[8.2.4.1] LibreELEC Kodi Krypton - S905 & S912 devices

yes the srt subtitle is fixed .... and smb does work for me you have to change settings in the service then network ... set min to smb_V1 and max to smb_v3

Srts as well as SMB have been working fine for me, without any tweaking. SMB is set to v2 min, v3 max (default)

Hey Wrxtasy.

Just wanted to ask if the CoreElec builds contain all your fixes for S912 devices, since I own a Minix U9.

The reason Id like to install CoreElec is for auto update to the newest CoreElec version (assuming it is implemented there).

Thanks for your builds anyways.

- Mr.Brown

AFAIK, CE.8.90.3 uses new kernel and has all latest fixes for S912. It does not have the option to overclock GPU from Kodi menu, but you can overclock it with autostart.sh, just as well. It also has functional auto update...

If you plan to install CE.8.90.3 version, I suggest you do a fresh install due to many changes and fixes.

Thanks wrxtasy you fullfill your promise for build s905x thanks once again.

Thanks for your great build, no stuttering in s905x. Minimum subtitles stuttering is dispeared (first line stuttering). Thanks for your great build. All format plays flawlessly (720p, 1080p, 4K etc). One issue I observe that how to disable noise reduction. There is no option available in setting to disable noise reduction because noise reduction set on as default.

Quote from wrxtasy

TEST RELEASE S905 / S905D / S905X / S905W:

The following folder contains a v8.2.4.2 S905 test release until i can do a "Clean" compile overnight:

Kodi-Krypton-AMLogic

A special ODROID C2 version (64bit compatible with Official LE) is found:

LibreELEC-Odroid_C2.aarch64-8.2.3.-GUI-options.tar

---

Requirements if upgrading from a kszaq version:

a) if something does not quite work, also copy a relevant .dtb file into the Update Folder when doing a .tar update (no need to rename)

and

b) SSH in and issue:

Code

touch /storage/.update/.nocompat

Notes:

There are extra Kodi options found in: (read the explanations at bottom of Kodi settings screen)

Settings > System > AMLogic

Settings > Player > Videos > Disable Auto Resolution ...

S905W devices are limited to 4K @ Max 30Hz and can only clock the GPU to 666 MHz

S905W devices also require (for OTA TV viewing) - Deinterlaced (picture) Post Processing to be Disabled in AMLogic settings

W.

Display More

HI wrxtasy wetekdvb not work i have wetek play2

i test this but not tuner found in tvh

no problem here with Me

just downloaded right now

The kernel that you use is based on the one of coreelec or kzasq?

Is there any SSH command to check temperatures ?

I have been testing the S905/S905x devel build and must say I'm very impressed.

Ever since the early days of 8.x kszaq builds, I always had slight, infrequent, but sometimes noticeable stutter on 720p/25p content only. I always used the settings of turning "adjust refresh rate" off and "sync playback to display" on. I'm in the UK, and all our TV series are 25p. I find with this setting I have very smooth playback of 23.976p, 24p and 25p content. I'm quite happy with stereo sound (don't care about passthru audio) from the TV so this setup works really well. Don't have AVR system etc.

Anyway, so far I have not seen any stutter at all (this is not subtitle stutter, but general video stutter I'm referring to). I've tried a few episodes of 25p UK TV and some 23.976p US TV and movies. So far, the picture is very smooth.

I have noticed that memory consumption is higher compared to kszaq's builds. It appears that video/audio is cached a lot more and I'm guessing this causes the memory usage to increase (so far to a max of 32% - I have 2GB ram box). It's not a problem, just an observation - maybe this helps with playback smoothness??

Once again, congrats on a super smooth build!!

Great great build (S905X) in every aspect, I m very impressed.

Quote from sertem

Display Spoiler

[8.2.4.1] LibreELEC Kodi Krypton - S905 & S912 devices

Code

Can not download for s905

Quote from kamacnik1

no problem here with Me

just downloaded right now

I can not open the file exchange mega.nz

my internet block it if you can transfer it to another storage

Yandex, Google, etc.

Quote from punkid

Is there any SSH command to check temperatures ?

cputemp

or if you want to check it every 30 seconds

watch -n 30 cputemp