List of S905/S905X Boxes that work with kszaq's build

kashmoney · October 16, 2016 at 11:31 PM

Hey Everyone

Lets start a llist of all known good boxes to purchase that work with kszaq's LibreELEC builds.

Boxes To Buy:

Beelink MiniMX S905 1GB/8GB
Beelink MiniMX v1.0 S905 2GB/16GB
Beelink MiniMXIII S905 2GB/16GB
Beelink M18 S905 2GB/16GB
Mini M8S S905 1GB/8GB
MXQ Pro S905 1GB/8GB
Nexbox MXQ Pro S905 1GB/8GB
Sunvell T95 S905 1GB/8GB
Sunvell T95 S905 2GB/8GB
Tanix TX3 S905 1GB/8GB

Beelink MiniMXIII II S905X 2GB/16GB
Mini M8S II S905X 1GB/8GB
Mini M8S II S905X 2GB/8GB
Mini M8S II S905X 2GB/16GB
Nexbox A5 S905X 2GB/16GB
Nexbox A95X-B7N S905X 2GB/16GB
Sunvell T95X S905X 1GB/8GB
Sunvell T95X S905X 2GB/8GB
Scishion V88 Pro S905X 1GB/8GB
Tanix TX3 Pro S905X 1GB/8GB
Tanix TX5 S905X 2GB/8GB
Tanix TX5 Pro S905X 2GB/16GB

Boxes Not to Buy:
(none)

If you have a box that works that is not listed please post and I will update the list above.

kodiuser1 · October 16, 2016 at 11:35 PM

This one seems to work
Works wonderfully here. After trying many different devices (Pivos, Raspberry PI 1+2, Zotac PI320, ...) this build in combination with a Nexbox a95x (s905x/2gb version) finally plays back all my content without dropping *any* frames and at correct framerates. It's great to finally have a working 23.976fps mode again.

kashmoney · October 16, 2016 at 11:43 PM

Quote from kodiuser1

This one seems to work
Works wonderfully here. After trying many different devices (Pivos, Raspberry PI 1+2, Zotac PI320, ...) this build in combination with a Nexbox a95x (s905x/2gb version) finally plays back all my content without dropping *any* frames and at correct framerates. It's great to finally have a working 23.976fps mode again.

would that be the Nexbox A95X-B7N 2GB/8GB or 2GB/16GB or the Nexbox A95X?

please let me know

kostaman · October 16, 2016 at 11:46 PM

Quote from kashmoney

Hey Everyone

Lets start a llist of all known good boxes to purchase that work with kszaq's LibreELEC builds.

Beelink MiniMX 1GB/8GB
Beelink MiniMX v1.0 2GB/16GB
Beelink MiniMXIII 2GB/16GB

If you have a box that works that is not listed please post and I will update the list above.

#1

Already started by someone. See Link

kodiuser1 · October 16, 2016 at 11:56 PM

I would assume both the 2gb ones work but check with sagacity it. Was his post

kashmoney · October 16, 2016 at 11:57 PM

Quote from kostaman

#1

Already started by someone. See Link

the OP only had 1 box listed and i assumed it was for all Amlogic i just wanted a S905/S905X list. something simple and easy

kodiuser1 · October 17, 2016 at 12:35 AM

@ pawnthep Wrote:

Tested on Nexbox A95X S905X (2g/16g):
- boot from SD card --- ok
- install to NAND using ssh script from SD card -- ok
- CEC, Wifi 2.4/5 ghz, bluetooth, lan, dvb-t2 Mygica T203 -- all ok
[hr]

Quote

kodiuser1 Wrote: Please let us know how it goes. I'm thinking of getting a VONTAR T95 box as well.

Works perfect mate

gazrob Wrote:

Quote

Works perfect mate

Although mine is a sunvell t95

Check with gazrob his specs
[hr]
If im not helping let me know

GDPR-2 · October 17, 2016 at 3:03 AM

Both TX3 (S905) and TX3 Pro (S905X) work

kashmoney · October 17, 2016 at 3:10 AM

Quote from adamg

Both TX3 (S905) and TX3 Pro (S905X) work

thanks for the info

JonSnow · October 17, 2016 at 3:46 AM

Why is the MXIII II set to do not buy? I assume its coz of lack of BT/WiFi drivers. If so may want to add that so people know the reason.

Anyhow MXQ PRO 4K V1 blue board (1511) working perfectly with 007. Power off/on from remote, wifi, lan.

I hope the list for working devices means power off/on, wifi, bluetooth, remote and SPDIF (some may want it). Otherwise the list should be broken down further.

I can confirm the MXIII S905 and MXQ s905 is fully functional as stated above.

**chewitt** · October 17, 2016 at 3:57 AM Official Post

I'd like to stop this thread. If you want a hardware listing it should be in a maintained wiki page not a forum thread that very quickly becomes 20+ pages and hard to follow. I would also ask you to refrain from using the terms "to buy" and "not to buy" as forum rules ask you not to promote commercial products (and we'll extend the same idea to the wiki). I would also prefer if the eventual wiki page had a consistent maintainer who keeps the content up-to-date as LE software and vendor firmware evolves, i.e. not a free for all. Make sense?

kostaman · October 17, 2016 at 4:02 AM

Quote from chewitt

I'd like to stop this thread. If you want a hardware listing it should be in a maintained wiki page not a forum thread that very quickly becomes 20+ pages and hard to follow. I would also ask you to refrain from using the terms "to buy" and "not to buy" as forum rules ask you not to promote commercial products (and we'll extend the same idea to the wiki). I would also prefer if the eventual wiki page had a consistent maintainer who keeps the content up-to-date as LE software and vendor firmware evolves, i.e. not a free for all. Make sense?

Totally agree.
This was going to get well out of control.

kashmoney · October 17, 2016 at 4:07 AM

Quote from chewitt

I'd like to stop this thread. If you want a hardware listing it should be in a maintained wiki page not a forum thread that very quickly becomes 20+ pages and hard to follow. I would also ask you to refrain from using the terms "to buy" and "not to buy" as forum rules ask you not to promote commercial products (and we'll extend the same idea to the wiki). I would also prefer if the eventual wiki page had a consistent maintainer who keeps the content up-to-date as LE software and vendor firmware evolves, i.e. not a free for all. Make sense?

i had originally posted for kszaq to provide a list of boxes that work with his firmware however i was told to make a new thread as it wouldnt be able to be known which boxes work and dont by kszaq. i was just going thru all the seperate threads and finding all the models that actually work.

if you want me to stop then i shall. i was just going to update the OP each time someone posted a working model.

**kszaq** · October 17, 2016 at 5:54 AM

My firmware is aimed to work on most S905/X devices. I have no list of boxes that work because except for officialy supported devices I own only 1 S905 and 1 S905X box.

sagacity · October 17, 2016 at 9:50 AM

Quote from kashmoney

would that be the Nexbox A95X-B7N 2GB/8GB or 2GB/16GB or the Nexbox A95X?

It's the S905X 2GB/8GB variant. Not sure if it's specifically "B7N" though, where can I check that?

ippon · October 17, 2016 at 11:25 AM

Quote from adamg

Both TX3 (S905) and TX3 Pro (S905X) work

Hi adamg. I have a brand new TX3 Pro and I've installed 7.0.2.008 with gxl_p212_1g.dtb device tree on SD. It works, but the remote control doesn't work. Have you done samething special?

kashmoney · October 17, 2016 at 5:22 PM

Quote from sagacity

It's the S905X 2GB/8GB variant. Not sure if it's specifically "B7N" though, where can I check that?

if i may ask where did u buy it? can u pm me im pretty sure its the B7N as only the B7N is the S905X

kodiuser1 · October 17, 2016 at 11:09 PM

Which do you think is a better choice, for speed and video play and future longlivity a S905 or a S905X chip?
From what I have read there really is no difference at the moment because S905X has a hard time processing some formats any way.