Thoradia Add-ons

  • Can I update medusa through webui on Amlogic kszaq build (LibreELEC 8.2.3 on a S905) ?


    I tried a few month back and ran into python issue.


  • Can I update medusa through webui on Amlogic kszaq build (LibreELEC 8.2.3 on a S905) ?


    I tried a few month back and ran into python issue.


    I you insist using a kszaq build then provide details about your python issue.

    Otherwise use CoreELEC.

    Keep it legal and carry on

  • Thanks for your great work.

    Any chance supporting Flood for rtorrent ? :)

    Flood requires node.js which requires clang/clang++

    I have no time for that at the moment.


    What does rtorrent/flood have that qbittorrent does not?

    Keep it legal and carry on

  • Hey Thoradia :) just wanted to try out qbittorrent but can't connect to it through port 8880 :(


    What's going on ? Do I need to install anything elese ?


    systemctl status service.qbittorrent throwing it's running ;)

  • Hey Thoradia :) just wanted to try out qbittorrent but can't connect to it through port 8880 :(


    What's going on ? Do I need to install anything elese ?


    systemctl status service.qbittorrent throwing it's running ;)

    This status looks good.

    qbittorrent web-ui should be available at http://...:8880

    What does your browser say?

    Keep it legal and carry on

  • Do you mean in userdata folder or addon folder ? :) WebUI\Address=* where should I add this line ? ;)

    Set WebUI\Address=* and WebUI\ServerDomains=* in /storage/.kodi/userdata/addon_data/service.qbittorrent/.config/qBittorrent/qBittorrent.conf

    Keep it legal and carry on

  • I you insist using a kszaq build then provide details about your python issue.

    Otherwise use CoreELEC.

    Excellent suggestion, moved to CoreELEC problem solved Medusa fully up to date


    Thanks for the tip

  • Hi all, currently i have kodi krypton, libreelec running on a raspberry pi 2 with 2 usb drives connected. 1 Usb drive is powered external, the other one gets it's power from the usb of the pi 2. That setup worked flawless untill i started to fool around with Thoradia addons, currently i have couchpotato, jackett, sonarr, transmission activated and i notice a performance drop and my pi crashes a lot more then it used to. I want to keep using this setup so i was thinking to swapping the pi 2 for a Raspberry Pi 3 B+, 4x 1,4 GHz, 1 GB RAM. Would that work better? Thx for the advice.

    Edited 2 times, last by pengo ().

  • Hi all, currently i have kodi krypton, libreelec running on a raspberry pi 2 with 2 usb drives connected. 1 Usb drive is powered external, the other one gets it's power from the usb of the pi 2. That setup worked flawless untill i started to fool around with Thoradia addons, currently i have couchpotato, jackett, sonarr, transmission activated and i notice a performance drop and my pi crashes a lot more then it used to. I want to keep using this setup so i was thinking to swapping the pi 2 for a Raspberry Pi 3 B+, 4x 1,4 GHz, 1 GB RAM. Would that work better? Thx for the advice.

    Thoradia add-ons consume resources, in particular CPU, memory and I/O.

    Use top to monitor usage.

    In top type c to monitor CPU and type m to monitor memory.


    Your RPi2 may crash when memory or I/O usage becomes too high.

    You may (try to) prevent crashes by configuring transmission to use limited bandwith (eg 2 Mb/s) and to download when LibreELEC is otherwise not used (eg at night).


    The above applies to RPI3.

    Keep it legal and carry on

  • Hello,


    Wierd thing with Transmission on Coreelec, my custome settings.json file is overwriten every time I start transmission


    I use the following path /storage/.kodi/userdata/addon_data/service.transmission/settings.json

  • Wierd thing with Transmission on Coreelec, my custome settings.json file is overwriten every time I start transmission

    CoreELEC has its own forum for support.