[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices

Quote from afl1

This PR need in kernel enable CONFIG_POST_PROCESS_MANAGER_3D_PROCESS. Current settings is not set.

Code

LibreELEC:~ # cat /sys/class/ppmgr/ppmgr_3d_mode
cat: can't open '/sys/class/ppmgr/ppmgr_3d_mode': No such file or directory
LibreELEC:~ # ls -l /sys/class/ppmgr/

After enabling this option:

Code

LibreELEC:~ # cat /sys/class/ppmgr/ppmgr_3d_mode
current 3d mode is 0x0
LibreELEC:~ #

is CONFIG_POST_PROCESS_MANAGER_3D_PROCESS a parameter, which must be set during compilation (-> new release from GDPR-2)

or can I set this in a file on my LE-SD-card (e.g. /flash/boot.ini) to activate?

Quote from afl1

Only for obsessive updaters.

Version 1.1.1 with fixes:

- reboot from nand;

- audio passthrough;

- libbluray 1.0.2.

LibreELEC-S905.arm-9.0-devel-20171221221454-r27723-gf46dcd5.tar

Display More

Hi,

been using that build for a few days now on a 905D box (KI pro). Works well but funny thing is if auto update is on, it keeps downloading update for 912 box. Any ideas what is wrong?

TIA

Quote from adamg

You won't be able to unfortunately, you could maybe try the latest nightly release though.

i have try almost all android releases but nothing is working

question, when i use amazon prime, video is decoded in software and its slow, but on android video is decoded using hardware and plays super fast can this be fixed

Quote from DoktorX

question, when i use amazon prime, video is decoded in software and its slow, but on android video is decoded using hardware and plays super fast can this be fixed

can't be fixed. netflix and amazon is always sw decoded.

Quote from adamg

I have Tanix TX3 mini with Wi-Fi chip sv6051p. Wi-Fi works with LibreELEC-S905.arm-adamg-1.0.8 and LibreELEC-S905.arm-8.90.10-K. With LibreELEC-S905.arm-adamg-1.1.0(and later builds)/LibreELEC-S905.arm-8.90.0 WiFi doesn't work any more.

I need more information, can you provide a copy of your dmesg

LibreELEC-S905.arm-8.90.10-K build WiFi works: EVUM

LibreELEC-S905.arm-8.90.0 build WiFi doesn't work: AfYW

Quote from adamg

This has been covered many times there is no hardware decoding for libwidevine (yet) it's not something that is likely to get address any time soon.

This is only apply for libreelec right ?since on android i have hw decoding of amazon but maybe this because i have widevine l1 drm support on box and im not using libwidevinecdm.so

Quote from DoktorX

This is only apply for libreelec right ?since on android i have hw decoding of amazon but maybe this because i have widevine l1 drm support on box and im not using libwidevinecdm.so

Currently there is no way to use Widevine with hardware decoding on pure Linux, e.g. LibreELEC.

Do you confirm upgrade from 8.2 (kszaq builds) to your builds with .tar and Update share is possible ? Thank you !

Quote from NicCo

Do you confirm upgrade from 8.2 (kszaq builds) to your builds with .tar and Update share is possible ? Thank you !

Yes, it is possible. After reboot starts a migration of DB an Addons, please wait the needed time

Quote from afl1

This PR need in kernel enable CONFIG_POST_PROCESS_MANAGER_3D_PROCESS. Current settings is not set.

Code

LibreELEC:~ # cat /sys/class/ppmgr/ppmgr_3d_mode
cat: can't open '/sys/class/ppmgr/ppmgr_3d_mode': No such file or directory
LibreELEC:~ # ls -l /sys/class/ppmgr/

After enabling this option:

Code

LibreELEC:~ # cat /sys/class/ppmgr/ppmgr_3d_mod@
current 3d mode is 0x0
LibreELEC:~ #

afl1:

I managed to compile my own LE-version now (based on GDPR-2 's git-version)

But I need one hint: which file does contain the kernel-option CONFIG_POST_PROCESS_MANAGER_3D_PROCESS you described?

I want to set it and recompile again, to see if 3D-autoswitch will work then...

Quote from pepeq

afl1:

I managed to compile my own LE-version now (based on GDPR-2 's git-version)

But I need one hint: which file does contain the kernel-option CONFIG_POST_PROCESS_MANAGER_3D_PROCESS you described?

I want to set it and recompile again, to see if 3D-autoswitch will work then...

This option is already set in current sources. Verify it with cat /sys/class/ppmgr/ppmgr_3d_mode

Enabling CONFIG_POST_PROCESS_MANAGER_3D_PROCESS will most likely cause a crash and it is not needed to make 3D autoswitch work, at least it is not enabled in my builds and it reportedly works.

Quote from kszaq

Enabling CONFIG_POST_PROCESS_MANAGER_3D_PROCESS will most likely cause a crash and it is not needed to make 3D autoswitch work, at least it is not enabled in my builds and it reportedly works.

Ok. I reverted this option to disable.

I guess this was broken somewhere during Kodi development as it started to work right after Memphiz's PR was merged to Krypton.