The standard setting is 444, 8bit - not 420.
YCbCr 4:2:0 is not officially supported by the HDMI standard (except for 2160p50 and 2160p60).
However, it might still work in some cases.
If i boot my box without autostart.sh, my AVR say's 420 8 bit. But just to be sure, i'll check it again later on. 
I see the same behavior on my 10bit Hisense TV when switching to 4K as well - just have to calibrate the TV when in 4K mode.
why not leave it in 4k all the time? 
If i boot my box without autostart.sh, my AVR say's 420 8 bit. But just to be sure, i'll check it again later on.
If the GUI is set up to 2160p50 or 2160p60 then it will be 420, sure.
For everything else it will be 444.
Yesterday I tried to watch a BD movie with a DTS HD HRA audio track, but I cannot get audio with the latest LE versions (8.1.7, 8.1.8) .
No luck with LE 7 either. My AVR says nothing and no sound, Other DTS and DD tracks are working.
Could you check this file (I cut about the first 200 MB) here: DTSHD_HRA.m2ts ?
Is it a bug or just a corrupted file?
dmesg after I try to play it:
[ 265.043700@0] remote: press ircode = 0x09,
[ 265.043730@0] remote: scancode = 0x0080,maptable = 0,code:0xf6097f80
[ 265.043745@0]
[ 265.112497@0] codec:DisableVideoLayer()
[ 265.128425@0] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0
[ 265.128444@0] di_receiver_event_fun: vf_notify_receiver unreg
[ 265.128477@2] DI: di_unreg_process unreg start 1.
[ 265.128502@2] codec:DisableVideoLayer()
[ 265.128512@2] codec:disbled keep video before free keep buffer.
[ 265.128521@2] codec:disbled video for next before free keep buffer!
[ 265.128531@2] codec:DisableVideoLayer()
[ 265.128542@2] codec:free_alloced_keep_buffer (null). (null). (null)
[ 265.128554@2] codec:free_alloced_keep_buffer (null). (null). (null)
[ 265.128565@2] [tsync_avevent]event:2, param 0
[ 265.128577@2] codec:video first pts = 0
[ 265.128600@2] DI: di_unreg_process vf unreg cost 0 ms.
[ 265.128610@2] DI: di_unreg_process unreg stop 0.
[ 265.141741@3] codec:vdec1 video changed to 0 x 0 0 fps clk->200MHZ
[ 265.142291@3] codec:video_disable_store(1)
[ 265.142313@3] codec:DisableVideoLayer()
[ 265.142326@3] codec:free_alloced_keep_buffer (null). (null). (null)
[ 265.142409@3] vfm_map_store:rm default
[ 265.142476@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[ 265.143499@0] codec:VsyncDisableVideoLayer
[ 265.143524@0] codec:AFBC off now.
[ 265.158097@0] remote: release ircode = 0x09,
[ 265.158119@0] remote: scancode = 0x0080, maptable = 0,code:0x00000000
[ 265.158134@0]
[ 265.269815@0] aml_spdif_dai: aiu 958 playback disable
[ 265.269905@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=192000, runtime->channels=8, same source mode(0)
[ 265.269935@0] aml_spdif_dai: set 4x audio clk for 958
[ 265.269945@0] aml_audio_hw: IEC958 16bit
[ 265.269952@0] hdmitx: audio: aout notify rate 192000
[ 265.269956@0] hdmitx: audio: aout notify size 16
[ 265.269960@0] hdmitx: audio: no update
[ 265.270385@0] audio_dsp: buf=0
[ 265.270394@0] audio_dsp: IEC958_mode_raw=0
[ 265.270423@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[ 265.270428@0] audio_dsp: last mode 8,now 0
[ 265.276683@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 265.276729@0] aml_spdif_dai: share the same clock
[ 265.276739@0] aml_audio_hw: IEC958 PCM32
[ 265.276746@0] hdmitx: audio: aout notify rate 44100
[ 265.276750@0] hdmitx: audio: aout notify size 32
[ 265.276755@0] hdmitx: audio: aout notify format CT_PCM
[ 265.276760@0] hdmtix: set audio
[ 265.276774@0] hdmitx tx_aud_src = 0
[ 265.276802@0] hdmitx: fs = 2, cd = 4, tmds_clk = 296703
[ 265.276806@0] hdmitx aud_n_para = 4459
[ 265.276826@0] hdmitx set channel status
[ 265.276892@0] hdmitx: audio: Audio Type: PCM
[ 265.276896@0] hdmitx: audio: set audio param
[ 265.276906@0] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[ 265.277072@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 265.277078@0] aml_spdif_dai: share the same clock
[ 265.277086@0] aml_audio_hw: IEC958 PCM32
[ 265.277091@0] hdmitx: audio: aout notify rate 44100
[ 265.277094@0] hdmitx: audio: aout notify size 32
[ 265.277098@0] hdmitx: audio: no update
[ 265.277104@0] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[ 265.277229@0] channel count should be 8, we got 2 aborting
[ 265.281126@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 265.281139@1] aml_spdif_dai: share the same clock
[ 265.281150@1] aml_audio_hw: IEC958 PCM32
[ 265.281157@1] hdmitx: audio: aout notify rate 44100
[ 265.281162@1] hdmitx: audio: aout notify size 32
[ 265.281166@1] hdmitx: audio: no update
[ 265.281176@1] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[ 265.282105@1] hdmitx: set frac_rate_policy as 0
[ 265.282135@1] vout_serve: vmode set to 2160p60hz420
[ 265.282159@1] vout_serve: disable HDMI PHY as soon as possible
[ 265.282167@1] fb: current vmode=2160p24hz, cmd: 0x50000
[ 265.282176@1] tv_vout: tv_set_current_vmode[919]fps_target_mode=33
[ 265.282185@1] tv_vout: mode is 33,sync_duration_den=1,sync_duration_num=60
[ 265.282199@1] tv_vout: 3tvinfo 33 not find
[ 265.282203@1] tv_vout: new mode =2160p60hz420 set ok
[ 265.282207@1] vout_serve: vinfo mode is: 2160p60hz420
[ 265.282211@1] vout_serve: new mode 2160p60hz420 set ok
[ 265.282230@1] hdmitx: video: get current mode: 2160p60hz420
[ 265.282234@1] hdmitx: update rx hdr info 0
[ 265.282238@1] hdmitx: update physcial size: 1280 720
[ 265.282283@1] hdmitx: system: already init VIC = 0 Now VIC = 353
[ 265.282289@1] hdmitx: rx no SCDC present indicator
[ 265.284301@1] hdmitx: ddc rd8b error 0x54 0x01
[ 265.286315@1] hdmitx: ddc rd8b error 0x54 0x01
[ 265.286322@1] hdmirx version is 1.4 or below
[ 265.286327@1] hdmitx div40: 0
[ 265.308092@1] hdmitx: system: set mode VIC 353 (cd0,cs0,pm1,vd0,1)
[ 265.308102@1] hdmitx: system: set pll
[ 265.308106@1] hdmitx: system: param->VIC:353
[ 265.308111@1] hdmitx: set clk: VIC = 353 cd = 4 frac_rate = 0
[ 265.308123@1] config HPLL = 5940000
[ 265.308147@1] HPLL: 0xc000027b
[ 265.308150@1] config HPLL done
[ 265.308160@1] set_hpll_od3_clk_div[437] div = 6
[ 265.308169@1] j = 8 vid_clk_div = 1
[ 265.308180@1] hdmitx: set enc for VIC: 353
[ 265.308199@1] hdmitx_set_hw[4941] set VIC = 353
[ 265.308389@0] hdmitx: system: irq 80000001
[ 265.308408@0] Start = 0x10000100 End = 0x100001ff
[ 265.308420@0] [0x10000104]: 0x00000001
[ 265.308656@0] [0x10000180]: 0x000000ff
[ 265.308661@0] [0x10000181]: 0x000000ff
[ 265.308667@0] [0x10000182]: 0x00000003
[ 265.308672@0] [0x10000183]: 0x00000007
[ 265.308677@0] [0x10000184]: 0x0000003f
[ 265.308682@0] [0x10000185]: 0x00000002
[ 265.308689@0] [0x10000187]: 0x000000ff
[ 265.308694@0] [0x10000188]: 0x00000003
[ 265.320072@1] hdmitx: ddc w1b error 0x54 0x20 0x00
[ 265.322088@1] hdmitx: ddc w1b error 0x54 0x20 0x00
[ 265.324100@1] hdmitx: ddc rd8b error 0x54 0x21
[ 265.440090@1] hdmitx: system: PHY Setting Done
[ 265.444136@1] Sink is HDMI device
[ 265.444154@1] hdmitx: system: packet: can't get vendor data
[ 265.444161@1] 2160p60hz420 60 1
[ 265.444168@1] 2160p60hz420 60 1
[ 265.444172@1] hdmtix: set audio
[ 265.444184@1] hdmitx tx_aud_src = 0
[ 265.444212@1] hdmitx: fs = 2, cd = 4, tmds_clk = 594000
[ 265.444217@1] hdmitx aud_n_para = 9408
[ 265.444237@1] hdmitx set channel status
[ 265.444298@1] hdmitx: audio: Audio Type: PCM
[ 265.444305@1] fb: current vmode=2160p60hz420, cmd: 0x10000
[ 265.458293@1] fb: osd[0] canvas.idx =0x40
[ 265.458296@1] fb: osd[0] canvas.addr=0x7d100000
[ 265.458298@1] fb: osd[0] canvas.width=15360
[ 265.458300@1] fb: osd[0] canvas.height=2160
[ 265.458301@1] fb: osd[0] frame.width=3840
[ 265.458303@1] fb: osd[0] frame.height=2160
[ 265.513813@0] fb: osd[0] canvas.idx =0x40
[ 265.513815@0] fb: osd[0] canvas.addr=0x7d100000
[ 265.513818@0] fb: osd[0] canvas.width=7680
[ 265.513819@0] fb: osd[0] canvas.height=2160
[ 265.513820@0] fb: osd[0] frame.width=1920
[ 265.513822@0] fb: osd[0] frame.height=1080
[ 265.525160@0] fb: osd[0] enable: 1 (kodi.bin)
[ 267.200864@1] audio_dsp: buf=0
[ 267.200878@1] audio_dsp: IEC958_mode_raw=0
[ 267.200914@1] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[ 267.200919@1] audio_dsp: last mode 0,now 0
[ 267.207579@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 267.207592@1] aml_spdif_dai: share the same clock
[ 267.207602@1] aml_audio_hw: IEC958 PCM32
[ 267.207609@1] hdmitx: audio: aout notify rate 44100
[ 267.207614@1] hdmitx: audio: aout notify size 32
[ 267.207618@1] hdmitx: audio: no update
[ 267.207629@1] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[ 267.207778@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 267.207785@2] aml_spdif_dai: share the same clock
[ 267.207794@2] aml_audio_hw: IEC958 PCM32
[ 267.207799@2] hdmitx: audio: aout notify rate 44100
[ 267.207804@2] hdmitx: audio: aout notify size 32
[ 267.207807@2] hdmitx: audio: no update
[ 267.207815@2] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[ 267.207951@2] channel count should be 8, we got 2 abortingI've downloaded that file and everything is fine, no issue, my AVR showed DTS-HD HR and the sound was perfect, LE 8.1.8.
Yesterday I tried to watch a BD movie with a DTS HD HRA audio track, but I cannot get audio with the latest LE version (81.7, 8.1.8) .
No luck with LE 7 either. My AVR says nothing and no sound, Other DTS and DD tracks are working.
Could you check this file (I cut about the first 200 MB) here: DTSHD_HRA.m2ts ?
Is it a bug or just a corrupted file?
Yesterday I tried to watch a BD movie with a DTS HD HRA audio track, but I cannot get audio with the latest LE versions (8.1.7, 8.1.8) .
No luck with LE 7 either. My AVR says nothing and no sound, Other DTS and DD tracks are working.
Could you check this file (I cut about the first 200 MB) here: DTSHD_HRA.m2ts ?
Is it a bug or just a corrupted file?
dmesg after I try to play it:Code[ 265.043700@0] remote: press ircode = 0x09, [ 265.043730@0] remote: scancode = 0x0080,maptable = 0,code:0xf6097f80 [ 265.043745@0] [ 265.112497@0] codec:DisableVideoLayer() [ 265.128425@0] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0 [ 265.128444@0] di_receiver_event_fun: vf_notify_receiver unreg [ 265.128477@2] DI: di_unreg_process unreg start 1. [ 265.128502@2] codec:DisableVideoLayer() [ 265.128512@2] codec:disbled keep video before free keep buffer. [ 265.128521@2] codec:disbled video for next before free keep buffer! [ 265.128531@2] codec:DisableVideoLayer() [ 265.128542@2] codec:free_alloced_keep_buffer (null). (null). (null) [ 265.128554@2] codec:free_alloced_keep_buffer (null). (null). (null) [ 265.128565@2] [tsync_avevent]event:2, param 0 [ 265.128577@2] codec:video first pts = 0 [ 265.128600@2] DI: di_unreg_process vf unreg cost 0 ms. [ 265.128610@2] DI: di_unreg_process unreg stop 0. [ 265.141741@3] codec:vdec1 video changed to 0 x 0 0 fps clk->200MHZ [ 265.142291@3] codec:video_disable_store(1) [ 265.142313@3] codec:DisableVideoLayer() [ 265.142326@3] codec:free_alloced_keep_buffer (null). (null). (null) [ 265.142409@3] vfm_map_store:rm default [ 265.142476@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo [ 265.143499@0] codec:VsyncDisableVideoLayer [ 265.143524@0] codec:AFBC off now. [ 265.158097@0] remote: release ircode = 0x09, [ 265.158119@0] remote: scancode = 0x0080, maptable = 0,code:0x00000000 [ 265.158134@0] [ 265.269815@0] aml_spdif_dai: aiu 958 playback disable [ 265.269905@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=192000, runtime->channels=8, same source mode(0) [ 265.269935@0] aml_spdif_dai: set 4x audio clk for 958 [ 265.269945@0] aml_audio_hw: IEC958 16bit [ 265.269952@0] hdmitx: audio: aout notify rate 192000 [ 265.269956@0] hdmitx: audio: aout notify size 16 [ 265.269960@0] hdmitx: audio: no update [ 265.270385@0] audio_dsp: buf=0 [ 265.270394@0] audio_dsp: IEC958_mode_raw=0 [ 265.270423@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM [ 265.270428@0] audio_dsp: last mode 8,now 0 [ 265.276683@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 265.276729@0] aml_spdif_dai: share the same clock [ 265.276739@0] aml_audio_hw: IEC958 PCM32 [ 265.276746@0] hdmitx: audio: aout notify rate 44100 [ 265.276750@0] hdmitx: audio: aout notify size 32 [ 265.276755@0] hdmitx: audio: aout notify format CT_PCM [ 265.276760@0] hdmtix: set audio [ 265.276774@0] hdmitx tx_aud_src = 0 [ 265.276802@0] hdmitx: fs = 2, cd = 4, tmds_clk = 296703 [ 265.276806@0] hdmitx aud_n_para = 4459 [ 265.276826@0] hdmitx set channel status [ 265.276892@0] hdmitx: audio: Audio Type: PCM [ 265.276896@0] hdmitx: audio: set audio param [ 265.276906@0] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source [ 265.277072@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 265.277078@0] aml_spdif_dai: share the same clock [ 265.277086@0] aml_audio_hw: IEC958 PCM32 [ 265.277091@0] hdmitx: audio: aout notify rate 44100 [ 265.277094@0] hdmitx: audio: aout notify size 32 [ 265.277098@0] hdmitx: audio: no update [ 265.277104@0] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source [ 265.277229@0] channel count should be 8, we got 2 aborting [ 265.281126@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 265.281139@1] aml_spdif_dai: share the same clock [ 265.281150@1] aml_audio_hw: IEC958 PCM32 [ 265.281157@1] hdmitx: audio: aout notify rate 44100 [ 265.281162@1] hdmitx: audio: aout notify size 32 [ 265.281166@1] hdmitx: audio: no update [ 265.281176@1] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source [ 265.282105@1] hdmitx: set frac_rate_policy as 0 [ 265.282135@1] vout_serve: vmode set to 2160p60hz420 [ 265.282159@1] vout_serve: disable HDMI PHY as soon as possible [ 265.282167@1] fb: current vmode=2160p24hz, cmd: 0x50000 [ 265.282176@1] tv_vout: tv_set_current_vmode[919]fps_target_mode=33 [ 265.282185@1] tv_vout: mode is 33,sync_duration_den=1,sync_duration_num=60 [ 265.282199@1] tv_vout: 3tvinfo 33 not find [ 265.282203@1] tv_vout: new mode =2160p60hz420 set ok [ 265.282207@1] vout_serve: vinfo mode is: 2160p60hz420 [ 265.282211@1] vout_serve: new mode 2160p60hz420 set ok [ 265.282230@1] hdmitx: video: get current mode: 2160p60hz420 [ 265.282234@1] hdmitx: update rx hdr info 0 [ 265.282238@1] hdmitx: update physcial size: 1280 720 [ 265.282283@1] hdmitx: system: already init VIC = 0 Now VIC = 353 [ 265.282289@1] hdmitx: rx no SCDC present indicator [ 265.284301@1] hdmitx: ddc rd8b error 0x54 0x01 [ 265.286315@1] hdmitx: ddc rd8b error 0x54 0x01 [ 265.286322@1] hdmirx version is 1.4 or below [ 265.286327@1] hdmitx div40: 0 [ 265.308092@1] hdmitx: system: set mode VIC 353 (cd0,cs0,pm1,vd0,1) [ 265.308102@1] hdmitx: system: set pll [ 265.308106@1] hdmitx: system: param->VIC:353 [ 265.308111@1] hdmitx: set clk: VIC = 353 cd = 4 frac_rate = 0 [ 265.308123@1] config HPLL = 5940000 [ 265.308147@1] HPLL: 0xc000027b [ 265.308150@1] config HPLL done [ 265.308160@1] set_hpll_od3_clk_div[437] div = 6 [ 265.308169@1] j = 8 vid_clk_div = 1 [ 265.308180@1] hdmitx: set enc for VIC: 353 [ 265.308199@1] hdmitx_set_hw[4941] set VIC = 353 [ 265.308389@0] hdmitx: system: irq 80000001 [ 265.308408@0] Start = 0x10000100 End = 0x100001ff [ 265.308420@0] [0x10000104]: 0x00000001 [ 265.308656@0] [0x10000180]: 0x000000ff [ 265.308661@0] [0x10000181]: 0x000000ff [ 265.308667@0] [0x10000182]: 0x00000003 [ 265.308672@0] [0x10000183]: 0x00000007 [ 265.308677@0] [0x10000184]: 0x0000003f [ 265.308682@0] [0x10000185]: 0x00000002 [ 265.308689@0] [0x10000187]: 0x000000ff [ 265.308694@0] [0x10000188]: 0x00000003 [ 265.320072@1] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 265.322088@1] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 265.324100@1] hdmitx: ddc rd8b error 0x54 0x21 [ 265.440090@1] hdmitx: system: PHY Setting Done [ 265.444136@1] Sink is HDMI device [ 265.444154@1] hdmitx: system: packet: can't get vendor data [ 265.444161@1] 2160p60hz420 60 1 [ 265.444168@1] 2160p60hz420 60 1 [ 265.444172@1] hdmtix: set audio [ 265.444184@1] hdmitx tx_aud_src = 0 [ 265.444212@1] hdmitx: fs = 2, cd = 4, tmds_clk = 594000 [ 265.444217@1] hdmitx aud_n_para = 9408 [ 265.444237@1] hdmitx set channel status [ 265.444298@1] hdmitx: audio: Audio Type: PCM [ 265.444305@1] fb: current vmode=2160p60hz420, cmd: 0x10000 [ 265.458293@1] fb: osd[0] canvas.idx =0x40 [ 265.458296@1] fb: osd[0] canvas.addr=0x7d100000 [ 265.458298@1] fb: osd[0] canvas.width=15360 [ 265.458300@1] fb: osd[0] canvas.height=2160 [ 265.458301@1] fb: osd[0] frame.width=3840 [ 265.458303@1] fb: osd[0] frame.height=2160 [ 265.513813@0] fb: osd[0] canvas.idx =0x40 [ 265.513815@0] fb: osd[0] canvas.addr=0x7d100000 [ 265.513818@0] fb: osd[0] canvas.width=7680 [ 265.513819@0] fb: osd[0] canvas.height=2160 [ 265.513820@0] fb: osd[0] frame.width=1920 [ 265.513822@0] fb: osd[0] frame.height=1080 [ 265.525160@0] fb: osd[0] enable: 1 (kodi.bin) [ 267.200864@1] audio_dsp: buf=0 [ 267.200878@1] audio_dsp: IEC958_mode_raw=0 [ 267.200914@1] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM [ 267.200919@1] audio_dsp: last mode 0,now 0 [ 267.207579@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 267.207592@1] aml_spdif_dai: share the same clock [ 267.207602@1] aml_audio_hw: IEC958 PCM32 [ 267.207609@1] hdmitx: audio: aout notify rate 44100 [ 267.207614@1] hdmitx: audio: aout notify size 32 [ 267.207618@1] hdmitx: audio: no update [ 267.207629@1] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source [ 267.207778@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 267.207785@2] aml_spdif_dai: share the same clock [ 267.207794@2] aml_audio_hw: IEC958 PCM32 [ 267.207799@2] hdmitx: audio: aout notify rate 44100 [ 267.207804@2] hdmitx: audio: aout notify size 32 [ 267.207807@2] hdmitx: audio: no update [ 267.207815@2] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source [ 267.207951@2] channel count should be 8, we got 2 aborting
Same problem here. Earlier today i noticed that all my DTS-HR didn't play, thought it was a bug in the latest AVR firmware that was released a couple of day's ago. But now I'm not so sure.
If the GUI is set up to 2160p50 or 2160p60 then it will be 420, sure.
For everything else it will be 444.
My Bad 
Hi,
I'd like to ask the developers if it would be possible to make the .dff .dfs files (SACD) reproduction work on the s905x devices.
On Kodi that runs on x86 those files work perfectly.
Any chance?
Also, any chance to do not see the dithering (24bit-->16bit) on the Hi-Res Flac audio files?
Thanks a lot.
I'd like to ask the developers if it would be possible to make the .dff .dfs files (SACD) reproduction work on the s905x devices.
On Kodi that runs on x86 those files work perfectly.Any chance?
Separate thread, log, samples - any chance?
Same problem here. Earlier today i noticed that all my DTS-HR didn't play, thought it was a bug in the latest AVR firmware that was released a couple of day's ago. But now I'm not so sure.
Yes, same here. I've checked all the other DTS HR files and none of them plays. Strange. Last time I checked everything was OK.
Same problem here. Earlier today i noticed that all my DTS-HR didn't play, thought it was a bug in the latest AVR firmware that was released a couple of day's ago. But now I'm not so sure.
I also had problems with DTS-HRA and my Denon AVR, and discussed it here with the Kodi people: DTS-High Resolution. What's the score?
Denon claims that HRA plays fine from blueray players in their tests, kodi developers claim they follow the standard and point to their code as proof. I use an older firmware, that plays the HD-HRA stream, but this is limited to 5.1 for whatever reason. Newer firmwares fall back to the DTS core.
I see the same behavior on my 10bit Hisense TV when switching to 4K as well - just have to calibrate the TV when in 4K mode.
Did you change ONLY saturation on you tv or can you suggest me others changes?
I also had problems with DTS-HRA and my Denon AVR, and discussed it here with the Kodi people: DTS-High Resolution. What's the score?
Denon claims that HRA plays fine from blueray players in their tests, kodi developers claim they follow the standard and point to their code as proof. I use an older firmware, that plays the HD-HRA stream, but this is limited to 5.1 for whatever reason. Newer firmwares fall back to the DTS core.
Strange, I also have Denon AVR (X3100W) and no issue with DTS-HD HRA, latest firmware (updated 2 months ago).
DS-1 Settings -> System -> Power saving and there you can choose the shutdown function. Either Shutdown, which is default, or Suspend.
If you set it to suspend your box will suspend when you push the power button on your remote.
Did you change ONLY saturation on you tv or can you suggest me others changes?
That would be different from TV to TV, but basically i prefer:
Backlight: 13 (max = 20)
Brightness: 36%
Contrast: 91%
Sharpness: 11%
Color: 38%
Tint(G/R): 58/42
Gama: Default
Color tone: Standard
All filters and enhancements Off
Custom Whitebalance
Custom Color settings for Red Green Blue Yellow Cyan and Magenta
nie było mnie trochę, potrzebuje oprogramowania pod mój 905X, jakieś namiary, proszę
Hey guys, maybe someone around here can shed some light on this.
Since I modded my box to suspend/sleep, when it wakes up, the weather (yahoo) stays blank for a while. Is there an add-on
that can force refresh it?
Everything else works great!
Great job, congratulations ....
I had LE in ODROID-C2 and everything worked, now I have a Mecool KI Pro with LE 8.0.2c and everything working, when I installed LE 8.1.7 (.tar) did not find wired network, wireless works perfect. I formatted SD and installed with .img, same problem. Reboot to Android and finds wired network, I go back to LE 8.0.2 finds wired network
I have now installed 8.1.8 for both .tar and .img and can not find wired network
Follows logging with disable and enable wired network and wireless network
