7.0.3.011 build for S905/S905X


  • I got you covered!

  • 'You're like a child who wanders into the middle of a movie and wants to know -..' ~ Walter Sobchak (The Big Lebowski)

    Edited once, last by atreyu ().

  • I got you covered!



    Thank you


    I'm now having an issue with all movies where the Screen refresh changes. Whenever it goes up say to 1080p or 3120 (4K) My TV changes resolution but the image does not fit the screen its as if the image has enlarged and gone off-screen.


  • Hello,


    When I'm watching Live Tv, and push the back button to go to the home screen the HDMI signal goes away for some seconds, same thing when I do the contrary, frome home screen to Live Tv? How can I solve this?


    regards, Jefken.


    Are you sure this is not just refresh rate adjusting?


    By default, Kodi will try and do just that on start-stop, which takes a moment.
    Find the setting at: system-settings -video (guessing here) adjust display refresh rate - try and set to off

    'You're like a child who wanders into the middle of a movie and wants to know -..' ~ Walter Sobchak (The Big Lebowski)

    Edited once, last by atreyu ().


  • I'm still using " 7.0.3.009" on my Mini M8S II and I wondered if the passthrough issue has been mentioned or even resolved in this build or the previous one.
    Dolby TrueHD and DTSHD Master Audio are send correctly to my Denon AVRX1200WBKE2 but I have an issue with DTSHD High Resolution because only the DTS core is send to my AVR. Using my WD TV Streaming Media Player the same file shows DTSHD HR correctly on the display.
    Has there been made progress I missed out reading about?


    My box is very similar (or identical) to your Mini M8S II.
    I played two short DTS-HR 7.1 samples from demo-world.eu. My Onkyo AVR showed DTS-HR on its screen and all channels sounded OK.

    Running kszaq's LibreELEC 8.2.2.3 and adamg's LibreELEC 9.x 1.0.6 on Cooleme MB1 (S905X - 2GB/8GB)


  • I see there has been placed a ZIP file to flash via recovery:
    LibreELEC-S905.aarch64-7.0.3.011.zip


    Can I use this to install over a previously installed LibreELEC-Amlogic.aarch64-MiniMX-7.0.2.005-update.zip ?


  • I see there has been placed a ZIP file to flash via recovery:
    http://kszaq.libreelec.tv/s905/7.0.3.011....3.011.zip


    Can I use this to install over a previously installed http://www.amlinux.ru/image/905/7.0.2.00...update.zip ?


    This ZIP will wipe your data. You can try using normal update method but I can't promise it'll work. "AMLinux.ru" are not my builds and I don't know what's in them. Remember to use 64-bit build when updating.

    Edited once, last by kszaq ().

  • This ZIP will wipe your data. You can try using normal update method but I can't promise it'll work. "AMLinux.ru" are not my builds and I don't know what's in them. Remember to use 64-bit build when updating.


    Thank you for the quick responding! A few more questions before I flash your build...
    When I flash your zip trough recovery, will I be notified when a new build is available?
    And does your build include everything needed for Mini Mx to work (Beelink Mini MX TV Box Android 5.1 Amlogic S905) ?

    Edited once, last by zed85 ().

  • This screen issue really has me scratching my head. I've tried on my other plasma telly which has same problem when changing from menu 720p to 1080p movie.


    I've taken pictures on my 4k TV to give you an understanding of whats happening. One image is me in the menus system by video calibration where tv goes to 720p and you can see in background what the Image of movie should look like. When Kodi does its refresh change it loses the picture as if its zoomed in. I've checked all my tv settings as i calibrated the TV everything like overscan etc was already disabled / off. I have no explanation on why it is doing this.


    Apologies for this blurry pictute.


  • Can you update to 11 from 09? or you need to jump to 10 first?


    Yes.
    Keep in mind the addon cache remark in OP when switching architecture (32/64).

    'You're like a child who wanders into the middle of a movie and wants to know -..' ~ Walter Sobchak (The Big Lebowski)

  • Hello,


    What about higher then 48kHz audio resolution through SPDIF connector?
    I had 96kHz in 006 FW and now it is only 48kHz.
    Is that purpose action?

  • Sorry if this is a 'dumb' question...


    But why would I use this as opposed to the 'official' build? I'm running 009 at present on a WeTEK Play 2 but considering this one as it appears to have a couple of issues.

  • Yes.
    Keep in mind the addon cache remark in OP when switching architecture (32/64).


    What does that mean? how do I know if i need or can use the 32bit? whats the diff?


    Edit : I got the s905x beelink minimxiii ii

    Edited once, last by vitalero ().


  • When I flash your zip trough recovery, will I be notified when a new build is available?
    And does your build include everything needed for Mini Mx to work (Beelink Mini MX TV Box Android 5.1 Amlogic S905) ?


    No. There is no auto-update feature.


    Because you no longer have Android, you will have to supply remote.conf to make stock remote control work. Here's one from Alex's build: remote.conf


    This screen issue really has me scratching my head. I've tried on my other plasma telly which has same problem when changing from menu 720p to 1080p movie.


    I've taken pictures on my 4k TV to give you an understanding of whats happening. One image is me in the menus system by video calibration where tv goes to 720p and you can see in background what the Image of movie should look like. When Kodi does its refresh change it loses the picture as if its zoomed in. I've checked all my tv settings as i calibrated the TV everything like overscan etc was already disabled / off. I have no explanation on why it is doing this.


    Apologies for this blurry pictute.


    LibreELEC


    Sorry if this is a 'dumb' question...


    But why would I use this as opposed to the 'official' build? I'm running 009 at present on a WeTEK Play 2 but considering this one as it appears to have a couple of issues.


    Official builds are Kodi Krypton, this build is Kodi Jarvis (LE7). Also there is no support for WP2 DVB tuners in my build.


  • I played two short DTS-HR 7.1 samples from demo-world.eu. My Onkyo AVR showed DTS-HR on its screen and all channels sounded OK.


    As I understand you are using this build (11) ? So you haven't used (9) and seen the problem I described? Because every single DTSHD-HR movie is doing this DTS core extraction and I want to be sure before updating because I would have to do all my configurations again which would take me hours.

  • As I understand you are using this build (11) ? So you haven't used (9) and seen the problem I described? Because every single DTSHD-HR movie is doing this DTS core extraction and I want to be sure before updating because I would have to do all my configurations again which would take me hours.



    Why can't you just use the LiBreELEC backup and restore function??
    [hr]

    As I understand you are using this build (11) ? So you haven't used (9) and seen the problem I described? Because every single DTSHD-HR movie is doing this DTS core extraction and I want to be sure before updating because I would have to do all my configurations again which would take me hours.



    Why can't you just use the LiBreELEC backup and restore function??
    [hr]
    I don't quite understand the instructions. I want to go from 011 32 bit to 009 64 bit.
    I don't have any USERDATA or addons installed.
    011 is installed on NAND.
    Can I just boot from sd card with 009 and then installtointernal??
    [hr]
    I don't quite understand the instructions. I want to go from 011 32 bit to 009 64 bit.
    I don't have any USERDATA or addons installed.
    011 is installed on NAND.
    Can I just boot from sd card with 009 and then installtointernal??
    [hr]
    Why are my posts coming up twice??
    [hr]
    Why are my posts coming up twice??

    MXQ M10 S805 - LibreELEC 8.1.9
    NEXBOX A5 S905X - LibreELEC 8.1.9
    BEELINK MXIII II S905X - LibreELEC 8.1.10

    Edited once, last by kodiuser1 ().


  • What does that mean? how do I know if i need or can use the 32bit? whats the diff?


    Edit : I got the s905x beelink minimxiii ii


    Please read the opening post. This is described in detail by kszaq. Really hard to go wrong ;-)
    The main difference betwen the 32/64 build is memeory management. There's a hard-to-solve- issue on 64bit that does not seem to be present in 32bit builds.


    I got this information in this very thread or the last release thread. If you are interested all your questions are anwered already.

    'You're like a child who wanders into the middle of a movie and wants to know -..' ~ Walter Sobchak (The Big Lebowski)

    Edited once, last by atreyu ().