I'm running 8.2.2.3 from SD card on H96 Pro Plus. Using the remote.conf I posted before. No troubles with powering up or shutting down the device.
Could you post the link to the remote.conf you're using, please? I can't find it! 
Remote power trouble
-
tyrol_gangster -
January 24, 2018 at 8:54 PM -
Thread is Unresolved
-
-
-
Most important thing here is the Android ROM with the "u-boot" component.
Not LE dtbs and remote.confs...
-
Most important thing here is the Android ROM with the "u-boot" component.
Sure?
With shutdown from Android I can start my Box without any issues to Android or LE with my Remote control. What ever I want.
But when shutdown from LE, I can't start my H96pro+ over my Remote control! I can only start the box when I'm plug off/on the power cable!
For my opinion this is an LE issue!?
Paul
-
For my opinion this is an LE issue!?
Rule #51: sometimes You are wrong
Believe it, or not believe it
-
LibreELEC implements standard shutdown procedure provided by Amlogic. Every quality box (WeTek, Minix etc.) can properly use it.
An issue is that your box manufacturer implemented some unknown way of shutting down to save a few $cents on building firmware. We don't know how it works and it's highly unlikely a workaround will ever be implemented because developers don't know how it works and don't have hardware that has this issue.
Please ask the box manufacturer to either release source code to implement it or provide a fixed bootloader.
-
For the H96 Pro Plus, is there firmware that can be flashed that could help resolve this issue?
-
I don't know if this will work, but there are a couple of roms at Freaktab
-
Ok, thanks, i will need 2G/16G, but maybe worth a shot. It does not say AlfaWise on it, so risk some hardware is different, but may give it a go
-
Sadly, but it will NOT work.
-
Sadly, but it will NOT work.
Ok, so I would need the firmware for this exact manufacturer?
-
I don't know if this will work, but there are a couple of roms at Freaktab
I have been using Superceleron`s rom since the very first for H96 PRO+. It has never worked properly for me... but hey, my Raspberry Pi3 also does not shutdown so I just leave it on and don`t care. Would not leave the H96 PRO+ running non stop, at some point it will burn my apartment down
-
I am so glad I only have a H96 Pro, power button works, I leave it plugged in but powered off.
And, it won't burn my house down.
-
I put a custom 7.1.2 firmware from Shonk on there, and while Android works and boots fine, still unable to power on from LibreElec.
-
I doubt that it will be just that easy. Even if it really works on his device we will need to get it to something like this
-
there have been users on this forum ( zed85 ) claiming they don't experience the same issue, which is why I believe there has to be a solution that does not include trashing the whole thing
It would seem our only hope here at least in the short term is for zed85 to confirm what Android ROM version he has on his box. I would still like to know which dtb.img he uses, too, although it has been said that it is most likely irrelevant to the issue.
I tried to install libreelec to internal memory but that failed. so I am not running a working android version on the box anymore.
I'm just running libreelec from SD card.
See the following post for the remote.conf I am using right now.
Also shutting down the device (H96 pro plus s912) with the remote works.
-
What hardware revision is your H96pro+ box, green or blue PCB (circuit board colour), is it Alfawise or other manufacturer, share as much details you can.
