Hello,
Wierd thing with Transmission on Coreelec, my custome settings.json file is overwriten every time I start transmission
I use the following path /storage/.kodi/userdata/addon_data/service.transmission/settings.json
Only the settings available through the the settings of the transmission add-on are overwritten.
Use the settings of the transmission add-on to set them.
If you still have issues, provide more details here.
CoreELEC has its own forum for support.
Thoradia add-ons for CoreELEC and LibreELEC are the same, except for the binaries.
Most issues addressed in this thread apply to both CoreELEC and LibreELEC.
Is there some kind of download manager addon with a WebUI that can be accessed through the local network? I have some large direct file downloads that I would like to run on the RPi. I always use Transmission's Web UI for torrents, but I want something similar for direct downloads as well.
Is there some kind of download manager addon with a WebUI that can be accessed through the local network? I have some large direct file downloads that I would like to run on the RPi. I always use Transmission's Web UI for torrents, but I want something similar for direct downloads as well.
There is aria2.
The add-on does not include a web-UI, but you can use this.
The following warning appears in the Medusa Warning Logs:
2018-10-16 08:05:22 WARNING SHOWQUEUE-ADD :: [4614efc]
=========================================================================================
FFmpeg (ffprobe) not found on your system or could not be loaded.
Visit https://ffmpeg.org/download.html to download it.
If you still have problems, please check if the downloaded version matches your system.
To load FFmpeg (ffprobe) from a specific location, please define the location as follow:
knowit --ffmpeg /usr/local/ffmpeg/bin <video_path>
knowit --ffmpeg /usr/local/ffmpeg/bin/ffprobe <video_path>
knowit --ffmpeg "C:\Program Files\FFmpeg" <video_path>
knowit --ffmpeg C:\Software\ffprobe.exe <video_path>
=========================================================================================Where do I enter the knowit command to point it to /usr/bin/ffmpeg? Or is there a way I can change the default setting? I did not see any reference to ffmpeg in the config.ini.
There is aria2.
The add-on does not include a web-UI, but you can use this.
Hello
I have installed aria2c but I can not install the WebGui. I just started with Libreelec/Linux and I'm pretty fresh. Can you help me install the GUI step by step in Libreelec?
Thanks a lot
The following warning appears in the Medusa Warning Logs:
Code2018-10-16 08:05:22 WARNING SHOWQUEUE-ADD :: [4614efc] ========================================================================================= FFmpeg (ffprobe) not found on your system or could not be loaded. Visit https://ffmpeg.org/download.html to download it. If you still have problems, please check if the downloaded version matches your system. To load FFmpeg (ffprobe) from a specific location, please define the location as follow: knowit --ffmpeg /usr/local/ffmpeg/bin <video_path> knowit --ffmpeg /usr/local/ffmpeg/bin/ffprobe <video_path> knowit --ffmpeg "C:\Program Files\FFmpeg" <video_path> knowit --ffmpeg C:\Software\ffprobe.exe <video_path> =========================================================================================Where do I enter the knowit command to point it to /usr/bin/ffmpeg? Or is there a way I can change the default setting? I did not see any reference to ffmpeg in the config.ini.
Under LibreELEC 9.0, ffmpeg/ffprobe are shipped with the FFmpeg Tools add-on, which installs ffmpeg and ffprobe in PATH.
You will need to restart Medusa or reboot LibreELEC for Medusa to use the updated PATH.
Under earlier versions of LibreELEC, the FFmpeg Tools add-on ships ffmpegx/ffprobex.
To know where they are installed, type which ffprobex in a terminal.
Not sure how to configure that in Medusa. Best would be to see with them and tell us if you find out
Hello
I have installed aria2c but I can not install the WebGui. I just started with Libreelec/Linux and I'm pretty fresh. Can you help me install the GUI step by step in Libreelec?
Thanks a lot
First configure the server on LibreELEC:
From a terminal edit aria2.conf:
nano /storage/.kodi/userdata/addon_data/service.aria2/aria2.conf
Adding the following line should be enough for a start:
dir=/storage/downloads
Then restart the service:
systemctl restart service.aria2
Then, on a system which has a browser with which you want to access aria2:
Download and unzip https://github.com/ziahamza/webui-aria2/archive/master.zip
Open webui-aria2-masterdocs/index.js with the browser
Configure 'Connection Settings' (setting the host to the IP address of your LibreELEC device should be enough).
Display MoreFirst configure the server on LibreELEC:
From a terminal edit aria2.conf:
nano /storage/.kodi/userdata/addon_data/service.aria2/aria2.conf
Adding the following line should be enough for a start:
dir=/storage/downloads
Then restart the service:
systemctl restart service.aria2
Then, on a system which has a browser with which you want to access aria2:
Download and unzip https://github.com/ziahamza/webui-aria2/archive/master.zip
Open webui-aria2-masterdocs/index.js with the browser
Configure 'Connection Settings' (setting the host to the IP address of your LibreELEC device should be enough).
I will try. Thanks
Display MoreFirst configure the server on LibreELEC:
From a terminal edit aria2.conf:
nano /storage/.kodi/userdata/addon_data/service.aria2/aria2.conf
Adding the following line should be enough for a start:
dir=/storage/downloads
Then restart the service:
systemctl restart service.aria2
Then, on a system which has a browser with which you want to access aria2:
Download and unzip https://github.com/ziahamza/webui-aria2/archive/master.zip
Open webui-aria2-masterdocs/index.js with the browser
Configure 'Connection Settings' (setting the host to the IP address of your LibreELEC device should be enough).
It worked. Thanks a lot
Another question. Sonar does not look for the series in other languages and the author, for now, he will not implement it,. Is there any chance of doing it with sick beard or some similar (TV shows) in libreelec?
It worked. Thanks a lot
Another question. Sonar does not look for the series in other languages and the author, for now, he will not implement it,. Is there any chance of doing it with sick beard or some similar (TV shows) in libreelec?
Thank you for the feedback
Medusa is an alternative to Sonarr
Thank you for the feedback
Medusa is an alternative to Sonarr
Thanks i will check
Hello again
Thank you for your excellent work
In the qbitorrent there is some way that the "automatic torrent management" Is the default active always?
Hello again
Thank you for your excellent work
In the qbitorrent there is some way that the "automatic torrent management" Is the default active always?
I don't know.
Check with qBittorrent developers/community and let me know if I should change something.
I don't know.
Check with qBittorrent developers/community and let me know if I should change something.
Hello
I found the solution In the next post
Advanced Saving Management on QNAP
You only need to add the following lines in the Qbitorrent.config
I only add the fira and Still works
Am I missing something or is sickrage alive again? If it is will you include it into repo?
where is the rtorrent.rc config file? Where can I move it to for it to apply? The default says, the root folder, as found here: rtorrent/rtorrent.rc at master · rakshasa/rtorrent · GitHub
"
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.
"
But the setup is different for libreelec, so I'm trying to understand.
Hey guys,
So, I installed Thoradia repo on LibreELEC (alpha).
Some addons installed just fine, like Medusa and qBittorrent.
Others, like Jackett, need os.libreelec.tv and tool.mono, which somehow aren't available....In other words: Can't install Thoradia Mono Tools for some reason.
Here's the log file:
Cheers,
Morguito.
