[9.0.0] LibreELEC builds for MX2/G18

qUE-ARM · November 6, 2019 at 8:50 PM

For those having trouble with the NAND b0rk/120 seconds message, although it's a bit technical I've managed to fix this issue on my box, maybe temporarily but it's working again.

Amlogic AML8726-MX HD18 v2.22 (G18ref) STB black screen no boot fix

KOPRajs, really appreciate the backporting of LibreElec. Only issue I've had is I assume my old JVC flatscreen TV doesn't like the video mode the Matricom splash uses, the display won't fire up, but I've manage to work out an order to boot the box with cables unattached until in Kodi.

EBAL · November 13, 2019 at 4:28 AM

Quote from crackulator

I installed to SDCARD and am running 20190424 without issue.

Are you running 20190424 from internal NAND? If so, how did you manage to make this version work in NAND?

I also updated from 20190226 to 20190424 and it broke my box. So I had to reinstall 8.0.2, updated to 20190226 and it's working from NAND at the moment.

buzzmarshall · November 13, 2019 at 3:29 PM

Boxes are just old so i don't really bother playing with them anymore, but i did update one to Kodi 18.4 on the weekend for a friend and then remembered what i had done to make them still usable...

If the box is a Maticom box then its their bootloader that is more then likely causing the issue, tho some did have crappy nands that were known to go bad but in most cases i have come across it was Matricom's crappy bootloader that would easily corrupt when messing with it and the video setup in it was for older resolutions which some screens don't pickup till the main firmware comes up (Android)...

I forgot that i had replaced their bootloader with my own along time ago which is why i was able to keep the system updated to begin with...

Phthalocyanine · November 18, 2019 at 3:10 AM

I have a DigiXstream DX3 - AML8726-MX, for which I am trying to install the recent libreelec builds here but am having problems. When I try the recovery method (fresh install) the installation stalls out at the Kodi screen. Like one of the previous posters (#289) I can successfully load that ancient version of OpenELEC, but when I try to update with the tar file, it begins to update and then runs into an error and kills the box. I have been able to recover by re-installing the ancient version of OpenELEC.

I have tried both with the storage SD/USB method and also changing the setting for internal Nand storage to have LIBREELEC_DISK.

On my storage USB, I found two log files of my attempts to install 8.0.2. The longer of the two is pasted below. There seems to be a problem with loading skin settings towards the end. Can anyone help me figure out what is going wrong?

Many thanks!

***

00:00:12.742 T:3036101248 NOTICE: special://profile/ is mapped to: special://masterprofile/

00:00:12.743 T:3036101248 NOTICE: -----------------------------------------------------------------------

00:00:12.743 T:3036101248 NOTICE: Starting Kodi (17.3 Git:147cec4). Platform: Linux ARM 32-bit

00:00:12.743 T:3036101248 NOTICE: Using Release Kodi x32 build

00:00:12.743 T:3036101248 NOTICE: Kodi compiled May 30 2017 by GCC 6.2.0 for Linux ARM 32-bit version 3.10.99 (199267)

00:00:12.743 T:3036101248 NOTICE: Running on LibreELEC (community) - Version: 8.0.2, kernel: Linux ARM 32-bit version 3.10.99

00:00:12.743 T:3036101248 NOTICE: FFmpeg version/source: ffmpeg-3.1-kodi

00:00:12.743 T:3036101248 NOTICE: Host CPU: ARMv7 Processor rev 0 (v7l), 2 cores available

00:00:12.744 T:3036101248 NOTICE: ARM Features: Neon enabled

00:00:12.744 T:3036101248 NOTICE: special://xbmc/ is mapped to: /usr/share/kodi/

00:00:12.744 T:3036101248 NOTICE: special://xbmcbin/ is mapped to: /usr/lib/kodi

00:00:12.744 T:3036101248 NOTICE: special://xbmcbinaddons/ is mapped to: /usr/lib/kodi/addons

00:00:12.744 T:3036101248 NOTICE: special://masterprofile/ is mapped to: /storage/.kodi/userdata

00:00:12.744 T:3036101248 NOTICE: special://envhome/ is mapped to: /storage

00:00:12.744 T:3036101248 NOTICE: special://home/ is mapped to: /storage/.kodi

00:00:12.744 T:3036101248 NOTICE: special://temp/ is mapped to: /storage/.kodi/temp

00:00:12.744 T:3036101248 NOTICE: special://logpath/ is mapped to: /storage/.kodi/temp

00:00:12.744 T:3036101248 NOTICE: The executable running is: /usr/lib/kodi/kodi.bin

00:00:12.745 T:3036101248 NOTICE: Local hostname: LibreELEC

00:00:12.745 T:3036101248 NOTICE: Log File is located: /storage/.kodi/temp//kodi.log

00:00:12.745 T:3036101248 NOTICE: -----------------------------------------------------------------------

00:00:12.981 T:3036101248 ERROR: DBus: Error org.freedesktop.DBus.Error.ServiceUnknown - The name org.freedesktop.UPower was not provided by any .service files

00:00:12.994 T:3036101248 NOTICE: load settings...

00:00:12.995 T:3036101248 NOTICE: AML device detected

00:00:13.132 T:3036101248 NOTICE: Found 2 Lists of Devices

00:00:13.132 T:3036101248 NOTICE: Enumerated ALSA devices:

00:00:13.132 T:3036101248 NOTICE: Device 1

00:00:13.133 T:3036101248 NOTICE: m_deviceName : default

00:00:13.133 T:3036101248 NOTICE: m_displayName : Default (AML-DUMMY-CODEC S/PDIF)

00:00:13.133 T:3036101248 NOTICE: m_displayNameExtra:

00:00:13.133 T:3036101248 NOTICE: m_deviceType : AE_DEVTYPE_IEC958

00:00:13.133 T:3036101248 NOTICE: m_channels : FL,FR,BL,BR,FC,LFE,SL,SR

00:00:13.133 T:3036101248 NOTICE: m_sampleRates : 8000,11025,16000,22050,32000,44100,48000,64000,88200,96000,176400,192000

00:00:13.133 T:3036101248 NOTICE: m_dataFormats : AE_FMT_RAW,AE_FMT_S16NE,AE_FMT_S16LE

00:00:13.133 T:3036101248 NOTICE: m_streamTypes : STREAM_TYPE_AC3,STREAM_TYPE_DTSHD_CORE,STREAM_TYPE_DTS_1024,STREAM_TYPE_DTS_2048,STREAM_TYPE_DTS_512

00:00:13.133 T:3036101248 NOTICE: Enumerated PULSE devices:

00:00:13.133 T:3036101248 NOTICE: Device 1

00:00:13.133 T:3036101248 NOTICE: m_deviceName : Default

00:00:13.133 T:3036101248 NOTICE: m_displayName : Default

00:00:13.133 T:3036101248 NOTICE: m_displayNameExtra: Bluetooth Audio (PULSEAUDIO)

00:00:13.133 T:3036101248 NOTICE: m_deviceType : AE_DEVTYPE_PCM

00:00:13.133 T:3036101248 NOTICE: m_channels : FL,FR

00:00:13.133 T:3036101248 NOTICE: m_sampleRates : 5512,8000,11025,16000,22050,32000,44100,48000,64000,88200,96000,176400,192000,384000

00:00:13.133 T:3036101248 NOTICE: m_dataFormats : AE_FMT_U8,AE_FMT_S16NE,AE_FMT_S24NE3,AE_FMT_S24NE4,AE_FMT_S32NE,AE_FMT_FLOAT

00:00:13.133 T:3036101248 NOTICE: m_streamTypes : No passthrough capabilities

00:00:13.164 T:3036101248 NOTICE: Loaded settings file from special://xbmc/system/advancedsettings.xml

00:00:13.164 T:3036101248 NOTICE: Contents of special://xbmc/system/advancedsettings.xml are...

<?xml version="1.0" encoding="UTF-8" ?>

<showexitbutton>false</showexitbutton>

<samba>

</samba>

</advancedsettings>

00:00:13.166 T:3036101248 NOTICE: No settings file to load (special://masterprofile/advancedsettings.xml)

00:00:13.166 T:3036101248 NOTICE: Default Video Player: VideoPlayer

00:00:13.166 T:3036101248 NOTICE: Default Audio Player: paplayer

00:00:13.166 T:3036101248 NOTICE: Disabled debug logging due to GUI setting. Level 0.

00:00:13.166 T:3036101248 NOTICE: Log level changed to "LOG_LEVEL_NORMAL"

00:00:13.167 T:3036101248 NOTICE: CMediaSourceSettings: loading media sources from special://masterprofile/sources.xml

00:00:13.168 T:3036101248 NOTICE: Loading player core factory settings from special://xbmc/system/playercorefactory.xml.

00:00:13.170 T:3036101248 NOTICE: Loaded playercorefactory configuration

00:00:13.170 T:3036101248 NOTICE: Loading player core factory settings from special://masterprofile/playercorefactory.xml.

00:00:13.170 T:3036101248 NOTICE: special://masterprofile/playercorefactory.xml does not exist. Skipping.

00:00:13.224 T:3036101248 NOTICE: Running database version Addons27

00:00:14.997 T:3036101248 NOTICE: ADDONS: Using repository repository.kodi.game

00:00:14.997 T:3036101248 NOTICE: ADDONS: Using repository repository.libreelec.tv

00:00:14.997 T:3036101248 NOTICE: ADDONS: Using repository repository.xbmc.org

00:00:15.087 T:3036101248 NOTICE: InitWindowSystem: Using EGL Implementation: amlogic

00:00:15.152 T:3036101248 NOTICE: Found resolution 720 x 480 for display 0 with 720 x 480 @ 60.000000 Hz

00:00:15.152 T:3036101248 NOTICE: Found resolution 720 x 576 for display 0 with 720 x 576 @ 50.000000 Hz

00:00:15.152 T:3036101248 NOTICE: Found resolution 1280 x 720 for display 0 with 1280 x 720 @ 60.000000 Hz

00:00:15.152 T:3036101248 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080i @ 60.000000 Hz

00:00:15.152 T:3036101248 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 60.000000 Hz

00:00:15.152 T:3036101248 NOTICE: Found resolution 1280 x 720 for display 0 with 1280 x 720 @ 50.000000 Hz

00:00:15.152 T:3036101248 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080i @ 50.000000 Hz

00:00:15.152 T:3036101248 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 50.000000 Hz

00:00:15.153 T:3036101248 NOTICE: Found ([email protected]) at 18, setting to RES_DESKTOP at 16

00:00:15.153 T:3036101248 NOTICE: Checking resolution 16

00:00:15.170 T:3036101248 NOTICE: GL_VENDOR = ARM

00:00:15.170 T:3036101248 NOTICE: GL_RENDERER = Mali-400 MP

00:00:15.170 T:3036101248 NOTICE: GL_VERSION = OpenGL ES 2.0

00:00:15.170 T:3036101248 NOTICE: GL_SHADING_LANGUAGE_VERSION = OpenGL ES GLSL ES 1.00

00:00:15.171 T:3036101248 NOTICE: GL_EXTENSIONS = GL_OES_texture_npot GL_OES_vertex_array_object GL_OES_compressed_ETC1_RGB8_texture GL_EXT_compressed_ETC1_RGB8_sub_texture GL_OES_standard_derivatives GL_OES_EGL_image GL_OES_depth24 GL_ARM_rgba8 GL_ARM_mali_shader_binary GL_OES_depth_texture GL_OES_packed_depth_stencil GL_EXT_texture_format_BGRA8888 GL_OES_vertex_half_float GL_EXT_blend_minmax GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_rgb8_rgba8 GL_EXT_multisampled_render_to_texture GL_EXT_discard_framebuffer GL_OES_get_program_binary GL_ARM_mali_program_binary GL_EXT_shader_texture_lod GL_EXT_robustness GL_OES_depth_texture_cube_map GL_KHR_debug GL_ARM_shader_framebuffer_fetch GL_ARM_shader_framebuffer_fetch_depth_stencil GL_OES_mapbuffer

00:00:16.210 T:2948588448 NOTICE: Running database version Addons27

00:00:16.216 T:2948588448 NOTICE: Running database version ViewModes6

00:00:17.417 T:2948588448 NOTICE: Running database version Textures13

00:00:17.442 T:2948588448 NOTICE: Running database version MyMusic60

00:00:17.476 T:2948588448 NOTICE: Running database version MyVideos107

00:00:17.483 T:2948588448 NOTICE: Running database version TV29

00:00:17.489 T:2948588448 NOTICE: Running database version Epg11

00:00:17.499 T:3036101248 NOTICE: start dvd mediatype detection

00:00:17.563 T:3036101248 WARNING: CSkinInfo: failed to load skin settings

00:00:18.213 T:3036101248 WARNING: JSONRPC: Could not parse type "Setting.Details.SettingList"

00:00:18.588 T:3036101248 NOTICE: initialize done

00:00:18.588 T:3036101248 NOTICE: Running the application...

00:00:18.606 T:3036101248 NOTICE: starting zeroconf publishing

00:00:18.608 T:3036101248 NOTICE: CWebServer[8080]: Started

00:00:18.609 T:3036101248 NOTICE: starting upnp client

00:00:18.627 T:2831147936 NOTICE: ES: Starting UDP Event server on port 9777

00:00:18.640 T:2831147936 NOTICE: UDP: Listening on port 9777 (ipv6 : false)

00:00:19.405 T:2898256800 WARNING: CSkinInfo: failed to load skin settings

00:00:20.167 T:2898256800 ERROR: ## LibreELEC Addon ## oe::load_url(releases.json) ## ERROR: (URLError(gaierror(-3, 'Temporary failure in name resolution'),))

00:00:20.168 T:2898256800 ERROR: Traceback (most recent call last):

File "/root/http://LibreELEC.tv/build.LibreELEC-Amlogic_MX2.arm-8.0.2/LibreELEC-settings-6336f1e/.install_pkg/usr/share/kodi/addons/service.libreelec.settings/oe.py", line 271, in load_url

File "/usr/lib/python2.7/urllib2.py", line 154, in urlopen

File "/usr/lib/python2.7/urllib2.py", line 429, in open

File "/usr/lib/python2.7/urllib2.py", line 447, in _open

File "/usr/lib/python2.7/urllib2.py", line 407, in _call_chain

File "/usr/lib/python2.7/urllib2.py", line 1228, in http_open

File "/usr/lib/python2.7/urllib2.py", line 1198, in do_open

URLError: <urlopen error [Errno -3] Temporary failure in name resolution>

00:00:20.423 T:2787111840 ERROR: ## LibreELEC Addon ## oe::load_url(updates.php?i=e5c1259d1881879eac504d8f823c8b81&d=libreelec&pa=amlogic_mx2.arm&v=8.0.2&l=0

) ## ERROR: (URLError(gaierror(-3, 'Temporary failure in name resolution'),))

00:00:20.424 T:2787111840 ERROR: Traceback (most recent call last):

File "/root/http://LibreELEC.tv/build.LibreELEC-Amlogic_MX2.arm-8.0.2/LibreELEC-settings-6336f1e/.install_pkg/usr/share/kodi/addons/service.libreelec.settings/oe.py", line 271, in load_url

File "/usr/lib/python2.7/urllib2.py", line 154, in urlopen

File "/usr/lib/python2.7/urllib2.py", line 429, in open

File "/usr/lib/python2.7/urllib2.py", line 447, in _open

File "/usr/lib/python2.7/urllib2.py", line 407, in _call_chain

File "/usr/lib/python2.7/urllib2.py", line 1241, in https_open

File "/usr/lib/python2.7/urllib2.py", line 1198, in do_open

URLError: <urlopen error [Errno -3] Temporary failure in name resolution>

00:00:20.429 T:2787111840 ERROR: ## LibreELEC Addon ## system::check_updates_v2 ## ERROR: (TypeError('expected string or buffer',))

00:00:20.430 T:2787111840 ERROR: Traceback (most recent call last):

File "/root/http://LibreELEC.tv/build.LibreELEC-Amlogic_MX2.arm-8.0.2/LibreELEC-settings-6336f1e/.install_pkg/usr/share/kodi/addons/service.libreelec.settings/resources/lib/modules/system.py", line 768, in check_updates_v2

File "/usr/lib/python2.7/json/__init__.py", line 339, in loads

File "/usr/lib/python2.7/json/decoder.py", line 364, in decode

TypeError: expected string or buffer

00:00:20.452 T:2749887392 WARNING: CSkinInfo: failed to load skin settings

00:00:20.521 T:3036101248 ERROR: Control 1500 in window 13001 has been asked to focus, but it can't

P.Frink · November 23, 2019 at 11:02 PM

I haven never been able to get audio passthrough option available with kodi18.

It was always there on every previous build used on my mx2.

This week I went back to 17, there it was! Upgraded to 18... gone.

Plenty of threads on google about this, tried all solutions but none work. Have tried both hdmi and optical from box, but mx2 running running libreelec with kodi18 will not show audio passthrough option.

Anu suggestions?

TiaMaria · November 29, 2019 at 6:54 AM

I've managed to get it working (sort of) mx version 1, installed it on sdcard. But having some problem with 8.0, wifi related or something. Lots of waiting when adding apps and most time it doesnt work, it doesn't get installed. The Network options in the libreelec options are emty so i cant even change wifi if i wanted to (and need to because i setup on guest wifi which is separated from my nas). With the first boot i could setup wifi, now not anymore. It was a faulty sdcard, now with usb drive works good.

I would prefer it on NAND, but now I read if u want on NAND you must do it before upgrading, so now to late or do i misunderstood the line? Can it still be done with every new installation? (Maybe I just dont understand and it is already on NAND? Didn't see activity on usb stick light while booting, but without usb stick it wont boot.)

I also don't understand if i want to try higher version i have to update or can i just flash/install the rom i want through the toothpick option?

The instructions link is not working so its kinda hard for new people to step in. ( Support Hub | G-Box Support | G-Box Help | Matricom )

Marsbar · June 9, 2020 at 11:21 AM

Old thread, I know, but for anyone struggling with the install (given the install instruction link fails) archive.org still has the page saved

Installing OpenELEC (XBMC @ 1080p) on the G-Box MX2 | Matricom – G-Box Android TV Box – Kodi / XBMC Player

dookie · August 19, 2020 at 3:16 PM

Hi @KOPRajs, I was wondering if you could look into an issue. I have a Matricom MX2 and with the 20190424 build, the fast forward (right arrow key) always causes the box to freeze. Has anyone also encountered this issue? I switched back to 8.0.2 and everything runs fine. Could you please take a look? Thanks.

qUE_ARM · December 9, 2021 at 8:05 PM

Quote from dookie

Hi @KOPRajs, I was wondering if you could look into an issue. I have a Matricom MX2 and with the 20190424 build, the fast forward (right arrow key) always causes the box to freeze. Has anyone also encountered this issue? I switched back to 8.0.2 and everything runs fine. Could you please take a look? Thanks.

Try disabling the hardware acceleration in settings > player. Some streams seem to crash the hardware decoding, although disabling this can make HD streams struggle.

qUE-ARM · December 23, 2021 at 12:48 AM

Good news for anyone (like me) having issues getting their remote working with this libreelec build, I've got mine working. This has been really confusing because of the recent adoption of LIRC in libreelec, but it isn't used in this build.

Based on information from this page; http://www.microdev.it/wp/en/2016/12/…n-amlogic-socs/

My remote.conf file which is based on the /etc/amremote/libreelec.conf present in this libreelec;

Code

# Generic NEC remote

factory_code    = 0xf7080001
work_mode       = 1
repeat_enable   = 1
release_delay   = 150
debug_enable    = 1
reg_control    = 0xfbe40

key_begin
        0x0b 103    ;UP
        0x0e 108    ;DOWN
    0x10 105    ;LEFT
        0x11 106    ;RIGHT

    0x43 104    ;PAGE UP
    0x45 109    ;PAGE DOWN

        0x0d 28        ;OK (KEY_ENTER)
    0x1a 14        ;BACK (KEY_BACKSPACE)
    0x0a 46        ;MENU (KEY_C)

    0x1c 57        ;PAUSEPLAY (KEY_SPACE)
    0x15 45        ;STOP (KEY_X)

    0x53 19        ;REWIND (KEY_R)
    0x44 33        ;FASTFORWARD (KEY_F)
    0x57 104    ;PREVIOUS (KEY_PAGEUP)
    0x48 109    ;NEXT (KEY_PAGEDOWN)

    0x49 20        ;SUBTITLE (KEY_T)
    0x50 50        ;OPTIONS (KEY_M)

        0x00 11         ;0
    0x01 2          ;1
        0x02 3          ;2
        0x03 4          ;3
        0x04 5          ;4
        0x05 6          ;5
        0x06 7          ;6
        0x07 8          ;7
        0x08 9          ;8
        0x09 10         ;9
key_end

Display More

This file belongs as /storage/.config/remote.conf

after it's been copied there in SSH type;

remotecfg /storage/.config/remote.conf

It's early days and I've not completely mapped the keys for my generic Android/NEC remote, any keys not recognised by the system should be logged in the system log (dmesg -c)

You only need the remote.conf override and not rc_maps.cfg, lircd.conf or whatever to get this working. Did a lot of digging to find this info., but I thought I'd share it.

qUE-ARM · December 23, 2021 at 1:00 AM

@KOPRajs, I'd really like to have a go at building whatever libreelec last supported meson6.

I get the copy your source over the libreelec mainline, but I can't get it to build.

I'm using ubuntu, any chance you could list what dependencies are needed, I've got build-essentials so far, but it's not clear what else is needed, the errors don't hint at what else needs to be installed. And I suspect the info on the official wiki doesn't account for the amlogic hardware.

Do I need gcc-arm-none-eabi?

**chewitt** · December 23, 2021 at 5:56 AM

Last official release supporting Meson6 hardware was 9.0.2 and you will need to use Ubuntu 16.04 or 18.04 to build the image.

https://wiki.libreelec.tv/development-1/…cs#dependencies has info on package dependencies

P.Frink · January 15, 2022 at 4:36 AM

I've had this box running well for a few years now with 9.0.1 & kodi 18.1, but I did a reset/clean this week, it works fine with 7.95.3 & kodi 17, as soon as i update to 9/k18, I lose all ability to instal, cannot even download a new skin, no SMB , just no connections.

Have a new box and want to keep this for another spare tv.

Gotta b something simple.

Any advise?

**chewitt** · January 15, 2022 at 7:49 AM

It sounds like the issue with expired CA details in the TLS certificate chain. Have a read here RE: Cannot Install/Update Addons

P.Frink · January 17, 2022 at 11:02 AM

I currently have 9.0.1 & kodi 18.1 running since this was the combination that worked well. I manged to get Samba working finally but this is to do with the SMB setting I played around with.
I attempted the instruction on the other thread, as this sounds like my issue - zip files work - but not from repositories and no skins installing

EDIT: I have given up and will just put kodi17 on this box and use for samba, no idea why 18 wont work suddenly after years.
oh well, pity as box has been good and still works.

qUE-ARM · January 24, 2022 at 5:22 PM

Quote from chewitt

Last official release supporting Meson6 hardware was 9.0.2 and you will need to use Ubuntu 16.04 or 18.04 to build the image.
https://wiki.libreelec.tv/development-1/…cs#dependencies has info on package dependencies

Ah that's a shame, I spotted MESON6 defines in the later 9.2.x, but I guess the build process has changed enough to prevent it from being built with that support.

qUE-ARM · January 24, 2022 at 5:29 PM

Quote from P.Frink

I've had this box running well for a few years now with 9.0.1 & kodi 18.1, but I did a reset/clean this week, it works fine with 7.95.3 & kodi 17, as soon as i update to 9/k18, I lose all ability to instal, cannot even download a new skin, no SMB , just no connections.
Have a new box and want to keep this for another spare tv.
Gotta b something simple.
Any advise?

I've had issues like this when the permissions have been changed on /storage, I'd do the 7.95.3 factory AV "toothpick" install then, do the tune2fs with SSH (this will also break /storage if not done) and upgrade to 9.0.2 (just copy the tar archive into /storage/.upgrade and reboot)

P.Frink · January 27, 2022 at 3:10 AM

Quote from qUE-ARM

I've had issues like this when the permissions have been changed on /storage, I'd do the 7.95.3 factory AV "toothpick" install then, do the tune2fs with SSH (this will also break /storage if not done) and upgrade to 9.0.2 (just copy the tar archive into /storage/.upgrade and reboot)

Thanks, yes I have tried multiple times, it just will not work with kodi 18 anymore

EDIT: Finally fixed, it was the the same issue as Cannot Install/Update Addons afterall

[9.0.0] LibreELEC builds for MX2/G18

Similar Threads

[BUG] S905X Krypton: Horrible banding in 10 Bit videos

[8.0.2c] LibreELEC 8.0 builds for KIII Pro (S912)