Early community images for H3, H6 and A64

goosh · March 24, 2019 at 6:05 PM

Quote from mmad11

New image work on RPi one plus, but built-in ethernet card not working and display resolution 1024x768, other resolutions not working

Do you enforce display resolution upon boot up? If so could you please share your extlinux.conf?

macchese · March 25, 2019 at 5:18 PM

@jernej HDMI cec now it's ok.I have now a problem with plugin installation

**jernej** · March 25, 2019 at 5:37 PM Official Post

macchese are you sure you are using my latest update from yesterday? I fixed addon repository issue. At least it should be.

deltaray · March 26, 2019 at 2:28 PM

Can somebody create sun50i-h6-orangepi-one-plus.dtb / sun50i-h6-orangepi-lite2.dtb files from here?

linux/arch/arm64/boot/dts/allwinner at master · torvalds/linux · GitHub

I dont have the dev environment at the moment.

I can boot up LibreELEC-H6.arm-9.1-devel-20190324150149-b764cb6-pine_h64 on my Orange Pi H6 3 but almost no drivers are available.

mr_d · March 26, 2019 at 3:04 PM

how about passthrough on H3 boards? Is there any solution?

**jernej** · March 26, 2019 at 4:58 PM Official Post

deltaray that device tree is missing HDMI, so it's not very helpful. Besides, H6 based OrangePis need support for ddc regulator which is not yet added to mainline hdmi driver. Without this, you'll always have a default resolution, which is 1024x768. Wait a week or two until I get one of those boards (hopefully).

mr_d passtrough is still under development. Last time I checked, it's close to being ready, but there is no ETA.

mr_d · March 26, 2019 at 6:00 PM

jernej

thank you for the information.

deltaray · March 27, 2019 at 6:28 AM

Quote from jernej

deltaray that device tree is missing HDMI, so it's not very helpful. Besides, H6 based OrangePis need support for ddc regulator which is not yet added to mainline hdmi driver. Without this, you'll always have a default resolution, which is 1024x768. Wait a week or two until I get one of those boards (hopefully).

Thanks for the update. Overall the device appears to be fast, but OrangePI software support is as always terrible.

miduman · March 27, 2019 at 2:11 PM

Hello I have an orangepi-pc and I've been following the thread since the beginning, now I have libreelec 6 and I'm doing very well but I want to try 9.1 and see that the script.bin is not used now, I need to modify the video input manually because it goes through the dvi port and does not detect it automatically. What should I modify now to select it manually?

Thankyou.

marcins · March 27, 2019 at 5:45 PM

jernej
There is problem on latest update with Inadyn plugin.
http://ix.io/1edb

There are missing libssl.so.1.0.0 because now is a libssl.so.1.1. I tried create symbolic link in Userdata\library to the libssl.so.1.1 but it's not working.
Any idea?

macchese · March 27, 2019 at 6:04 PM

@jernej It'all ok.HDMI CEC and Libreelec addons.Thank you very much

**jernej** · March 27, 2019 at 6:13 PM Official Post

marcins I guess I need to rebuild addons. This will take awhile.

icehot · March 27, 2019 at 6:34 PM

Hi, thanks for the job jernej!

I currently have openelec 7 version in a orangepi plus 2e and it works great.

To change to LE9 I would need to be able to install on the emmc.

How to install in emmc?

Thanks!!!

**jernej** · March 27, 2019 at 7:36 PM Official Post

emmc installation is not yet supported. But if you are good enough with disk utilities, you can do it by hand.

**5schatten** · March 27, 2019 at 7:52 PM

Quote from icehot

Hi, thanks for the job jernej!

I currently have openelec 7 version in a orangepi plus 2e and it works great.

To change to LE9 I would need to run a*******m and be able to install on the emmc.

Does anyone know if you can install a*******m in this version?

How to install in emmc?

Thanks!!!

Display More

https://kodi.wiki/view/official:forum_rules/banned_add-ons#add-on_blacklist

**Klojum** · March 27, 2019 at 7:52 PM Official Post

Quote from icehot

Does anyone know if you can install ******** in this version?

Apparently someone hasn't read our forum rules very well during the forum registration. Any repository or add-on that is on Kodi's banned add-on list (or shows similar behavior such as facilitating video piracy) will instantly result in halting our support here.

You're kindly requested to you get your support from wherever you downloaded that bunch of crap.

dalmif · March 27, 2019 at 9:42 PM

jernej

can LibreElec connect To Ethernet on board if our board not support wi-fi ?

**jernej** · March 27, 2019 at 10:28 PM Official Post

sure