different network with different params ie netmask and so). Stactic config, also, doesn't connect. The player I'm using is from Hungsung, 1G/8G/S905. All the other peripheals seems to work fine. I've tested all the dtb files avaialable at Index of /s905/8.2/device_trees/S905.
Please could you give some advice on how to test it further?
Also wireless is able to detect available networks and cable shows correctly when I plug or unplug rj45 connector.
-
What about using USB-LAN adapter, even just for testing purposes?
-
What about using USB-LAN adapter, even just for testing purposes?
Good point
, I will give it a try later -
Thanks, very good job.
I had a KII PRO stored in a drawer because it was blocked all the time with Android and I could not use it.
With Libreelec it works perfect, I am more than happy.
Thank you, thank you and thank you.
-
Hi guys
I'm running into problems to make network connection work, cable or wireless. Both method keeps waiting dhcp forever (I've tested it in two different network with different params ie netmask and so). Stactic config, also, doesn't connect. The player I'm using is from Hungsung, 1G/8G/S905. All the other peripheals seems to work fine. I've tested all the dtb files avaialable at Index of /s905/8.2/device_trees/S905.
Please could you give some advice on how to test it further?
Also wireless is able to detect available networks and cable shows correctly when I plug or unplug rj45 connector.
Have you tried setting a static IP address to see if it's just a DHCP problem? If that works, maybe you can try to reserve the IP adderss in the DHCP server.
-
Compiled build for AP6335 wifi drivers only(ADDITIONAL_DRIVERS="gpu-aml ap6xxx-aml")
For some reasons I can only play HEVC movies with plex plugin upto 7 mb bitrate quality. Over 8000 10bit videos play in slow motion.
-
What about using USB-LAN adapter, even just for testing purposes?
Or even using a static IP address ?Just re-read your post and see you've already tried -
Hello
I installed this version on my gt1 ultimate (I also tried another version 8.9 / 9.)
and I have a pb to access my NAS in SMB (popcorn a400)
there is a login and password to access the NAS
except kodi, do not recognize any password, even if I configure kodi in SMB1
can you help me please
-
Have you tried setting a static IP address to see if it's just a DHCP problem? If that works, maybe you can try to reserve the IP adderss in the DHCP server.
Selectaa static config already test it. Doesn't work
-
Display More
Hello
I installed this version on my gt1 ultimate (I also tried another version 8.9 / 9.)
and I have a pb to access my NAS in SMB (popcorn a400)
there is a login and password to access the NAS
except kodi, do not recognize any password, even if I configure kodi in SMB1
can you help me please
This thread is for s905 chipsets, not s912. You are in wrong forum.
-
Hi, I just installed this on my A95X. Everything is working without issue except for some reason, when I try to install 'RTMP Input' and 'InputStream Adaptive' video player InputStream addons, I get "Installation Failed". It wasn't a problem on previous builds. Any ideas?
-
Les
This thread is for s905 chipsets, not s912. You are in wrong forum.
Hello
yes, I understand, but my pb is common to all versions, and so far I have not had answers on several forums
