LE already supports CVBS output on H2+, H3 and H5, it's just not enabled by default. That can be done by enabling appropriate DT TVE overlay in extlinux.conf. Currently overlays for enabling TVE exists for H3 and H5, but it would be trivial to add overlay for H2+ too. Note, H2+ is not officially supported in LE.
Thank you 
I see that you were the author of the armbian orange pi zero patch
Yes. Kodi also works with it
I see that you were the author of the armbian orange pi zero patch
Not really. If anything, then someone ported my patch to Armbian.
Can anyone confirm whether the H3 _analog_ audio out is working with Kodi v10 or v11?
For audio, these steps might or might not be needed
But definitely, turn up the volume from within the audio/video player.
People,
I have been working on CVBS for the orange pi zero, based on the 0036 patch from this project. Details about my experience:
If anyone wants to try it and comment about what is missing, comment here or there, and I will share my 3 patches.
Please, I need armbian to have all the power I have seen in Kodi+Orangepizero:
* cvbs (working with overscan, but I set the Kodi interface zoom to -10% 😹)
* splash graphic at boot
* text console at boot, not just for login prompt (probably this is some kernel argument)
* hardware h264 (I have not tried this yet)
* shaders (and probably 3d).
LE already supports CVBS output on H2+, H3 and H5, it's just not enabled by default. That can be done by enabling appropriate DT TVE overlay in extlinux.conf. Currently overlays for enabling TVE exists for H3 and H5
Can you elaborate this a tiny little more?
I have a Orange Pi PC (H3) and my extlinux.conf has the following content:
LABEL LibreELEC
LINUX /KERNEL
FDT /sun8i-h3-orangepi-pc.dtb
APPEND boot=UUID=1803-4024 disk=UUID=f4b846f8-36dd-4f2d-88ab-07c68ec7d52a quiet console=ttyS0,115200 console=tty1In the overlays folder I have a file called sun8i-h3-tve.dtbo which doesn't sound wrong but how to "activate" it?
You have already written a post within the last 2,400 seconds. You must wait at least 1,824 seconds before attempting to write a new post.
On top of: Newly created posts will remain inaccessible for others until approved by a moderator.
Use search function
Well - the forum software is quite poor (imho) which sadly includes the search function. That said I did a much broader search than only this forum and even ended up on the docs from extlinux. The Libreelec WIKI on the other hand was no help of all and by the looks of it has a lot's of old/not valid docs (maybe partly because of the low engagement in this community)
Ended up with this config here:
LABEL LibreELEC
LINUX /KERNEL
FDT /sun8i-h3-orangepi-pc.dtb
FDTOVERLAYS /overlays/sun8i-h3-tve.dtbo
APPEND boot=UUID=1803-4024 disk=UUID=f4b846f8-36dd-4f2d-88ab-07c68ec7d52a quiet console=ttyS0,115200 console=tty1
But CVBS didn't output a thing. Anyway I'm finished with libreelec and have a working setup already with coreelec (other hardware). The community over there is very welcoming (opposite I experienced here) and also has the state-of-the art forum software (discourse) which doesn't comes with the pack of restrictions this community has like:
0100 Only use the Website and Forum Feedback section for general suggestions.
0100 Only use the Website and Forum Feedback section for general suggestions.
Must be something in the air today. Not the first forum bashing post I’ve read. All I can say is hats off to you guys for your patience.
"You can please some of the people some of the time" 
Hey, guys, I have some problem with EPG not showing on my mobile apps devices whereas it shows in the Kodi itself.
I know maybe this is not the right place to ask this question, but maybe some of you have ever resolved such issue and could help me too, please?
So, it worked for me in old days when there was no stable versions of Kodi 20 and I have been using RC and nightly images and etc.
But when I updated to final 20.1 this thing happened to me on all of my mobile devices and its very uncomfortable now...
I am using PVR IPTV Simple Client and official Kodi Remote apps on my mobile devices.
Any help is highly appreciated!
Since a few weeks I get a green screen watching disney+ with HEVC streams on my pineH64. When i dissable HEVC (h265). I switched back to H264 for now. I didn't test other HEVC files/streams so not exactly sure if it's due to Disney+ or LE or a hardware problem. I see if I can upload the log this evening.
I tested HEVC on H6 multiple times this week and it worked fine. Please test with some HEVC sample first. If that works, then it's most likely addon issue.
I found some time to test HEVC with HEVC samples and it works great. So it's most likely a problem with the disney+ addon.
Hey, Jernej, please let me know on which boards the Wi-Fi is working the most stable? (with mainline driver) I am going to obtain a new board and I need a working Wi-Fi on it too. Thanks for your hard work!
Please let me know if Wi-fi works on Orange Pi 3? I am able to buy such and I see it has Sparclan and not Realtek.
Guys, anyone?
And also does Wi-fi work on Orange Pi 3 LTS?
