Hi!
This box works very well with 8.2.0.1 (Except Live TV):
Zenoplige Z11 Pro - S905X - 2GB/16GB
Tested running from microSD & installed internaly. Both OK!
To resolve the Live TV stuttering I upgraded to: LibreELEC-S905.arm-8.2-devel-201710311040-g99798df-I.tar
Details on this post: Live-TV stuttering since 8.1.9
Just bought an Akaso TX95 from UK auction site, 2Gb RAM, 16Gb storage, dual band WIFI for less than £30. I was expecting the cheap WIFI chip but was pleasantly surprised when LibreElec booted with dual band WIFI. Everything works fine. I would recommend this box condidering the spec for the price.
Just bought an Akaso TX95 from UK auction site, 2Gb RAM, 16Gb storage, dual band WIFI for less than £30. I was expecting the cheap WIFI chip but was pleasantly surprised when LibreElec booted with dual band WIFI. Everything works fine. I would recommend this box condidering the spec for the price.
I might take a punt on that, I think I see the one you mean (although not Akaso)...
Just bought an Akaso TX95 from UK auction site, 2Gb RAM, 16Gb storage, dual band WIFI for less than £30. I was expecting the cheap WIFI chip but was pleasantly surprised when LibreElec booted with dual band WIFI. Everything works fine. I would recommend this box condidering the spec for the price.
Does HDMI CEC work OK?
Does HDMI CEC work OK?
Not on my 2009 Panasonic plasma, but neither does my S805 MXQ or my MK808b+ so maybe it's the television.
Just bought an Akaso TX95 from UK auction site, 2Gb RAM, 16Gb storage, dual band WIFI for less than £30.
Excellent box.
Re-used remote from Hannspree RC00147P following this to make it really usable (there is nothing wrong with its own remote!, just like to have more buttons in OE)
The box seems to also "accepts" power from USB connector (power leaks back in) from powered USB3 hub
I did not like it (as I have the units power on in-line switch, so can hard power it off), so just blanked the 5V VBUS with a strip of electrical tape
Plays anything thrown at it
Display MoreExcellent box.
Re-used remote from Hannspree RC00147P following this to make it really usable (there is nothing wrong with its own remote!, just like to have more buttons in OE)
The box seems to also "accepts" power from USB connector (power leaks back in) from powered USB3 hub
I did not like it (as I have the units power on in-line switch, so can hard power it off), so just blanked the 5V VBUS with a strip of electrical tape
Plays anything thrown at it
Agreed, for the price this is an excellent box. 2GB RAM and 16GB storage and runs LE perfectly. Great value.
I have 2 boxes:
Sunvell T95N 2GB/8GB, works great. I think that LE7 didn't have wifi. On the latest build of LE8 (8.2.2.2) Wifi works just fine.
Sunvell T95M 2GB/8GB, again works great, currently on LE7 and I don't plan to upgrade as LiveTV in Jarvis works a lot better and faster. The only gripe is that the front LCD doesn't work.
I think neither have access to the internal NAND (running them from an SD card), but I don't mind that.
if i was looking for a box to run strictly LE and handle most media types without issues a model and link would be GREAT!
Thanks
Pretty much any of the S905X boxes mentioned as working in this thread will do the job.
I recommend getting one that has 2GB of RAM.
Any chance someone can clarify that the box I would get is on to run standalone LE. I thought I read somewhere that someone said they don’t advise flash the nand and running from that?
Thanks
Recently I compared my 2 boxes, both connected via ethernet cable and samba server (W7 and W10 PC):
Beelink Mini MXIII (S905) - 1Gbit ethernet
Vontar Mini M8S II+ (S905x) - 100 mbit ethernet
S905X box is unable to play Jellyfish testing videos 40 mbit and above without frequent buffering issues.
I am a bit disappointed, expected to play files at least 60 mbit videorates smoothly via S905X 100 mbit ethernet interface.
On the S905 Box I can play 200 mbit test files without buffering (decoding is not fast enough, of course, but no buffering issues).
Is this normal, or my S905X box has some problem?
Is this normal, or my S905X box has some problem?
Often written ....
1. problem = samba
2. problem = network
Try NFS mount and GBit USB network adapter -> jellyfish will play smooth @140mbit
Often written ....
1. problem = samba
2. problem = network
Try NFS mount and GBit USB network adapter -> jellyfish will play smooth @140mbit
Thank you Tim. I have ordered the USB adapter, will re-test after it arrives 
The Coowell V5 works with the Kszaq build but needs the coowell V5 dtb when installing to nand
No problems at all when running from SD and no problens installing to nand using the DTB for the coowell.
I have an Sammix R95 1gb/8gb kszaq builds work flawless. Getting some problems with a NTFS hdd connected via USB, but I think the problem is related to old kernel + NTFS. Will try with a native linux file system.
Will try with a native linux file system.
You will be going backwards with that plan.
