[8.0.2e] LibreELEC 8.0 for S905/S905X

Pitou · January 13, 2017 at 3:15 PM

ok, thanks kszaq for the explanation,

Quote

Official WH builds are aarch64 whilst my builds are arm and also are for all S905 devices, not only WeTek Hub. It should be safe to update to my build with .nocompat although you may need to reinstall your addons, you can read how to do this here: LibreELEC

My branch is not guaranteed to work with any target other than S805/S905 and arm ARCH.

Could you tell me how to compile your branch?

I tried:

Code

PROJECT=Generic ARCH=arm make image

But it doesn't work. I'm getting this error message:

Code

manager@linuxmint ~/LE/kszaq/LibreELEC.tv $ PROJECT=Generic ARCH=arm make -j8 image
./scripts/image mkimage


 =================================================================================
 ERROR: Architecture not found, use a valid Architecture
 for your project or create a new config
 =================================================================================


 Valid Architectures for your project: Generic
 - x86_64
 - arm
Makefile:12 : la recette pour la cible « image » a échouée
make: *** [image] Erreur 1

Display More

Thank you.

Pitou!

Gendo · January 13, 2017 at 3:22 PM

Quote from Pitou

ok, thanks kszaq for the explanation,

Could you tell me how to compile your branch?

I tried:

Code

PROJECT=Generic ARCH=arm make image

But it doesn't work. I'm getting this error message:

Code

manager@linuxmint ~/LE/kszaq/LibreELEC.tv $ PROJECT=Generic ARCH=arm make -j8 image
./scripts/image mkimage


 =================================================================================
 ERROR: Architecture not found, use a valid Architecture
 for your project or create a new config
 =================================================================================


 Valid Architectures for your project: Generic
 - x86_64
 - arm
Makefile:12 : la recette pour la cible « image » a échouée
make: *** [image] Erreur 1

Display More

Thank you.

Pitou!

Display More

PROJECT=S905 ARCH=arm make release

niabi · January 13, 2017 at 4:13 PM

Thanks kszaq for all your hard work on this! I have probably an unusual question. I am trying to make my s905 work as an emulation machine, so far I have gotten the newest Lakka to work by using the kodi addon, I placed it in the autostart and now it boots directly to retroarch, which is wonderful for me. But I want to go a step forward and remove kodi from your builds and have it boot something else, like retroarch (basically the same I am doing now but without kodi at all) but I am stuck on how to do that in your source code, could you point me in the right direction? Or this is simply not possible?

Thank you!

Sent from my Lenovo K50-t5 using Tapatalk

EasySly · January 13, 2017 at 4:22 PM

kszaq my debug info about remote problem

long press of any button doesn't work
home doesn't work

My sequence of pressing buttons:
1. ok
2. back
3. ok
4. home
5. menu
6. long menu

FFgB
SACU

juramusger · January 13, 2017 at 5:45 PM

Quote from juramusger

s I also have lirc occupying around 40% cpu according to top, command "/usr/lib/kodi/kodi.bin --standalone -fs --lircdev /run/lirc/lircd"
want a log for that as well?

hmm, sorry for maybe having misled everyone. I have the same behaviour on older builds as well, in fact every build I still have on an SD card (7.0.3.012 and older 7.90 builds).

Code

2723 root      20   0  584304 177264  25680 S  35.6  9.6   9:33.93 /usr/lib/kodi/kodi.bin --standalone -fs --lircdev /run/lirc/lircd

this seems a bit excessive for cpu utilization, doesn't it?
or is this kodi + lircdev? still, is 35 % cpu normal on s905x devices when kodi is idle? sorry if this is completely noob.

flynn · January 13, 2017 at 6:52 PM

kszaq on a clean install of 7.90.beta1 (2017-01-12) a freshly installed hyperiond from LibreELEC Add-ons repository is not starting. Getting following error:

Code

./hyperiond: error while loading shared libraries: libprotobuf.so.11: cannot open shared object file: No such file or directory

Edit:
The Hyperion version in the repository seems to be buggy. Raybuntu's version from the Odroid forum works:
ODROID Forum • View topic - LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

tomasvilda · January 13, 2017 at 6:52 PM

Mini M8S II S905X home button not working after upgrading from previous build

alsoft · January 13, 2017 at 7:34 PM

kszaq
The following buttons don't work
1= PLAY
2= PAUSE
3= STOP
4= Fast Forward
5= Rewind
6= long press OK

Code

[   15.130986@2] hdmitx: audio: aout notify size 16
[   15.130990@2] hdmitx: audio: no update
[   15.132639@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same sou                        rce mode(1)
[   15.132649@2] aml_spdif_dai: share the same clock
[   15.132656@2] aml_spdif_dai: iec958 mode PCM32
[   15.132663@2] aml_audio_hw: IEC958 PCM32
[   15.132669@2] hdmitx: audio: aout notify rate 44100
[   15.132673@2] hdmitx: audio: aout notify size 32
[   15.132677@2] hdmtix: set audio
[   15.132690@2] hdmitx tx_aud_src = 0
[   15.132715@2] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
[   15.132719@2] hdmitx aud_n_para = 6272
[   15.132737@2] hdmitx set channel status
[   15.132795@2] hdmitx: audio: Audio Type: PCM
[   15.132799@2] hdmitx: audio: set audio param
[   15.132808@2] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
[   15.133104@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same sou                        rce mode(1)
[   15.133109@0] aml_spdif_dai: share the same clock
[   15.133114@0] aml_spdif_dai: iec958 mode PCM32
[   15.133120@0] aml_audio_hw: IEC958 PCM32
[   15.133125@0] hdmitx: audio: aout notify rate 44100
[   15.133129@0] hdmitx: audio: aout notify size 32
[   15.133131@0] hdmitx: audio: no update
[   15.133137@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
[   15.136871@0] aml_snd_m8_card aml_m8_snd.46: I2S playback enable
[   15.136886@0] aml_snd_m8_card aml_m8_snd.46: IEC958 playback enable
[   15.461447@0] aml_snd_m8_card aml_m8_snd.46: I2S playback disable
[   15.461561@0] aml_snd_m8_card aml_m8_snd.46: IEC958 playback disable
[   15.461876@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same sou                        rce mode(1)
[   15.461927@0] aml_spdif_dai: share the same clock
[   15.462028@0] aml_spdif_dai: iec958 mode PCM32
[   15.462093@0] aml_audio_hw: IEC958 PCM32
[   15.462152@0] hdmitx: audio: aout notify rate 44100
[   15.462197@0] hdmitx: audio: aout notify size 32
[   15.462238@0] hdmitx: audio: no update
[   15.462308@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
[   15.463879@0] aml_spdif_dai: enterd aml_spdif_play,set_clock:5,sample_rate=4
[   15.463953@0] aml_spdif_dai: share the same clock
[   15.464025@0] aml_audio_hw: IEC958 16bit
[   15.464079@0] hdmitx: audio: aout notify rate 48000
[   15.464121@0] hdmitx: audio: aout notify size 16
[   15.464166@0] hdmtix: set audio
[   15.464268@0] hdmitx tx_aud_src = 0
[   15.464499@0] hdmitx: fs = 3, cd = 4, tmds_clk = 148500
[   15.464546@0] hdmitx aud_n_para = 6144
[   15.464697@0] hdmitx set channel status
[   15.465084@0] hdmitx: audio: Audio Type: PCM
[   15.465126@0] hdmitx: audio: set audio param
[   15.480698@1] sdio_reset_comm():
[   15.493146@0] fb: osd[0] enable: 1 (kodi.bin)
[   15.493761@0] audio_dsp: buf=0
[   15.493766@0] audio_dsp: IEC958_mode_raw=0
[   15.493802@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[   15.493811@0] audio_dsp: last mode 0,now 0
[   15.502688@2] [sdio_reinit] finish
[   15.503252@0] aml_spdif_dai: share the same clock
[   15.503260@0] aml_audio_hw: IEC958 16bit
[   15.503270@0] hdmitx: audio: aout notify rate 48000
[   15.503272@0] hdmitx: audio: aout notify size 16
[   15.503274@0] hdmitx: audio: no update
[   15.506128@0] aml_spdif_dai: share the same clock
[   15.506150@0] aml_audio_hw: IEC958 16bit
[   15.506162@0] hdmitx: audio: aout notify rate 48000
[   15.506168@0] hdmitx: audio: aout notify size 16
[   15.506172@0] hdmitx: audio: no update
[   15.508298@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same sou                        rce mode(1)
[   15.508317@0] aml_spdif_dai: share the same clock
[   15.508323@0] aml_spdif_dai: iec958 mode PCM32
[   15.508332@0] aml_audio_hw: IEC958 PCM32
[   15.508339@0] hdmitx: audio: aout notify rate 44100
[   15.508348@0] hdmitx: audio: aout notify size 32
[   15.508354@0] hdmtix: set audio
[   15.508371@0] hdmitx tx_aud_src = 0
[   15.508410@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
[   15.508416@0] hdmitx aud_n_para = 6272
[   15.508442@0] hdmitx set channel status
[   15.508519@0] hdmitx: audio: Audio Type: PCM
[   15.508528@0] hdmitx: audio: set audio param
[   15.508539@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
[   15.508788@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same sou                        rce mode(1)
[   15.508800@0] aml_spdif_dai: share the same clock
[   15.508809@0] aml_spdif_dai: iec958 mode PCM32
[   15.508826@0] aml_audio_hw: IEC958 PCM32
[   15.508832@0] hdmitx: audio: aout notify rate 44100
[   15.508837@0] hdmitx: audio: aout notify size 32
[   15.508842@0] hdmitx: audio: no update
[   15.508859@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
[   15.509205@2] bFWReady == _FALSE call reset 8051...
[   15.515337@0] aml_snd_m8_card aml_m8_snd.46: I2S playback enable
[   15.515354@0] aml_snd_m8_card aml_m8_snd.46: IEC958 playback enable
[   15.533027@2] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=e0:b9:4d:d2:ab:6f
[   15.536992@2] RTL871X: module init ret=0
[   15.860741@2] ==> rtl8188e_iol_efuse_patch
[   16.124231@2] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.195502@2] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.502659@2] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.490684@2] libphy: stmmac-0:08 - Link is Up - 100/Full
[   18.490713@2] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   64.509534@0] remote: press ircode = 0x88,
[   64.509577@0] remote: scancode = 0x0019,maptable = 0,code:0x7788bd02
[   64.509628@0]
[   64.840070@0] remote: release ircode = 0x88,
[   64.840112@0] remote: scancode = 0x0019, maptable = 0,code:0x00000000
[   64.840140@0]
[   65.897490@0] remote: press ircode = 0x85,
[   65.897533@0] remote: scancode = 0x0039,maptable = 0,code:0x7a85bd02
[   65.897585@0]
[   66.440028@0] remote: release ircode = 0x85,
[   66.440077@0] remote: scancode = 0x0039, maptable = 0,code:0x00000000
[   66.440105@0]
[   67.336578@0] remote: press ircode = 0x55,
[   67.336621@0] remote: scancode = 0x002d,maptable = 0,code:0xaa55bd02
[   67.336674@0]
[   67.880000@3] remote: release ircode = 0x55,
[   67.880025@3] remote: scancode = 0x002d, maptable = 0,code:0x00000000
[   67.880039@3]
[   69.045000@0] remote: press ircode = 0x84,
[   69.045042@0] remote: scancode = 0x0021,maptable = 0,code:0x7b84bd02
[   69.045093@0]
[   69.370132@0] remote: release ircode = 0x84,
[   69.370177@0] remote: scancode = 0x0021, maptable = 0,code:0x00000000
[   69.370206@0]
[   70.403400@0] remote: press ircode = 0xc3,
[   70.403443@0] remote: scancode = 0x0013,maptable = 0,code:0x3cc3bd02
[   70.403495@0]
[   70.730132@0] remote: release ircode = 0xc3,
[   70.730193@0] remote: scancode = 0x0013, maptable = 0,code:0x00000000
[   70.730221@0]
[   71.655935@0] remote: press ircode = 0xce,
[   71.655959@0] remote: scancode = 0x001c,maptable = 0,code:0x31cebd02
[   71.655987@0]
[   72.101634@0] remote: repeat ircode = 0xce,
[   72.101647@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   72.101661@0]
[   72.209535@0] remote: repeat ircode = 0xce,
[   72.209549@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   72.209555@0]
[   72.317475@0] remote: repeat ircode = 0xce,
[   72.317489@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   72.317503@0]
[   72.425408@0] remote: repeat ircode = 0xce,
[   72.425422@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   72.425428@0]
[   72.533317@0] remote: repeat ircode = 0xce,
[   72.533331@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   72.533338@0]
[   72.641258@0] remote: repeat ircode = 0xce,
[   72.641272@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   72.641286@0]
[   72.749179@0] remote: repeat ircode = 0xce,
[   72.749190@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   72.749196@0]
[   72.857111@0] remote: repeat ircode = 0xce,
[   72.857125@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   72.857131@0]
[   72.965044@0] remote: repeat ircode = 0xce,
[   72.965058@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   72.965074@0]
[   73.072970@0] remote: repeat ircode = 0xce,
[   73.072983@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   73.072990@0]
[   73.180879@0] remote: repeat ircode = 0xce,
[   73.180892@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   73.180899@0]
[   73.288796@0] remote: repeat ircode = 0xce,
[   73.288809@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   73.288824@0]
[   73.396752@0] remote: repeat ircode = 0xce,
[   73.396765@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   73.396772@0]
[   73.504658@0] remote: repeat ircode = 0xce,
[   73.504671@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   73.504688@0]
[   73.612581@0] remote: repeat ircode = 0xce,
[   73.612594@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   73.612601@0]
[   73.720500@0] remote: repeat ircode = 0xce,
[   73.720503@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   73.720503@0]
[   73.828442@0] remote: repeat ircode = 0xce,
[   73.828456@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   73.828471@0]
[   73.936360@0] remote: repeat ircode = 0xce,
[   73.936373@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   73.936379@0]
[   74.044299@0] remote: repeat ircode = 0xce,
[   74.044313@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   74.044319@0]
[   74.152240@0] remote: repeat ircode = 0xce,
[   74.152243@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   74.152243@0]
[   74.260134@0] remote: repeat ircode = 0xce,
[   74.260147@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   74.260164@0]
[   74.368070@0] remote: repeat ircode = 0xce,
[   74.368085@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   74.368091@0]
[   74.476013@0] remote: repeat ircode = 0xce,
[   74.476028@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   74.476035@0]
[   74.583926@0] remote: repeat ircode = 0xce,
[   74.583940@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   74.583954@0]
[   74.691838@0] remote: repeat ircode = 0xce,
[   74.691851@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   74.691866@0]
[   74.799769@0] remote: repeat ircode = 0xce,
[   74.799783@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   74.799789@0]
[   74.907723@0] remote: repeat ircode = 0xce,
[   74.907726@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   74.907726@0]
[   75.015625@0] remote: repeat ircode = 0xce,
[   75.015639@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   75.015645@0]
[   75.220022@0] remote: release ircode = 0xce,
[   75.220039@0] remote: scancode = 0x001c, maptable = 0,code:0x00000000
[   75.220046@0]

Display More

Code

Pivos xios ds for harmony
factory_code    = 0xbd020001
work_mode          = 0
repeat_enable     = 1
;repeat_delay    = 40
repeat_delay = 100
;repeat_peroid   = 39
repeat_peroid = 100
;release_delay    = 150
release_delay    = 100
debug_enable     = 1


key_begin


; Code    = IR keycode
; Linux   = Linux keycode
; Android = Android keycode
; Button  = Description button on remote
;
; Buttons with a * are not mapped to physical buttons on the harmonay remote.
;
; Code    Linux  Android        key id            Harmony          Button
; ----    -----  -------------  ------           -------          ------
  0xe3    30     ; A               61505           none                AudioDelay*
  0xd8    70     ; EXPLORER     61660           none                Browser*
  0xd9    35     ; POWER WAKE   61512           none                CodecInfo*
  0x90    111    ; DEL          61575           none                Delete
  0xd2    108    ; DPAD_DOWN    61569           down                DirectionDown
  0x99    105    ; DPAD_LEFT    61570           left                DirectionLeft
  0xc1    106    ; DPAD_RIGHT   61571           right            DirectionRight
  0xca    103    ; DPAD_UP      61568           up                DirectionUp
  0x84    33     ; F            61510           ffwd                FastForward
  0x95    102    ; HOME         61622           exit                Home
  0xc5    23     ; I            61513           info                Info
  0xd6    46     ; MENU         16838723       menu                Menu
  0x80    113    ; VOLUME_MUTE  61623           none                Mute
  0xe1    38     ; L            61516           none                NextSubtitle*
  0xc2    52     ; .            61486           skip fwd            NextTrack
  0xce    28     ; DPAD_CENTER  61453           ok                Ok
  0xcd    178    ; PAGE_DOWN    61573           channel down        PageDown
  0x9a    177    ; PAGE_UP      61572           channel up        PageUp
  0x85    57     ; SPACE        61472           pause            Pause
  0x88    25     ; P            61520           play                Play
  0x45    116    ; POWER WAKE   61662           none                PowerToggle (map this to sleep, poweroff, power menu or whatever inside kodi.  It won't turn the box on, that needs the original remote signal)
  0x96    51     ; ,            61484           skip back        PreviousTrack
  0xe4    16     ; Q            61521           none                Queue*
  0xd0    14     ; BACK         61448           prev                Return
  0xc3    19     ; R            61522           rewind            Rewind
  0xe0    20     ; T            61524           none                ShowSubtitle*
  0xe5    40     ; APOSTROPHE   61479           none                SmallStepBack*
  0x55    45     ; X            61528           stop                Stop
  0xe2    17     ; W            61527           none                ToggleWatched*
  0x8c    114     ; VOLUME_DOWN  61624           none                VolumeDown
  0xdd    115     ; VOLUME_UP    61625           none                VolumeUp
  0x87    11     ; 0            61488           0                0
  0x92    2      ; 1            61489           1                1
  0x93    3      ; 2            61490           2                2
  0xcc    4      ; 3            61491           3                3
  0x8e    5      ; 4            61492           4                4
  0x8f    6         ; 5             61493           5                5
  0xc8    7      ; 6            61494           6                6
  0x8a    8      ; 7            61495           7                7
  0x8b    9      ; 8            61496           8                8
  0xc4    10     ; 9            61497           9                9


key_end




 repeat_key_begin


         0xdd 115                ;VOLUME_UP
         0x8c 114                ;VOLUME_DOWN
         0x99 105                ;DPAD_LEFT
         0xca 103                ;DPAD_UP
         0xc1 106                ;DPAD_RIGHT
         0xd2 108                ;DPAD_DOWN

Display More

Pitou · January 13, 2017 at 7:44 PM

Gendo

Quote

PROJECT=S905 ARCH=arm make release

Thanks, it works fine!

kszaq,

Just want to say that your build works incredibly well on my Wetek Hub! All my VC1 videos works great now along with some others that didn't work before.

Thank you very much for your hard work!

Pitou!

dssnobie · January 13, 2017 at 7:52 PM

Quote from kszaq

dssnobie The "Unknown command" should not be an issue. Make sure you enable Bluetooth in LibreELEC Settings first.

BT is enabled in the settings. Enabling it was the first I step.

trogggy · January 13, 2017 at 9:13 PM

Quote from kszaq

[hr]
People with remote control issues:

reboot your box

press the buttons that do not work (and note the order of pressing)

post result of the following: dmesg | paste and cat /tmp/remote.conf | paste

I have checked my boxes and all factory remotes work fine, I really need the logs to debug this.

If you need more logs I'll upload one tomorrow - replacing a hot water tank is taking priority tonight.

goooo · January 13, 2017 at 9:35 PM

kszaq
TX3 Pro s905x 1g:
No buttons on the remote do seem to work.

This is my key sequence:
1. Power
2. OK
3. Up
4. Down
5. Left
6. Right
7. Menu
8. Home
9. Return
10. Mouse
11. Vol-
12. Backward
13. Forward
14. Vol+

Code

[  139.243325@0] remote: Wrong custom code is 0xae517f80
[  152.309825@0] remote: Wrong custom code is 0xf20d7f80
[  156.005909@0] remote: Wrong custom code is 0xd9267f80
[  157.623762@0] remote: Wrong custom code is 0xd7287f80
[  159.095932@0] remote: Wrong custom code is 0xda257f80
[  160.314498@0] remote: Wrong custom code is 0xd8277f80
[  168.907225@0] remote: Wrong custom code is 0xb6497f80
[  171.863495@0] remote: Wrong custom code is 0xac537f80
[  176.880002@0] remote: Wrong custom code is 0xe41b7f80
[  179.581283@0] remote: Wrong custom code is 0xad527f80
[  281.643591@0] remote: Wrong custom code is 0xa9567f80
[  284.327064@0] remote: Wrong custom code is 0x42bd7f80
[  286.502925@0] remote: Wrong custom code is 0x44bb7f80
[  288.769673@0] remote: Wrong custom code is 0xb14e7f80

Display More

dmesg: BHRf
/tmp/remote.conf: heZa

**kszaq** · January 13, 2017 at 10:08 PM

goooo You have a wrong remote.conf.
[hr]

Quote from niabi

But I want to go a step forward and remove kodi from your builds and have it boot something else, like retroarch (basically the same I am doing now but without kodi at all) but I am stuck on how to do that in your source code, could you point me in the right direction? Or this is simply not possible?

It's certainly possible but I don't know how to do this, sorry.

niabi · January 14, 2017 at 3:03 AM

Quote from kszaq

goooo You have a wrong remote.conf.
[hr]

It's certainly possible but I don't know how to do this, sorry.

OK, thanks for the reply! I will keep looking

Sent from my Lenovo K50-t5 using Tapatalk

rbXtnc · January 14, 2017 at 4:52 AM

My box freezes when cleaning the library, not an issue for me, anyone else?
***Edit*** Shouldn't say freeze, but the gui locks up you cant do anything to get out of the Cleaning Library Window, sound still works, and ssh works.
Running:
LibreELEC (community) Version: 7.90.beta1-temp_sensor_disabled
LibreELEC git: 869b1877659a52fb98a8d02b2d0b41d1d4b088a9

No big deal from me just thought it may be a bug, and reporting.

jakotaki007 · January 14, 2017 at 9:38 AM

Hi Guys.
It's normal that when i'm watching movie with TrueHD 7.1 and stopped it and then resume it, there is no sound?
Only skipping beetwen 5.1/7.1 for about 5-10 second and then skipping frames, freezes etc. . And it's no defference if i'm watching by Receiver ( Onkyo 808 HDMI ) or TV directly ( HDMI )

**mmpp** · January 14, 2017 at 10:10 AM

Now in the correct thread:

Did some testing of Beta1 on my wetek hub yesterday. I was surprised how well this version coped with my file collection and tv setup.

no problematic files found (hevc main and main10, h264 both 8 an 10 bit, mpeg4 in mkv and mp4 containers), chapter and manual skipping worked fine. Will continue testing with some of the older files (divx5, ogm and avi containers)
MPEG-Dash with the latest inputstream for raspberry pi2 from kodinerds.de works fine with the youtube plugin (1080p youtube, yay!)
twitch.tv plugin works fine, but I had one hiccup: when I selected a live stream that I played before, it offered to "continue at X:XX" (the duration of the last time I viewed it) and when I selected it, the box froze completely. Never saw this on Jarvis, but suspect the plugin as source of the problem. Sadly, it is not easily reproduced
PVR with the tvheadend plugin works flawlessly, tested SD mpeg2 (576i), HD (h264 720p and 1080i) and 4k DVB-S2 transmissions). Channel switching times are slightly more than the latest Jarvis version
all remote buttons worked

Did not test audio passthrough yet. Cannot reproduce the problems from jakotaki007 with my TrueHD7.1 files when using kodi software decode to 2-channel hdmi.

EagleEyeX · January 14, 2017 at 10:26 AM

Kszaq i can only say very much for your hard work great builds

[8.0.2e] LibreELEC 8.0 for S905/S905X

Similar Threads

List of S905/S905X Boxes that work with kszaq's build

Custom update Channel for S905/S905X