I cannot get my usb to download libreelec it keeps saying over and over again "fail to start xorg is your cpu supported" it wont download because of that..what do I do and how do I fix this?
New install on Intel NUC NUC10i7FNH1
- cashcow
-
February 21, 2020 at 2:27 PM - Thread is Unresolved
-
- Official Post
Is this about your "brand new NUC" in your previous forum topic? If so, which specific type of NUC is this about?
BTW, downloading something does not require specific video tasks. Meaning, "fail to start xorg is your cpu supported" is not about downloading, it's about something that is already installed. Correct? -
-
- Official Post
You need to use a nightly Milhouse LibreELEC build as that device is too new for the 9.2 version. Make sure the build uses kernel 5.5 atleast because that is needed to support the ethernet jack.
PS. That device is way overkill to run LibreELEC
-
- Official Post
LibreELEC-Generic.x86_64-9.80-Milhouse-20200220230737-#0220-g85b21f7.tar
see: LibreELEC Testbuilds for x86_64 (Kodi 19.0)
Don't blame the device. It's just really new so you need a very recent version of the linux kernel and other packages to support it
-
That tar link (first one) do I download it into a usb and try and boot it into this Nuc?
The other one all look German to me..I am too new to this..all I know is download into usb and boot onto my nuc and that's it..
The ssh and all that is alien to me and after all these years now I am terrified I cannot just use my usb as everything changes and its complex and alien to me..lord help me I love my libreelec..
from LibreELEC Testbuilds for x86_64 (Kodi 19.0)
Installing
You need a working LibreELEC system in order to install a test build. If you are starting from scratch, use an official LibreELEC disk image to create a USB disk installer and with that a working system on your SSD/HDD. Once you have a working system, install the test build by copying the tar file into your Update folder and reboot.so you need to download the libreelec AMD / Intel / nVidia – LibreELEC burn to usb using the image creator, when installed, copy tar to update folder.
-
After a little bit of playing around with LibreELEC-Generic.x86_64-9.80-nightly-20200324-aeb6e84.img.gz, I am happy to say that the NUC10i7FNH and NUC10i7FNK Frost Canyon Comet Lake NUCs are fully operational!!
I have an extensive local library with several high bit rate, 4K, Dolby ATMOS, DTS-HD files and they are all rocking!!
I did a clean build on both systems utilizing different types of drives and all seem to be working perfectly.
Both systems are running BIOS 39, 16GB RAM, and have the IR sensor configured as RC6. I am able to control both with my Harmony remote configured as a media center remote.
This should help with everyone's shelter in place!! Thank you all for the suggestions in getting these new NUCs up and running!!
Hope everyone is safe and well.
-
Display More
After a little bit of playing around with LibreELEC-Generic.x86_64-9.80-nightly-20200324-aeb6e84.img.gz, I am happy to say that the NUC10i7FNH and NUC10i7FNK Frost Canyon Comet Lake NUCs are fully operational!!
I have an extensive local library with several high bit rate, 4K, Dolby ATMOS, DTS-HD files and they are all rocking!!
I did a clean build on both systems utilizing different types of drives and all seem to be working perfectly.
Both systems are running BIOS 39, 16GB RAM, and have the IR sensor configured as RC6. I am able to control both with my Harmony remote configured as a media center remote.
This should help with everyone's shelter in place!! Thank you all for the suggestions in getting these new NUCs up and running!!
Hope everyone is safe and well.
I have the exact same setup with NUC10i7FNH. But I cannot get my Kodi to work with Atmos?
-
Hi,
My problem is that most add-ons are missing in the nightly builds.
The NUC10 works well, but without most addons its hard to make good case to use. Even the web-pdb addon is not working so its hard to debug the existing addon that I thought to port myself.
Anyway to run the previous version of KODI on the NUC10? Maybe re-build it?
-
Display More
After a little bit of playing around with LibreELEC-Generic.x86_64-9.80-nightly-20200324-aeb6e84.img.gz, I am happy to say that the NUC10i7FNH and NUC10i7FNK Frost Canyon Comet Lake NUCs are fully operational!!
I have an extensive local library with several high bit rate, 4K, Dolby ATMOS, DTS-HD files and they are all rocking!!
I did a clean build on both systems utilizing different types of drives and all seem to be working perfectly.
Both systems are running BIOS 39, 16GB RAM, and have the IR sensor configured as RC6. I am able to control both with my Harmony remote configured as a media center remote.
This should help with everyone's shelter in place!! Thank you all for the suggestions in getting these new NUCs up and running!!
Hope everyone is safe and well.
My question: do Bluetotth and Wi-Fi work well under LE?
-
JiRo - BT and WiFi in recent nightlies should be fine on the NUCs. The LibreELEC addon has recently been updated to support BT/WiFi.
