[8.2.3.1] LibreELEC 8.0 for S805

    PVR IPTV simple client does not recognize the group of channels in the playlist, i have only ALL CHANNELS :/

    Edit: Settings PVR & Live TV, enable synchronise channel groups with backend

    Edited once, last by Exp245 (December 25, 2016 at 6:24 PM).

    Help needed.

    I have: ODroid-C2 + August DVB-T210 DVB-T2 stick (seems to be Geniatec 230?).
    I need: A working built with support for that hardware. Perferrable not an alpha built, but if it's necessary...

    As mentioned, 7.0.2 is enough for me.

    Quote from jochen02


    I have: ODroid-C2 + August DVB-T210 DVB-T2 stick (seems to be Geniatec 230?).
    I need: A working built with support for that hardware. Perferrable not an alpha built, but if it's necessary...

    Why do you post in this thread? The Odroid C2 has no S805, it has a S905 SOC and is official supported.

    Gerald

    It is possible to use one of the build on Minix NEO X6? As I see it's working on Amlogic S805 with 1 GB RAM.
    Thanks for your answers.

    Edited once, last by erbeka (December 26, 2016 at 4:11 PM).

    OP updated with a new build that includes a major set of patches that improve playback considerably. All thanks to @Peak3d who developed the patches. The build has also all updates from LE master branch.

    Thanks successfully updated MXQ box and manually copied over remote.conf afterwards
    Context menu button isn't working; there is a line in remote.conf 0x49 46 ;MENU
    I'm thinking this needs changing, any ideas?
    Cheers

    People with remote control issues:

    • reboot your box
    • press the buttons that do not work (and note the order of pressing)
    • post result of the following: dmesg | paste and cat /tmp/remote.conf | paste


    I have checked my boxes and all factory remotes work fine, I really need the logs to debug this.

    ok so the home key doesn't work aswell:
    [ 310.635563@0] remote_send_key
    [ 310.635743@0] press ircode = 0x53, scancode = 0x00ac, maptable = 0
    [ 310.635823@0] remote_send_key sleep:0
    [ 310.863809@0] remote_send_key
    [ 310.864071@0] repeat ircode = 0x53, scancode = 0x00ac, maptable = 0
    [ 310.864160@0] remote_send_key sleep:0
    [ 310.972081@0] remote_send_key
    [ 310.972211@0] repeat ircode = 0x53, scancode = 0x00ac, maptable = 0
    [ 310.972257@0] remote_send_key sleep:0
    [ 311.210759@0] remote_send_key
    [ 311.210793@0] release ircode = 0x53, scancode = 0x00ac, maptable = 0
    [ 311.210799@0] remote_send_key sleep:0


    The menu key is this:
    [ 325.668737@0] remote_send_key
    [ 325.669037@0] press ircode = 0x49, scancode = 0x002e, maptable = 0
    [ 325.669126@0] remote_send_key sleep:0
    [ 325.897346@0] remote_send_key
    [ 325.897662@0] repeat ircode = 0x49, scancode = 0x002e, maptable = 0
    [ 325.897755@0] remote_send_key sleep:0
    [ 326.005602@0] remote_send_key
    [ 326.005629@0] repeat ircode = 0x49, scancode = 0x002e, maptable = 0
    [ 326.005635@0] remote_send_key sleep:0
    [ 326.240909@0] remote_send_key
    [ 326.241218@0] release ircode = 0x49, scancode = 0x002e, maptable = 0
    [ 326.241313@0] remote_send_key sleep:0


    and the /tmp/remote.conf
    # Visson S82 / Beelink S82 remote
    factory_code = 0x7f800001
    work_mode = 0
    repeat_enable = 1
    release_delay = 121
    debug_enable = 1
    reg_control = 0xfbe40

    key_begin
    0x51 116 ;POWER
    0x4d 66 ;MUTE
    0x09 61 ;MEDIA
    0x11 60 ;MUSIC
    0x56 74 ;VOL-
    0xbd 51 ;MEDIA_PREVIOUS
    0xbb 52 ;MEDIA_NEXT
    0x4e 78 ;VOL+
    0x53 172 ;HOME
    0x1b 14 ;EXIT
    0x25 105 ;LEFT
    0x26 103 ;UP
    0x27 106 ;RIGHT
    0x28 108 ;DOWN
    0x0d 28 ;OK
    0x49 46 ;MENU
    0x31 2 ;NUM1
    0x32 3 ;NUM2
    0x33 4 ;NUM3
    0x34 5 ;NUM4
    0x35 6 ;NUM5
    0x36 7 ;NUM6
    0x37 8 ;NUM7
    0x38 9 ;NUM8
    0x39 10 ;NUM9
    0x30 11 ;NUM0
    0x44 111 ;DEL
    key_end

    Edited once, last by punter (January 13, 2017 at 9:52 PM).

    I've installed 7.90 beta1 as an update to 7.0.3.1 (MXQ version) running from SD card. 7.0.3.1 also runs from NAND.

    The NAND version offers reboot and reboot from NAND when I select the power icon on the kodi main screen. The SD version only offers reboot.

    Is this what should happen? I'm sure that I remember both versions offering reboot from NAND when I've used dual boot before.

    Did some testing of Beta1 on my wetek hub yesterday. I was surprised how well this version coped with my file collection and tv setup.

    • no problematic files found (hevc main and main10, h264 both 8 an 10 bit, mpeg4 in mkv and mp4 containers), chapter and manual skipping worked fine. Will continue testing with some of the older files (divx5, ogm and avi containers)
    • MPEG-Dash with the latest inputstream for raspberry pi2 from kodinerds.de works fine with the youtube plugin (1080p youtube, yay!)
    • twitch.tv plugin works fine, but I had one hiccup: when I selected a live stream that I played before, it offered to "continue at X:XX" (the duration of the last time I viewed it) and when I selected it, the box froze completely. Never saw this on Jarvis, but suspect the plugin as source of the problem. Sadly, it is not easily reproduced
    • PVR with the tvheadend plugin works flawlessly, tested SD mpeg2 (576i), HD (h264 720p and 1080i) and 4k DVB-S2 transmissions). Channel switching times are slightly more than the latest Jarvis version
    • all remote buttons worked

    Did not test audio passthrough yet.

    Sorry, wrong thread...

    Edited once, last by mmpp (January 14, 2017 at 10:02 AM).