I have problem, could not connect to Libreelec repository
[8.2.3.1] LibreELEC 8.0 for S805
-
kszaq -
October 28, 2016 at 10:45 PM -
Thread is Unresolved
-
-
OP updated with a new build. Please read known issues carefully. Addons are being built right now and I'll update my repo shortly.kszaq please also update truecrypt addons from unofficial openelec
truecrypt github -
PVR IPTV simple client does not recognize the group of channels in the playlist, i have only ALL CHANNELS
Edit: Settings PVR & Live TV, enable synchronise channel groups with backend
-
Help needed.
I have: ODroid-C2 + August DVB-T210 DVB-T2 stick (seems to be Geniatec 230?).
I need: A working built with support for that hardware. Perferrable not an alpha built, but if it's necessary...As mentioned, 7.0.2 is enough for me.
-
I have: ODroid-C2 + August DVB-T210 DVB-T2 stick (seems to be Geniatec 230?).
I need: A working built with support for that hardware. Perferrable not an alpha built, but if it's necessary...Why do you post in this thread? The Odroid C2 has no S805, it has a S905 SOC and is official supported.
Gerald
-
Why do you post in this thread? The Odroid C2 has no S805, it has a S905 SOC and is official supported.Sorry, my fault.
-
It is possible to use one of the build on Minix NEO X6? As I see it's working on Amlogic S805 with 1 GB RAM.
Thanks for your answers. -
erbeka Load it on SD card and try. Running from SD card is 100% safe as it doesn't modify firmware that is already installed.
-
CEC indeed fixed!!Thanx kszaq!!Merry Christmas guys!
Sent from my iPad using Tapatalk
-
kszaq please also update truecrypt addons from unofficial openelec
truecrypt githubUnfortunately this addon is not available in LE Github.
-
Great build thx
-
OP updated with a new build that includes a major set of patches that improve playback considerably. All thanks to @Peak3d who developed the patches. The build has also all updates from LE master branch.
-
Thanks successfully updated MXQ box and manually copied over remote.conf afterwards
Context menu button isn't working; there is a line in remote.conf 0x49 46 ;MENU
I'm thinking this needs changing, any ideas?
Cheers -
People with remote control issues:
- reboot your box
- press the buttons that do not work (and note the order of pressing)
- post result of the following: dmesg | paste and cat /tmp/remote.conf | paste
I have checked my boxes and all factory remotes work fine, I really need the logs to debug this. -
ok so the home key doesn't work aswell:
[ 310.635563@0] remote_send_key
[ 310.635743@0] press ircode = 0x53, scancode = 0x00ac, maptable = 0
[ 310.635823@0] remote_send_key sleep:0
[ 310.863809@0] remote_send_key
[ 310.864071@0] repeat ircode = 0x53, scancode = 0x00ac, maptable = 0
[ 310.864160@0] remote_send_key sleep:0
[ 310.972081@0] remote_send_key
[ 310.972211@0] repeat ircode = 0x53, scancode = 0x00ac, maptable = 0
[ 310.972257@0] remote_send_key sleep:0
[ 311.210759@0] remote_send_key
[ 311.210793@0] release ircode = 0x53, scancode = 0x00ac, maptable = 0
[ 311.210799@0] remote_send_key sleep:0The menu key is this:
[ 325.668737@0] remote_send_key
[ 325.669037@0] press ircode = 0x49, scancode = 0x002e, maptable = 0
[ 325.669126@0] remote_send_key sleep:0
[ 325.897346@0] remote_send_key
[ 325.897662@0] repeat ircode = 0x49, scancode = 0x002e, maptable = 0
[ 325.897755@0] remote_send_key sleep:0
[ 326.005602@0] remote_send_key
[ 326.005629@0] repeat ircode = 0x49, scancode = 0x002e, maptable = 0
[ 326.005635@0] remote_send_key sleep:0
[ 326.240909@0] remote_send_key
[ 326.241218@0] release ircode = 0x49, scancode = 0x002e, maptable = 0
[ 326.241313@0] remote_send_key sleep:0and the /tmp/remote.conf
# Visson S82 / Beelink S82 remote
factory_code = 0x7f800001
work_mode = 0
repeat_enable = 1
release_delay = 121
debug_enable = 1
reg_control = 0xfbe40key_begin
0x51 116 ;POWER
0x4d 66 ;MUTE
0x09 61 ;MEDIA
0x11 60 ;MUSIC
0x56 74 ;VOL-
0xbd 51 ;MEDIA_PREVIOUS
0xbb 52 ;MEDIA_NEXT
0x4e 78 ;VOL+
0x53 172 ;HOME
0x1b 14 ;EXIT
0x25 105 ;LEFT
0x26 103 ;UP
0x27 106 ;RIGHT
0x28 108 ;DOWN
0x0d 28 ;OK
0x49 46 ;MENU
0x31 2 ;NUM1
0x32 3 ;NUM2
0x33 4 ;NUM3
0x34 5 ;NUM4
0x35 6 ;NUM5
0x36 7 ;NUM6
0x37 8 ;NUM7
0x38 9 ;NUM8
0x39 10 ;NUM9
0x30 11 ;NUM0
0x44 111 ;DEL
key_end -
I've installed 7.90 beta1 as an update to 7.0.3.1 (MXQ version) running from SD card. 7.0.3.1 also runs from NAND.
The NAND version offers reboot and reboot from NAND when I select the power icon on the kodi main screen. The SD version only offers reboot.
Is this what should happen? I'm sure that I remember both versions offering reboot from NAND when I've used dual boot before.
-
sonofdibnah "Reboot from internal" is only available in Estuary Skin but should be always available.
-
Did some testing of Beta1 on my wetek hub yesterday. I was surprised how well this version coped with my file collection and tv setup.no problematic files found (hevc main and main10, h264 both 8 an 10 bit, mpeg4 in mkv and mp4 containers), chapter and manual skipping worked fine. Will continue testing with some of the older files (divx5, ogm and avi containers)MPEG-Dash with the latest inputstream for raspberry pi2 from kodinerds.de works fine with the youtube plugin (1080p youtube, yay!)twitch.tv plugin works fine, but I had one hiccup: when I selected a live stream that I played before, it offered to "continue at X:XX" (the duration of the last time I viewed it) and when I selected it, the box froze completely. Never saw this on Jarvis, but suspect the plugin as source of the problem. Sadly, it is not easily reproducedPVR with the tvheadend plugin works flawlessly, tested SD mpeg2 (576i), HD (h264 720p and 1080i) and 4k DVB-S2 transmissions). Channel switching times are slightly more than the latest Jarvis versionall remote buttons worked
Did not test audio passthrough yet.Sorry, wrong thread...
-