[8.2.2.3] LibreELEC 8.2 for S912

Quote from kszaq

As far as I can tell eMMC clock is determined by Amlogic driver depending on what is supported by eMMC chip. So far it works, I am geting decent R/W rates. I will not touch that code to not break anything.

For example on one of my devices it runs at 200MHz, 8-bit:

Code

[    2.396176@2] emmc: new HS200 MMC card at address 0001
[    2.411137@3] emmc: clock 200000000, 8-bit-bus-width

thanks

was that 200mhz ddr or sdr

i presume sdr due to the 200 clock and HS200

"resolution switching - only 1920x1080 and 4K is working (frame rate switching works"

it means that you can play videos only in 1080p or 4k resolution (not 720p or other values)?

Quote from kalebroc

Hi guys,

I haven't been around for awhile and had posted before about the Sunvell T95Z 2GB / 16GB box that I have and the fact that I can't get the Ethernet port to work under Libreelec. So over the course of today I have tried every dtb file for the S912 one by one and none will work. I can get the wireless to work but prefer wired connection. I am at a loss here and was hoping somebody had got access to the dtb file from the above mentioned box. The Ethernet port works fine when I revert it back to android so it's not a hardware issue. Thanks guys.

I had the same problem. Changed cable that worked. But not through switch only direct to router.

Quote from failax

"resolution switching - only 1920x1080 and 4K is working (frame rate switching works"

it means that you can play videos only in 1080p or 4k resolution (not 720p or other values)?

I'm also a bit mystified by this - though I'm probably misunderstanding too. 720p movies seem to play fine for me.

I read that Kodi 17.4 supports 3D MVC with menus

Is that correct?

is Kodi 17.4 incorporated to the LibreELEC or it is just Android?

Thanks

and I hope I'm not mixing stuff here

Quote from Bonzo

I'm also a bit mystified by this - though I'm probably misunderstanding too. 720p movies seem to play fine for me.

I hope to have a reply soon, i'm interested in BB2 mecool s912 that seems to work fine even with wifi module.

@jkjelds

@kszaq

Thank you both for the reply, I have tried both your suggestions already but I will definitely try them again, hopefully will get a chance later today and let you know.

Thanks again.

Hi Guys,

does anyone know how to switch from shutdown to standby?

By default Libreelec will shutdown completely when pressing the poweroff button on remote. Even in Kodi Menu there is no Standby Option.

Thanks,

Boyz

kszaq I'm running H96 pro plus, with LibreELEC-S912.arm-8.2-8.1.9 and gxm_q200_3g.dtb, don't notice to many issues other than the remote don't work, and the blue power light on the front of the box dosent work, other than that it seems to running great, and I justwanna say thanks for all your work, its really appreciated :)...I download the remote.conf-h96pro, where in config files folder do I put this file?

EDIT: just had to rename it to remote.conf, so that's working now, thanks guys, now if any1 has a tip how to get the blue light on?

Quote from skyhigh69

Now if any1 has a tip how to get the blue light on?

That's a feature, not a bug

Guys is it possible to install chromium on LibreELEC ? I have Tanix TX3 mini with S905W running the LibreELEC build in this thread

Quote from hillz

Guys is it possible to install chromium on LibreELEC ? I have Tanix TX3 mini with S905W running the LibreELEC build in this thread

You're running a S912 build on an S905 device? Well done! ;-P

Quote from Forage

You're running a S912 build on an S905 device? Well done! ;-P

Oh gosh I didn't read the thread name very well, I mean the libreelec build for my S905 device

I'm running a v8.1.6 still on mine on the internal memory, what's the easiest way to update to the newest version.

Quote from stolla

I'm running a v8.1.6 still on mine on the internal memory, what's the easiest way to update to the newest version.

I guess it's the same method, check the FAQ : [HOWTO + FAQ] Install community builds on S905/S905X/S912 device