Geniatech Mygica HDStar DVB-S2 USB HD not working

erbas · January 30, 2020 at 4:33 AM

Quote from crazycat

my media_build updated, must support up to 5.5 kernels

m88ds3103 frontend driver now with ds3103b support from Brad Love media_tree

ds3103b specific firmware included dvb-firmwares.tar.bz2

crazycat

I didn't find the dvb-usb-id5520se for TBS5520SE in the zip.

Do you have any information about it?

sdf · January 30, 2020 at 7:37 PM

Quote from crazycat

please from stable 5,3 kernel ubuntu 19.10 (or latest 18.04.xx LTS with hwe kernel 5.3 now).

P.S. 5,5 kernel support some buggy with current media_build

here it is (ubuntu 19.10 5.3.0 kernel)

External Content pastebin.com

Content embedded from external sources will not be displayed without your consent.

Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

thank you,

sdf

stpf99 · February 12, 2020 at 4:00 PM

for my device "terratec cinergy S2 rev.4" drivers included in this ubuntu repository working perfect

Ubuntu kernel + LinuxTV media tree + Hauppauge patches : Brad Love also should be working for technotrend tt-connect s2-4600 with 3103b chip version, maybe others too...

sdf · February 15, 2020 at 10:16 AM

Just an update.

Compiled successfully and perfectly working against latest ubuntu kernel 5.5.3

Thank you Crazycat!

sdf

sdf · February 23, 2020 at 8:48 AM

Tried new Milhouse builds, but seems that "crazycat tbs drivers" are from "linux-tbs-drivers" repository and not from "media_build" one.

So in Libreleelec we have three drivers to choose from: normal, media_build (not Crazycat's) and Crazycat tbs.

Unfortunately neither of them has support for our hdstar v3.

There's no possibility to include Crazycat media_build in future releases?

Thank you,

sdf

stpf99 · February 25, 2020 at 6:22 PM

here is patch for 3103b for upstream kernel Linux V4L/DVB mailing list - Patchwork

**CvH** · February 26, 2020 at 11:20 AM Official Post

Quote from stpf99

here is patch for 3103b for upstream kernel

likely its the same that does not build with latest kernels, he wanted to push a fix for it soon so it should be doable soon

sdf · February 26, 2020 at 11:38 AM

Quote from CvH

likely its the same that does not build with latest kernels, he wanted to push a fix for it soon so it should be doable soon

wonderful!

thank you,

sdf

sdf · March 8, 2020 at 6:58 AM

Crazycat,

just to say that with your media_build latest version had a compile error against kernel 5.5.8

normal media_build (linuxtv.org) compiles normally

will try with 5.6 rc

thank you,

sdf

sdf · March 8, 2020 at 7:30 AM

Forgot compile log, sorry

External Content pastebin.com

Content embedded from external sources will not be displayed without your consent.

Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

stpf99 · March 8, 2020 at 2:24 PM

Quote from CvH

likely its the same that does not build with latest kernels, he wanted to push a fix for it soon so it should be doable soon

this patchset have only one "Warrning" when compile media_build from linuxtv and works

Ubuntu-media-tree-kernel-builder/patches/mainline-extra/tip/80.montage.3103b at master · b-rad-NDi/Ubuntu-media-tree-kernel-builder · GitHub try this, if 3103b devices included works with upstream media_build you can create additional pack for testing dvb drivers something like "media_build from upstram + occasional patches"

**crazycat** · March 8, 2020 at 7:58 PM

Quote from sdf

just to say that with your media_build latest version had a compile error against kernel 5.5.8

normal media_build (linuxtv.org) compiles normally

Fixed, try again.

sdf · March 9, 2020 at 12:48 PM

Fixed and working

Thank you,

sdf

Meiden · March 22, 2020 at 9:02 PM

Compiled last crazycat's media_build over kernel 5.3.0-42-generic in Ubuntu 18.04.

My HDStar still fails:

Code

[269757.290648] dw2102: su3000_identify_state
[269757.290651] dvb-usb: found a 'SU3000HD DVB-S USB2.0' in warm state.
[269757.290660] dw2102: su3000_power_ctrl: 1, initialized 0
[269757.291037] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[269757.291396] dvbdev: DVB: registering new adapter (SU3000HD DVB-S USB2.0)
[269757.291402] usb 1-6: media controller created
[269757.295526] dvb-usb: MAC address: 00:af:78:66:2e:de
[269757.296413] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[269757.639718] Invalid probe, probably not a DS3000
[269757.639732] dvb-usb: no frontend was attached by 'SU3000HD DVB-S USB2.0'
[269757.672217] Registered IR keymap rc-su3000
[269757.672341] rc rc0: SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:15.0/usb1/1-6/rc/rc0
[269757.672443] input: SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:15.0/usb1/1-6/rc/rc0/input12
[269757.672696] rc rc0: lirc_dev: driver dw2102 registered at minor = 0, scancode receiver, no transmitter
[269757.672700] dvb-usb: schedule remote query interval to 150 msecs.
[269757.672705] dw2102: su3000_power_ctrl: 0, initialized 1
[269757.672707] dvb-usb: SU3000HD DVB-S USB2.0 successfully initialized and connected.
[269757.672789] usbcore: registered new interface driver dw2102

Display More

... I'm probably doing something wrong.

Installation steps that I've followed:

git clone Bitbucket

cd media_build

make distclean

make

sudo make install

**crazycat** · March 22, 2020 at 11:19 PM

remove kernel media modules before install.

see install.sh script in media_build

P.S. my media_buidl updated, m88ds3103b support now from main-line media_tree

media_tree.git - Upstream media tree for Remote Controllers, V4L and DVB

Meiden · March 23, 2020 at 8:43 PM

OK, it is working now. But I have my dmesg log flooded by:

Code

[  671.614860] dw2102: su3000_identify_state
[  671.614863] dvb-usb: found a 'SU3000HD DVB-S USB2.0' in warm state.
[  671.614874] dw2102: su3000_power_ctrl: 1, initialized 0
[  671.615241] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  671.615478] dvbdev: DVB: registering new adapter (SU3000HD DVB-S USB2.0)
[  671.615484] usb 1-6: media controller created
[  671.619659] dvb-usb: MAC address: 00:af:78:66:2e:de
[  671.620254] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[  671.955776] dw2102: i2c read request failed: i2c status 7
[  671.956003] dw2102: i2c read request failed: i2c status 7
[  671.956006] Invalid probe, probably not a DS3000
[  671.956022] dw2102: su3000_frontend_attach: attaching demodulator of type m88ds3103b at i2c address 0x6a
[  671.970143] i2c i2c-5: Added multiplexed i2c bus 6
[  671.971653] m88ds3103 5-006a: dt addr is 0x21
[  672.031898] ts2020 6-0060: Montage Technology TS2022 successfully identified
[  672.031995] usb 1-6: DVB: registering adapter 0 frontend 0 (Montage Technology M88RS6000)...
[  672.032010] dvbdev: dvb_create_media_entity: media entity 'Montage Technology M88RS6000' registered.
[  672.066530] Registered IR keymap rc-su3000
[  672.066708] rc rc0: SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:15.0/usb1/1-6/rc/rc0
[  672.066930] rc rc0: lirc_dev: driver dw2102 registered at minor = 0, scancode receiver, no transmitter
[  672.067119] input: SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:15.0/usb1/1-6/rc/rc0/input12
[  672.067297] dvb-usb: schedule remote query interval to 150 msecs.
[  672.067305] dw2102: su3000_power_ctrl: 0, initialized 1
[  672.067307] dvb-usb: SU3000HD DVB-S USB2.0 successfully initialized and connected.
[  672.067513] usbcore: registered new interface driver dw2102
[  672.121793] dw2102: su3000_power_ctrl: 1, initialized 1
[  672.122033] dw2102: i2c read request failed: i2c status 7
[  672.122442] dw2102: i2c read request failed: i2c status 7
[  672.122901] dw2102: i2c read request failed: i2c status 7
[  672.123380] dw2102: i2c read request failed: i2c status 7
[  672.130713] dw2102: i2c read request failed: i2c status 7
[  672.131085] dw2102: i2c read request failed: i2c status 7
[  672.131440] dw2102: i2c read request failed: i2c status 7
[  672.131498] usb 1-6: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
[  672.133116] dw2102: i2c read request failed: i2c status 7
[  672.133653] dw2102: i2c read request failed: i2c status 7
[  672.134043] dw2102: i2c read request failed: i2c status 7
[  672.134490] dw2102: i2c read request failed: i2c status 7
[  672.140918] dw2102: i2c read request failed: i2c status 7
[  672.141291] dw2102: i2c read request failed: i2c status 7
[  672.141715] dw2102: i2c read request failed: i2c status 7
[  674.155095] dw2102: i2c read request failed: i2c status 7
[  674.155637] dw2102: i2c read request failed: i2c status 7
[  674.156114] dw2102: i2c read request failed: i2c status 7
[  676.171095] dw2102: i2c read request failed: i2c status 7
[  676.171635] dw2102: i2c read request failed: i2c status 7
[  676.172113] dw2102: i2c read request failed: i2c status 7
[  678.187110] dw2102: i2c read request failed: i2c status 7
[  678.187678] dw2102: i2c read request failed: i2c status 7
[  678.188204] dw2102: i2c read request failed: i2c status 7

Display More

sdf · March 24, 2020 at 1:43 PM

For me compile error with latest 5.5.11 kernel

Same error with linuxtv media_build

External Content pastebin.com

Content embedded from external sources will not be displayed without your consent.

Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

Thank you

sdf

Booza · March 25, 2020 at 10:20 AM

Quote from Meiden

OK, it is working now.

Hi Meiden. Are you using a Rpi?

Would be good to know if anyone has the HD Star v3 or equivalent working on RPi and if so what they are using to give me something to persist with? I've lost countless hours now and all I've got to show for it is a bit more familiarity with the command line.