Thoradia Add-ons

  • I am also waiting for Thoradia updates to work with the new openssl. I keep my fingers crossed and I hope that Thoradia will soon help us.

  • Hi,

    I installed flexget addon to my coreelec,but when I executed it,I got a warning message:

    Quote

    Your locale declares ascii as the filesystem encoding. Any plugins reading filenames from disk will not work properly for filenames containing non-ascii characters. Make sure your locale env variables are set up correctly for the environment which is launching FlexGet.

    Could you tell me how to solve this problem?

    Thanks in advance!

  • Hello, guys!

    I figured out someting. For those who want to use multiples apps (aka Radarr, Sonarr, Jackett and Transmission) in a limited hardware (aka RPi) enable swap memory helps a lot!

    Theres a [How To] here explaining how to do this. I recommend!

    Supercalifragilisticexpialidocious! (inscribed in large friendly letters)

    My hardware is a Raspberry Pi 3b

  • From which repository can I find this Locale addon?

    LibreELEC - you can just use search and it will find for you.

    Better support for Amlogic devices: use CoreELEC

    Blu-ray Disc Java menus support - forum thread, Github

    my lamp addon (unofficial/community with limited support)
    my touchscreen support and instructions by Grruhn (now touchscreen addon exists in repository)

  • LibreELEC - you can just use search and it will find for you.

    Sorry but I'm using CoreELEC now and the LibreELEC repo isn't included in my system by default,I just used searching but find nothing.So I guess I have to install that repo manually.Could you please tell me where can I find the .zip file for LibreELEC repo?I googled it and didn't get a right answer.

  • You do know this is support forum for LibreELEC and not CoreELEC?


    Anyway, find Locale addon with search function and install it. Maybe your issue will gone.

    Better support for Amlogic devices: use CoreELEC

    Blu-ray Disc Java menus support - forum thread, Github

    my lamp addon (unofficial/community with limited support)
    my touchscreen support and instructions by Grruhn (now touchscreen addon exists in repository)

  • Hello,


    I didn't know where to post my problem since I'm using CoreElec (Odroid N2), but this is the only thread about Thoraradia addons.

    When I want to open Transmission addon I get a message telling me that I have to open the settings. I haven't found a way to fix it.


    Any thoughts?


    Thank you!

  • Hi Thoradia,


    I've downloaded the service.transmission-9.1.16.zip from your repository on Github, but when I tried to "install from zip" on LE 9.01 add-ons page it returns error msg that installing from unofficial sources is disabled :(

    What's the work-around?

  • Transmission settings are on settings of Transmission add-on.

    Supercalifragilisticexpialidocious! (inscribed in large friendly letters)

    My hardware is a Raspberry Pi 3b

  • Hi Thoradia,


    I've downloaded the service.transmission-9.1.16.zip from your repository on Github, but when I tried to "install from zip" on LE 9.01 add-ons page it returns error msg that installing from unofficial sources is disabled :(

    What's the work-around?

    You have to enable unknown sources in Settings > System > Add-ons > Unknown Sources

    But I think you have to install the repository and then install Transmission from the Thoradia repository.

    Link to download repo: service.thoradia.zip

    Supercalifragilisticexpialidocious! (inscribed in large friendly letters)

    My hardware is a Raspberry Pi 3b

  • edjalmo - thanks mate! I realised my mistake and fixed the problem a couple of hours ago :)

    Do know how to get MiniDLNA scan external USB drives?

    Or the command to force-restart service.minidlna ?


    At 62 years of age I'm so lame I'm not even ashamed of it :)

  • edjalmo - thanks mate! I realised my mistake and fixed the problem a couple of hours ago :)

    Do know how to get MiniDLNA scan external USB drives?

    Or the command to force-restart service.minidlna ?


    At 62 years of age I'm so lame I'm not even ashamed of it :)

    No problem :)


    I don't use MiniDLNA, but I search and found this: Setup MiniDlna To work with USB drives | Never Stop Learning

    Read the section INSTALL MINIDLNA

    Try edit minidlna.conf

    If this is installed as add-on this file are probably here /.kodi/userdata/addon_data

    In LibreELEC you don´t need sudo.

    Following the tutorial to force-restart it is like this

    Code
    1. systemctl service minidlna.service force-reload

    If don't work try open a new thread about this, since this is not a problem with Thoradia repo (just to keep things organized).

    Supercalifragilisticexpialidocious! (inscribed in large friendly letters)

    My hardware is a Raspberry Pi 3b

    Edited once, last by edjalmo ().

  • Hi,

    Not sure if this is known problem, but current flexget package (v9.1.10) apparently has dependency on pkg_resources which isn't available in LE (9.1, don't know about 9.0?), that makes it unusable:




    I'm looking for some pointers where to head next...

  • @eljamo

    Thank you for the tips regarding miniDLNA add-on !

    I've installed miniDLNA from default library and got it running. The actual cmd commands are:

    >>> systemctl start service.minidlna

    >>> systemctl stop service.minidlna

    >>> systemctl force-reload service.minidlna

    >>> systemctl status service.minidlna


    I now have LE 9.0.1 installed on the internal NVME drive and there are 2 external USB's (NTFS formatted) attached

    After installing miniDLNA add-on on LE, all you need to is stop the service using PuTTy and browse to

    \\192.168.1.LE_IP > Userdata > addon_data > service.minidlna > config > minidlna.conf

    when you 2-click it opens in Word and changes are saved in ASCII.

    after applying the changes - start the service and check the status


    My "cleaned-up" <minidlna.conf> looks like this:

    media_dir=/media/SSD-500

    media_dir=/media/WD3Tb

    media_dir=./storage/downloads

    friendly_name=miniDLNA

    inotify=yes

    enable_tivo=no

    strict_dlna=no

    serial=12345678

    model_number=1

    notify_interval=1800

    At the moment everything is working beautifully, all 3 sources are getting scanned and broadcasted across DLNA including artwork embedded in FLAC's

    Had a bit of trial and error with "downloads" before figuring out there should be a dot in <media_dir=./storage/downloads> line

    Very happy :) Hope someone finds this little [How-To] useful.

  • When will Amlogic/arm for 9.0 be updated? I see the others were updated 4 days ago and it's been 3 months since the last update for Amlogic/arm. Any reason for the delay?

  • When will Amlogic/arm for 9.0 be updated? I see the others were updated 4 days ago and it's been 3 months since the last update for Amlogic/arm. Any reason for the delay?

    I don't know why Thoradia don't updated. But if the apps you use work with releases you can update they by yourself.

    Radarr/Sonarr example: go to System > Updates > Install latest

    You can see if the apps work with releases or not here: Home · thoradia/LibreELEC.tv Wiki · GitHub


    Edit: I don't no for sure if all apps that work with releases you can update by yourself, but I know that some you can.

    Supercalifragilisticexpialidocious! (inscribed in large friendly letters)

    My hardware is a Raspberry Pi 3b

    Edited once, last by edjalmo ().