Only test i've done so far is with P8.1 and DV Reference which cased skipped frames and lipsync issues on my N100.
[x86-64][LibreELEC x CB1 Builds] Dolby Vision FEL, HDR10+ and Full 3D
-
ht2tweak -
March 14, 2026 at 2:33 PM -
Thread is Resolved
-
-
Only test i've done so far is with P8.1 and DV Reference which cased skipped frames and lipsync issues on my N100.
Very surprised, I put the stable release as pre-release before understanding this point. Could you share the debug log please?
-
New video upscalers including FSR - Choose separate filters for 1080p and above and below 1080p, based on the source resolution. Both menus default to Kodi Default and offer the same filters for SDR, HDR, and Dolby Vision, including FSR 1 with or without RCAS, FSRCNNX x2, and Anime4K Fast. Player Information shows the active filter when the picture is upscaled.
Happy to see something good came out of my ramblings in code. As you're aware I tried to bring shaders functionalities in more advanced directions (multiple shaders, activation based on rules for format, resolution, source folder, etc.). I will probably resync to your work and try to add to it directly, so development can be easier, in case I come up with something good and you decide to port it over.
I have zero personal ambitions in this, I am not interested in creating alternative builds. Anything I'll do, if I'll do anything else, will just be an homage to your great work, for which I remain endlessly thankful.
-
Very surprised, I put the stable release as pre-release before understanding this point. Could you share the debug log please?
After a reboot skipped frames went down from over 350 in a short period of time to 6 and no sync issues.
I'll play around a bit more and see if it reoccurs.
-
Yeah very interested if you found something.
I’ve launched an extensive audio-video synchronization stress test, I normally include that kind of tests in my non-regression testing before the releas. But this time I’m taking it a step further. It’s possible that some issues slipped through that I hadn’t caught before.
-
If you want to see the backstage story : this is one of the report that my non-regression & performance test produce it is in place since RC3 : switch the rendering circuit in live while playing the movie and see if the audio/video resync properly and yes. No issue, audio/video is sync within the frame.
This one is for a 8.1 Profile compressed with the N100. I have the same for the 7430U, and also for 2 FEL Remuxes, the ISO of Geminiman, and 2 HDR10 files (one remux, one compressed) = 12 reports.
You can see that switching from Master reference to HDR10 rendering is the most intense switch, the red line are some frame drops, but after 2,5s everything is stable and audio sync with video.
I started the more intense tests and I also measure the delay not inside the miniPC but from my TV to see if I can catch something -
Congrats CroqueMr! This is amazing work! You've kinda made any non-LE build options irrelevant... Amlogic, Zidoo, Dune, etc. At least for us demanding local playback fans.
-
-
- Best Answer
Go in the settings and under CB1 Settings activate "enhanced player information"
-
Go in the settings and under CB1 Settings activate "enhanced player information"
Thank you, that was it!!!
-
Doh on my part clarkss12 earlier, didn't ask you to check that obvious setting.
-
CroqueMr Congrats on the new release and thank you very much for the work you already put into making my config work!
I tried to read some of the commits you made to make the RX550 work but my code reading comprehension is not as good as i would like it to be.
I sent you a log and details over on github, still does not work for me but happy to help diagnose, test some more and help find the issue. -
CroqueMr Congrats on the new release and thank you very much for the work you already put into making my config work!
I tried to read some of the commits you made to make the RX550 work but my code reading comprehension is not as good as i would like it to be.
I sent you a log and details over on github, still does not work for me but happy to help diagnose, test some more and help find the issue.Yeah the RX550 is very experimental, please send me the debug log in github, you have the detail in github to activate the enhanced debug log and to share it.
-
Congratulations on your great work really enjoyed playing around and testing again. Especially with 3D and now 4K brought my collection back to life. I will be testing on my laptop again to see if the hdmi output this time i had to use hades build which does that very well. Thanks again for all your hard work well appreciated.
-
Yeah the RX550 is very experimental, please send me the debug log in github, you have the detail in github to activate the enhanced debug log and to share it.
Included the "miniURLs" for both crashlog and normal log.
-
Could you share the log please.
I updated to latest R1.0.0 stable release and so far no issues. Audio is fine and GUI is also fine.
I think this is the begining of the end for Ugoos, Zidoos, Dune and such for a local playback device. I have both AM6b+ and Zidoo Z9X 8K but this X86 build is on another level.
-
Looking forward to test your build soon, but have one question : Is there a ”dv mode always on” for lldv to force everything to lldv /hdr10 ?
-
I just upgraded my Libreelec mini-pc from a Celeron-based device to a 3500U just for this amazing DV version. It's working great but I seem to have one small issue. After startup, I'd play something and there would be no audio. I checked the audio settings and noticed that my LG C9 on HDMI #1 has defaulted to HDMI #0. I manually set it back to HDMI #1 and all is well until the next restart. I did run "getedid create" but I have always used that.
It's the same HDMI cable I've been using for years with the old box, so I assume that's okay.
I don't know if this is a Libreelec-DV issue or a general one but any suggestions would be appreciated
-